Is there a gasket for fenders? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 03-30-2003, 08:23 PM

Is there a gasket to go between fenders and bed on a stepside?
I just pulled some toolboxes off of it and looks like remains of a gasket.

If there is, where can I get a pair?

JimKshortstep4x4 · 03-30-2003, 08:32 PM

There is "gasketing", and its called fender welting. It works well. Try the vendors on the board, they should be able to get a pair for you if you want them. Fender welting is not expensive, less than $15/pr.

JIm

krue · 03-30-2003, 10:34 PM

In the interests of time can I skip it for now and use it later (after paint job)?

JimKshortstep4x4 · 03-31-2003, 08:50 AM

I painted mine first, glued the welts in place using 3M adhesive, burned the holes out with a soldering iron, and applied sealant to the welting before bolting the fender up. The joint is water tight!

Jim

03-30-2003, 08:23 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Is there a gasket for fenders? Is there a gasket to go between fenders and bed on a stepside? I just pulled some toolboxes off of it and looks like remains of a gasket. If there is, where can I get a pair? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

03-30-2003, 10:34 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	In the interests of time can I skip it for now and use it later (after paint job)? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-30-2003, 08:32 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	There is "gasketing", and its called fender welting. It works well. Try the vendors on the board, they should be able to get a pair for you if you want them. Fender welting is not expensive, less than $15/pr. JIm

03-31-2003, 08:50 AM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I painted mine first, glued the welts in place using 3M adhesive, burned the holes out with a soldering iron, and applied sealant to the welting before bolting the fender up. The joint is water tight! Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.