The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-23-2011, 08:56 PM   #1
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Should I Wash It?

I bought my truck about a month ago. I've fixed all the electrical issues, replaced the starter and battery, rebuilt the carb, restored the gas tank and sorted some other misc. things. I just need to put on the tires and exhaust before I take it on its first shakedown run. My question is this: When I shake it down enough to take it out for a real drive I wanna take it to a cruise night. I haven't even pulled the first leaf outta the cowl or disturbed the grease on the engine. Sould I take it to work first and blow it out and power wash everything or take it like it is?
I like the idea of going Ruff-N-Ready, but I can't help but think climbing all over it with an air hose, degreaser and the pressure washer might be prudent. Gimme your opinion.
BMERDOC is offline   Reply With Quote
Old 06-23-2011, 08:57 PM   #2
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Should I Wash It?

I wouldn't pressure wash an old vehicle. If you do... you'll definately find out where it leaks.

Just a normal wash job with a hose and mild car wash.

gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.
GASoline71 is offline   Reply With Quote
Old 06-23-2011, 09:01 PM   #3
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Re: Should I Wash It?

Shoulda specified. I was thinking motor, trans and suspension. Shouldn't find too many leaks like that. Nothin I couldn't take care of anyway. I'd do a normal wash on the body.
BMERDOC is offline   Reply With Quote
Old 06-23-2011, 09:16 PM   #4
Frkypunk70
Registered User
 
Frkypunk70's Avatar
 
Join Date: Mar 2010
Location: Scranton,Pa
Posts: 423
Re: Should I Wash It?

I personally like it when plants are growing out of the back, and the vents are filled with leaves. Hell, keep the tree branches between the bumpers.
Posted via Mobile Device
__________________
"When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car. "
Frkypunk70 is offline   Reply With Quote
Old 06-23-2011, 10:24 PM   #5
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: Should I Wash It?

Quote:
Originally Posted by GASoline71 View Post
I wouldn't pressure wash an old vehicle. If you do... you'll definately find out where it leaks.

Just a normal wash job with a hose and mild car wash.

gary

Even with a restored truck I will do a hand wash only verses a power wash. JMHO
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 06-23-2011, 10:31 PM   #6
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Re: Should I Wash It?

wash it and wax it if it still has paint on it... I usually start with a power wash under the hood and body before I ever get them home.
You can't find whats wrong when you can't see the parts.
Longhorn Man is offline   Reply With Quote
Old 06-23-2011, 11:58 PM   #7
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,976
Re: Should I Wash It?

Pictures would help. If the paint is decent but oxidized, I'd hand wash it and buff it up. If it's a multicolored work in progress like mine- well, I still hand wash it, but buffing it wouldn't have much purpose. (That doesn't go for my new rally wheels and trim rings).
truckster is offline   Reply With Quote
Old 06-24-2011, 12:06 AM   #8
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Re: Should I Wash It?

Yeah, the paint is a joke right now. Just thought it might be cool to get the thing running and driving and show it off how I found it then take it home and start peeling back the layers. BTW, the good ol boy tires are coming off first. The West coast mirrors and trailer hitch are already off.
Attached Images
   
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!

Last edited by BMERDOC; 06-24-2011 at 12:08 AM.
BMERDOC is offline   Reply With Quote
Old 06-24-2011, 11:36 AM   #9
Lee H
Registered User
 
Lee H's Avatar
 
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,147
Re: Should I Wash It?

Oh yah, I'd power wash the whole thing.
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner.

1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components.

My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703
Lee H is offline   Reply With Quote
Old 06-24-2011, 12:06 PM   #10
BlackTopMotors
Registered User
 
Join Date: Jul 2010
Location: Valencia, CA
Posts: 364
Re: Should I Wash It?

I prefer to use varying amounts of water based degreaser, a bucket, brushes and a hose. (full strength in a spray bottle for dirtier areas). You may end up keeping those good ole boy tires a day longer
.
.
.

Last edited by BlackTopMotors; 06-24-2011 at 12:06 PM.
BlackTopMotors is offline   Reply With Quote
Old 06-24-2011, 12:13 PM   #11
big_al_71
Registered User
 
big_al_71's Avatar
 
Join Date: Jun 2008
Location: South Florida
Posts: 11,375
Re: Should I Wash It?

I power washed mine the day I brought it to my shop that way I could actually see what I was working with, so to answer your question YES you should
__________________
Get your facts first, and then you can distort them as much as you please!!!!!.



Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild
big_al_71 is offline   Reply With Quote
Old 06-24-2011, 01:50 PM   #12
GASoline71
"I ain't nobody, dork."
 
GASoline71's Avatar
 
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,971
Re: Should I Wash It?

Quote:
Originally Posted by 70cst View Post
Even with a restored truck I will do a hand wash only verses a power wash. JMHO
I agree 100% amigo...

Gary
__________________
'cuz chicks dig scars...

My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread.

The Rebuild of Creeping Death after the wreck

Quote:
Originally Posted by LONGHAIR View Post
I would never rebuild a 305.
Quote:
Originally Posted by prostreetC-10 View Post
I love using vacuum gauges as part of the carb tuning process. I hook the gauge to the inside of my garbage can and leave it there.
Quote:
Originally Posted by Marv D View Post
Remember Murphys 2nd law of mechanical relationships... "OPPOSING COMPONENTS ATTEMPTING TO OCCUPY THE SAME SPACE, AT THE SAME TIME, GENERALLY END UP OCCUPYING ADJOINING SPACE AT THE BOTTOM OF THE OIL PAN"
Quote:
Originally Posted by cableguy0 View Post
Its cheaper to listen to advice given when you ask for help than it is to ignore everyone and wait for carnage.

Last edited by GASoline71; 06-24-2011 at 01:50 PM.
GASoline71 is offline   Reply With Quote
Old 06-24-2011, 05:10 PM   #13
AirSpeed
Registered User
 
AirSpeed's Avatar
 
Join Date: Jul 2007
Location: Fall River California
Posts: 2,026
Re: Should I Wash It?

Quote:
Originally Posted by Frkypunk70 View Post
I personally like it when plants are growing out of the back, and the vents are filled with leaves. Hell, keep the tree branches between the bumpers.
Posted via Mobile Device
Thats funny, my brother in law (ex) bought a 70 k5 and the first spring about 20 pot plants started growing in the back, he let them grow all summer, even adding more dirt to cover the roots. The thing made a perfect greenhouse! It stunk like pot forever. I don't know how he never got pulled over other than the fact it was about 25 years ago and the little town I live in was even smaller.
The PO must have thrown all his seeds in the back.
Posted via Mobile Device
AirSpeed is offline   Reply With Quote
Old 06-24-2011, 08:50 PM   #14
Beat68CST
Registered User
 
Beat68CST's Avatar
 
Join Date: Oct 2010
Location: Buckeye Arizona
Posts: 470
Re: Should I Wash It?

Here's my steps to gettin a new (Old) truck.


1: Pull out of weeds
2: Pressure wash; motor, trans, under the whole thing, front end and rear end housing.
Beat68CST is offline   Reply With Quote
Old 06-25-2011, 12:52 AM   #15
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: Should I Wash It?

I'd wash it and pressure wash the engine bay.
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 06-25-2011, 01:09 AM   #16
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Re: Should I Wash It?

Ok sensin a pattern. I gotta take it to work as soon as I feel like it can travel ten minutes in town. Maybe I'll bust out some cleaners. Two of my trusted co workers, on automotive style and taste, agreed with me: Get that thing running, stoppin and steering-all safely and rock that thing for a minute then clean it top to bottom squeaky like.
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 06-25-2011, 01:12 AM   #17
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: Should I Wash It?

Quote:
Originally Posted by BMERDOC View Post
Ok sensin a pattern. I gotta take it to work as soon as I feel like it can travel ten minutes in town. Maybe I'll bust out some cleaners. Two of my trusted co workers, on automotive style and taste, agreed with me: Get that thing running, stoppin and steering-all safely and rock that thing for a minute then clean it top to bottom squeaky like.
My reasoning behind cleaning now is you might find something while cleaning that you want to fix before driving it.....especially in the engine bay...

And if you're going to degrease/pressure wash the engine bay....I'd rather do that before I started doing a tune up on it. Would hate to burn up a new coil or something with the water....
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 08-11-2011, 06:35 PM   #18
stsalvage
Scrapper 1
 
stsalvage's Avatar
 
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
Re: Should I Wash It?

if the trust has not had a good running for 4-9 years.All the old men i hang around tell me.To drain the oil go buy some delo diesel gas and put the gallon of diesel oil in it loosen all the rocker arms and let it run for 45 mins That will Clean every Pore and every inch of that motor.then drain it and refill it with regular Motor oil and you will have a smooth and clean engine.Diesel fuel will not peal the bearing coating off the bearings so its safe to use.Power washing is the way to clean a engine.Why do you think Semi trucks have it done every time they get ready for a long haul.Just cover the alternator and the carburetor and the HEI unit and make sure the engine is warm before you add the Gunk stuff let it sit on the engine for 5-10 min's then go to town best off to pull your truck on to some ramps so you can wash the under belly of the truck

Its like going out to dinner with a dirty shirt or taking your girl out in a dirty Car or truck Me i rather have it running perfect and knowing that all the stuff is safe to drive.Remember you have to think about others on the road not just your self
stsalvage is offline   Reply With Quote
Old 08-11-2011, 06:44 PM   #19
prostreetC-10
My Carbon Footprint
 
prostreetC-10's Avatar
 
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
Re: Should I Wash It?

lol....I have a 73 farm truck that I have never washed since the day I got it 5 years ago. Usually in the spring the snow running off of it will act as a scrubbing agent. Other than that the only time it gets washed is when a thunder storm rolls through. Granted, I've had the motor and trans out twice so I have VERY familiar with the mechanical side of the truck. She's a tank and I wouldn't trade 'er for anything.
prostreetC-10 is offline   Reply With Quote
Old 08-11-2011, 07:15 PM   #20
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Re: Should I Wash It?

To update: It was washed with a scrub brush and degreaser, every crack and crevice blown out for too long with compressed air the engine degreased and washed twice, almost everything I could hit with window cleaner and a shop rag was rubbed on and all the glass was scrubbed with glass cleaner, a razor blade and 000 steel wool . Tomorrow night may be its first cruise. We'll see!
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 08-11-2011, 09:11 PM   #21
bigsnookmaster
Registered User
 
bigsnookmaster's Avatar
 
Join Date: Jan 2008
Location: St.Petersburg,Fl
Posts: 1,267
Re: Should I Wash It?

Don't forget to Armorall the tires!
bigsnookmaster is offline   Reply With Quote
Old 08-11-2011, 09:13 PM   #22
prostreetC-10
My Carbon Footprint
 
prostreetC-10's Avatar
 
Join Date: Oct 2008
Location: Orygun
Posts: 5,527
Re: Should I Wash It?

Quote:
Originally Posted by BMERDOC View Post
To update: It was washed with a scrub brush and degreaser, every crack and crevice blown out for too long with compressed air the engine degreased and washed twice, almost everything I could hit with window cleaner and a shop rag was rubbed on and all the glass was scrubbed with glass cleaner, a razor blade and 000 steel wool . Tomorrow night may be its first cruise. We'll see!
prostreetC-10 is offline   Reply With Quote
Old 08-11-2011, 09:44 PM   #23
BMERDOC
Registered User
 
BMERDOC's Avatar
 
Join Date: Jun 2011
Location: Richmond,Va
Posts: 2,934
Cool Re: Should I Wash It?

Believe me it looks the same only cleaner!!
__________________
Nick Carter
1967 C10 Short bed Fleetside
Project Cheap Thrills!
2WD C10 Modern/Performance Alignments
Easiest Alignment Ever!
BMERDOC is offline   Reply With Quote
Old 08-11-2011, 10:04 PM   #24
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,267
Re: Should I Wash It?

Quote:
Originally Posted by BMERDOC View Post
Believe me it looks the same only cleaner!!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 08-11-2011, 11:13 PM   #25
stealthy '69
'69 Chevy SWB
 
stealthy '69's Avatar
 
Join Date: Feb 2009
Location: Surprise, Az
Posts: 1,065
Re: Should I Wash It?

Well it's still dirty and greasy if there are no pics!!
__________________
Matt



'69 Chevy SWB Fleet, Primer Black; Project No Name
'06 Chevy Trailblazer, Blueish Silver?; Wifes DD, Sold
'08 Chevy Impala SS, Silver; the new DD, AND IT IS FUN!!!
'99 Dodge Dakota R/T, Intense Blue; DD, Sold


Quote:
Originally Posted by longbed67 View Post
The tig welds are not the prettiest i have seen but they do have good penetration.
Quote:
Originally Posted by oldblue1968chevy View Post
There are two things in life where penetration is really important.....and one of them is welding.
stealthy '69 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com