OH Transmissions 3 and 4 speed w/shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

treeboy97 · 06-22-2011, 11:50 AM

I have two transmission up for grabs.

I have the original 3 speed from my 70 C10, it was behind a 250 removed at 84000 miles 75 bucks, no linkage or shifter

I have a Saginaw 4 speed with a Hurst shifter and all the linkage asking 400, worked great, just didn't allow me to hit the highway. I will throw in the trifive shifter, it will work with a benchseat.

I installed a t5 behind the 250 and don't need these anymore.

At this time, no shipping, located in Springfield Oh

Thanks.

06-22-2011, 11:50 AM	#1
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	Transmissions 3 and 4 speed w/shifter I have two transmission up for grabs. I have the original 3 speed from my 70 C10, it was behind a 250 removed at 84000 miles 75 bucks, no linkage or shifter I have a Saginaw 4 speed with a Hurst shifter and all the linkage asking 400, worked great, just didn't allow me to hit the highway. I will throw in the trifive shifter, it will work with a benchseat. I installed a t5 behind the 250 and don't need these anymore. At this time, no shipping, located in Springfield Oh Thanks. __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.