|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-01-2011, 07:39 PM
|
#1 |
|
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
351 V/6-I found a loose part in the oilpan!
If my pictures show up, maybe someone can tell me what or where this part came from!
    Click for larger image. I pulled the pan the fix a big dent in the bottom and this was in the sludge in the bottom! Sure would like to know what it is! TIA,Mike. |
|
|
|
07-01-2011, 10:59 PM
|
#2 |
|
Registered User
Join Date: Mar 2011
Location: Bandera, Texas
Posts: 251
|
Re: 351 V/6-I found a loose part in the oilpan!
Crazy, but it looks like the tip off of a cutting torch.
Posted via Mobile Device |
|
|
|
|
07-01-2011, 11:03 PM
|
#3 |
|
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
Re: 351 V/6-I found a loose part in the oilpan!
It's solid steel,1" long and 1/4" in diameter.The big end is about 5/16".
I don't know this engine very well and was hoping someone who does could help me figure this out. Thanks,Mike. 
|
|
|
|
|
07-01-2011, 11:16 PM
|
#4 |
|
Senior Member
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
|
Re: 351 V/6-I found a loose part in the oilpan!
Does it hold the dipstick tube in place?
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs. |
|
|
|
|
07-01-2011, 11:29 PM
|
#5 |
|
Registered User
Join Date: Mar 2011
Location: Bandera, Texas
Posts: 251
|
Re: 351 V/6-I found a loose part in the oilpan!
That is just odd. I can't think of what that could be. Is it possible that it is not an engine component?
Posted via Mobile Device |
|
|
|
|
07-02-2011, 05:20 PM
|
#6 |
|
Registered User
Join Date: May 2009
Location: caliente ca.
Posts: 297
|
Re: 351 V/6-I found a loose part in the oilpan!
I would try the 6066 GMC message bourd and see if any one there knows.
|
|
|
|
|
07-02-2011, 05:47 PM
|
#7 |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: 351 V/6-I found a loose part in the oilpan!
well it doesn't look like it is a piston or camshaft and of course the pictures are not that great. motor still turns over I take it
ron |
|
|
|
|
07-02-2011, 09:27 PM
|
#8 |
|
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
Re: 351 V/6-I found a loose part in the oilpan!
Thanks guys.
I am trying Jolley's site-Still waiting for answers. I ran it 2 weeks ago. I have it apart for painting.I took the oil pan off to fix some dents when I found the part. It may be part of one of the in head pcvs.Not sure though. Mike.
|
|
|
|
|
07-02-2011, 10:15 PM
|
#9 |
|
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
Re: 351 V/6-I found a loose part in the oilpan!
O.K.,it is part of the in-head pcv.
With the help of a fellow named Lewis on Jolley's site,it's been determined that it fell apart at some time and was replaced with an"AC" replacement. Someone just never bothered to pull the pan and remove the old part! Same part used on all GMC,V/6's,so if you have one,check them once in a while.I was told they are prone to come apart. Thanks for all the suggestions and help! Mike.
|
|
|
|
|
07-03-2011, 12:38 AM
|
#10 |
|
Registered User
Join Date: Mar 2011
Location: Bandera, Texas
Posts: 251
|
Re: 351 V/6-I found a loose part in the oilpan!
LOL, good info!
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
