TN WTB 5 on 5 8" wide - The 1947 - Present Chevrolet & GMC Truck Message Board Network

llbell08 · 05-23-2011, 07:31 PM

Anyone know where I can get two wheel that are 5 on 5 8" wide that I use my dog dish hubcap with. Thanks

DesertCat · 05-23-2011, 08:47 PM

Only thing I have found, and I've asked here...

http://www.summitracing.com/parts/WVI-62-5805044/

Good price if you ask me...

darkhorse970 · 05-23-2011, 09:06 PM

Quote:

Originally Posted by DesertCat

Only thing I have found, and I've asked here...

http://www.summitracing.com/parts/WVI-62-5805044/

Good price if you ask me...

Can anyone confirm that these will work with stock dog dish hubcaps?

DesertCat · 05-23-2011, 09:08 PM

According to WV they will fit the stock 10.125" caps.

llbell08 · 05-23-2011, 09:10 PM

Thanks for information. I'll give them a call and ask about if the dog dish will fit. Will post the answer.

**special-K** · 05-24-2011, 08:27 AM

Why don't they make 10x15s in 5 on 5??? It drives me crazy!:craxy:

Leroy-B1 · 05-24-2011, 08:47 AM

Signing on to see results
Posted via Mobile Device

DesertCat · 05-24-2011, 11:13 AM

Quote:

Originally Posted by special-K

Why don't they make 10x15s in 5 on 5??? It drives me crazy!:craxy:

Okay okay... don't go crazy

Just for you....

I looked up the p/n on WV's website, and plugged it into Summit and...

http://www.summitracing.com/parts/WVI-62-5005042/

89 bucks each!

**Hart_Rod** · 05-24-2011, 01:43 PM

Quote:

Originally Posted by DesertCat

Okay okay... don't go crazy

Just for you....

I looked up the p/n on WV's website, and plugged it into Summit and...

http://www.summitracing.com/parts/WVI-62-5005042/

89 bucks each!

Sweet!!!

Leroy-B1 · 05-24-2011, 03:36 PM

Wonder what the backspace is on those 10's
Posted via Mobile Device

DesertCat · 05-24-2011, 03:54 PM

Quote:

Originally Posted by Leroy-B1

Wonder what the backspace is on those 10's
Posted via Mobile Device

http://www.wheelvintiques.com/index.php/products/

4.5"

**Hart_Rod** · 05-24-2011, 04:42 PM

I wish they would build a 18 or 20" truck ralley wheel.....

CEE1NG_RED · 05-24-2011, 06:29 PM

Quote:

Originally Posted by Leroy-B1

Wonder what the backspace is on those 10's
Posted via Mobile Device

Leroy-B1...can you please answer your PMs. Thanks!

**special-K** · 05-24-2011, 10:46 PM

Quote:

Originally Posted by DesertCat

Okay okay... don't go crazy

Just for you....

I looked up the p/n on WV's website, and plugged it into Summit and...

http://www.summitracing.com/parts/WVI-62-5005042/

89 bucks each!

I checked before I posted and checked again. I still don't see 10 x 15s listed in 5 on 5. They offer 4.5",4.75",and 5.5" but no 5" from what I see

DesertCat · 05-24-2011, 11:56 PM

Quote:

Originally Posted by special-K

I checked before I posted and checked again. I still don't see 10 x 15s listed in 5 on 5. They offer 4.5",4.75",and 5.5" but no 5" from what I see

Summit is kinda funny... they actually have more stuff than they put on their site when you search using their links.

How I found them was by punching in WV's part number - bam! There it was!

try the link I sent again.

DesertCat · 05-25-2011, 12:03 AM

Go here http://www.wheelvintiques.com/index.php/products/ find page 32.

Part number 62-5005042 is the 15x10, 5x5. That is the number I punched into Summit and the link I posted is that part.

Hope what I have been saying makes sense to someone besides myself

**special-K** · 05-25-2011, 06:59 AM

Thanks for the page number. I went to that link before,but didn't feel like searching all 64 pages. Now I just can't read the print,too small and blurry. But I'll take your word. I know when I searched the product,62 Series,I narrowed the search to 15" diameter then 10" width and the 5" bolt pattern drops off the search options. And when I combed through the 4 pages of 62s they have no 5 on 5 listed. I'll call Wheel Vintiques. Summit only recently started selling their stuff. I know of many other vendors.

68Stepbed · 05-27-2011, 06:06 PM

I know a guy in Lenoir City, TN that has 2 original 15x8's already blasted and painted black. He wants $100 for them. I was gonna buy them, but just didn't want to let go of a bill at the time.

PM me for his contact info

Leroy-B1 · 05-27-2011, 11:40 PM

Matt, sent pm on those wheels let me know about them if you dont care not to far away and need to for my 67 i changed over to five lug and can run the stock caps on, dont want to do bands if i can help it

llbell08 · 05-28-2011, 11:14 AM

If you would put me second in line me for a pm with the information for the rims. Thanks

**special-K** · 05-28-2011, 02:04 PM

Quote:

Originally Posted by llbell08

If you would put me second in line me for a pm with the information for the rims. Thanks

I figured Matt posted that for you since this is your WTB thread. You should have 1st dibs.

05-23-2011, 07:31 PM	#1
llbell08 Registered User Join Date: Aug 2010 Location: Christiana, TN Posts: 15	WTB 5 on 5 8" wide Anyone know where I can get two wheel that are 5 on 5 8" wide that I use my dog dish hubcap with. Thanks Last edited by llbell08; 05-23-2011 at 07:34 PM.

05-23-2011, 08:47 PM	#2
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: WTB 5 on 5 8" wide Only thing I have found, and I've asked here... http://www.summitracing.com/parts/WVI-62-5805044/ Good price if you ask me... __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-23-2011, 09:08 PM	#4
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: WTB 5 on 5 8" wide According to WV they will fit the stock 10.125" caps. __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-23-2011, 09:10 PM	#5
llbell08 Registered User Join Date: Aug 2010 Location: Christiana, TN Posts: 15	Re: WTB 5 on 5 8" wide Thanks for information. I'll give them a call and ask about if the dog dish will fit. Will post the answer.

05-24-2011, 08:27 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB 5 on 5 8" wide Why don't they make 10x15s in 5 on 5??? It drives me crazy!:craxy: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-24-2011, 08:47 AM	#7
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB 5 on 5 8" wide Signing on to see results Posted via Mobile Device

05-24-2011, 03:36 PM	#10
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB 5 on 5 8" wide Wonder what the backspace is on those 10's Posted via Mobile Device

05-24-2011, 04:42 PM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,840	Re: WTB 5 on 5 8" wide I wish they would build a 18 or 20" truck ralley wheel..... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-25-2011, 12:03 AM	#16
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: WTB 5 on 5 8" wide Go here http://www.wheelvintiques.com/index.php/products/ find page 32. Part number 62-5005042 is the 15x10, 5x5. That is the number I punched into Summit and the link I posted is that part. Hope what I have been saying makes sense to someone besides myself __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

05-25-2011, 06:59 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB 5 on 5 8" wide Thanks for the page number. I went to that link before,but didn't feel like searching all 64 pages. Now I just can't read the print,too small and blurry. But I'll take your word. I know when I searched the product,62 Series,I narrowed the search to 15" diameter then 10" width and the 5" bolt pattern drops off the search options. And when I combed through the 4 pages of 62s they have no 5 on 5 listed. I'll call Wheel Vintiques. Summit only recently started selling their stuff. I know of many other vendors. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-27-2011, 06:06 PM	#18
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: WTB 5 on 5 8" wide I know a guy in Lenoir City, TN that has 2 original 15x8's already blasted and painted black. He wants $100 for them. I was gonna buy them, but just didn't want to let go of a bill at the time. PM me for his contact info __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

05-27-2011, 11:40 PM	#19
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: WTB 5 on 5 8" wide Matt, sent pm on those wheels let me know about them if you dont care not to far away and need to for my 67 i changed over to five lug and can run the stock caps on, dont want to do bands if i can help it

05-28-2011, 11:14 AM	#20
llbell08 Registered User Join Date: Aug 2010 Location: Christiana, TN Posts: 15	Re: WTB 5 on 5 8" wide If you would put me second in line me for a pm with the information for the rims. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.