TN Garage Cleaning - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoNeck · 07-04-2011, 02:19 PM

I have a few left over things that I found while cleaning out my garage today. Here is a list of everything pictured and a price:

1. '68 Headlight Bucket - Media Blasted and Painted SOLD

2. '68 Headlight Bucket - Media Blasted and Painted. Has been modifed by PO to fit '72 SOLD

3. Rochester 2G Carb - Removed from a 1969 Camaro, NEEDS REBUILT SOLD

4. Small Block Alternator Bracket (Passenger Side) $10 + shipping

5. '69 C-10 Battery Side Panels (No Bottom). Minor pitting near the bottom. $20 + shipping

6. New SSBC Front Disc Brake Pads, PWR 1015 SOLD

7. Small Block Choke Stoves/Pulloffs (One Complete, one just the cover) $10 + shipping

8. New DJM Lowering Shocks. I had them on a Ranger Pickup. Not sure what else they fit. Part #DJM1900 and Part #DJM2100. Cost $104, $50 + shipping.

9. Carb Adapter. Converts Square Bore to Spread Bore or Vise Versa. $10.00 + shipping.

10. '68 Painted Headlight Bezel, Passenger Side. SOLD

11. Air Conditioner Canister clamps. $5 for both + shipping.

Thanks for looking!

Wayne (NoNeck)

Fesser · 07-04-2011, 03:10 PM

If the carb hasn't been exposed to rain or floods, I'll take it. I've had bad luck with carbs that got filled with water. Frank

PT'S 70 CST · 07-04-2011, 04:01 PM

I do not understand how you came up with the shock combo and had them on a ranger but here is the correct application for the two.
http://www.gcustoms.com/calmax-super...15fc34a5854d15

http://www.gcustoms.com/calmax-super...8473f524846d19

PT

NoNeck · 07-04-2011, 04:29 PM

Frank -

The carb has not been in the rain or flood. It has been sitting on a shelf in my garage for about 2 years, so it is showing a little oxidation. The carb had just been rebuilt by PO, but gas would seep from it while the engine was running. That's why I indicated that it needs a rebuild. It might only need a new needle and seat(?) Otherwise it is very clean.

Let me know if you want it.

Thanks,

Wayne (NoNeck)

NoNeck · 07-04-2011, 04:36 PM

PT -

Thanks for the info!

I always thought this was a strange combination of shocks for my 2008 Ranger, too. They were cataloged for the rear of my truck. The one for the Passenger Side needed to be 21" long (DJM2100) because of the way the shock attached to the frame(?). Supposedly it needed a longer shock on that side... even though the factory original shocks that I removed were the exact same length. The Driver Side shock was 19" long (DJM1900).

Basically, I changed them to Monroes for a softer ride.

Wayne (NoNeck)

PT'S 70 CST · 07-04-2011, 05:04 PM

No problem, the good thing is the 2100 is the correct application for a 68-87.

PT

**Todd68Chevy** · 07-04-2011, 05:53 PM

I will take #10 pending condition and shipping quote. Does the bezel have any dents or issues? Price shipping to a business address zip code 47882. Do you take PayPal? Thanks, Todd

Fesser · 07-05-2011, 09:49 AM

Quote:

Originally Posted by NoNeck

Frank -

The carb has not been in the rain or flood. It has been sitting on a shelf in my garage for about 2 years, so it is showing a little oxidation. The carb had just been rebuilt by PO, but gas would seep from it while the engine was running. That's why I indicated that it needs a rebuild. It might only need a new needle and seat(?) Otherwise it is very clean.

Let me know if you want it.

Thanks,

Wayne (NoNeck)

I'll take it. Shipping will be to 94559. Let me know how much and how to pay. Frank

P.S. If you could let me know what numbers are on the carb it would help me get a kit for it before it gets here. Parts store doesn't care what it came off of. They just want numbers.

NoNeck · 07-06-2011, 08:49 AM

Fesser -

I have sent you a Private Message. As promised, here is a photo of the numbers I found on the carb body.

Please PM your shipping address.

Thank you, sir.

Wayne (NoNeck)

NoNeck · 07-06-2011, 09:04 AM

Quote:

Originally Posted by Todd68Chevy

I will take #10 pending condition and shipping quote. Does the bezel have any dents or issues? Price shipping to a business address zip code 47882. Do you take PayPal? Thanks, Todd

Todd -

The bezel has very minor surface scratches and a small dent as shown circled in the photo below. I have included a photo of the back, also.

I have sent you a PM with PayPal and shipping quote.

Thanks,

Wayne (NoNeck)

**Todd68Chevy** · 07-06-2011, 12:32 PM

Quote:

Originally Posted by NoNeck

Todd -

The bezel has very minor surface scratches and a small dent as shown circled in the photo below. I have included a photo of the back, also.

I have sent you a PM with PayPal and shipping quote.

Thanks,

Wayne (NoNeck)

PM and Payment sent. Thanks, Todd

NoNeck · 07-06-2011, 02:22 PM

Headlight bezel (#10) SOLD to Todd68Chevy.

I will box up tonight and get it out to you first thing tomorrow. I will PM the tracking number to you.

Thanks Todd.

Wayne (NoNeck)

NoNeck · 07-06-2011, 05:11 PM

Rochester Carb SOLD pending payment to Fesser.

Thanks Frank!

Wayne (NoNeck)

NoNeck · 07-06-2011, 06:57 PM

Frank, payment received. I will mail out first thing tomorrow morning and PM your tracking number.

Thanks again.

Wayne (NoNeck)

NoNeck · 07-07-2011, 12:08 PM

Todd - I have sent you a PM with your tracking number.

Thanks, Wayne

NoNeck · 07-07-2011, 12:08 PM

Frank - I have sent you a PM with tracking number.

Thanks, Wayne

CC69Rat · 07-07-2011, 10:17 PM

Bump for my Pop on the other stuff.

**Todd68Chevy** · 07-12-2011, 08:56 PM

Got the bezel yesterday. Thanks, Todd

NoNeck · 07-13-2011, 02:11 PM

Todd - Glad you got it.

NoNeck

Hargy69 · 07-14-2011, 10:14 AM

Will the modified headlight bucket still fit on a 68?

NoNeck · 07-15-2011, 09:43 AM

Hi Chris -

Sorry, I sold both headlight buckets locally yesterday. Thanks for asking.

Wayne (NoNeck)

07-04-2011, 03:10 PM	#2
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Garage Cleaning If the carb hasn't been exposed to rain or floods, I'll take it. I've had bad luck with carbs that got filled with water. Frank

07-04-2011, 04:01 PM	#3
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Garage Cleaning I do not understand how you came up with the shock combo and had them on a ranger but here is the correct application for the two. http://www.gcustoms.com/calmax-super...15fc34a5854d15 http://www.gcustoms.com/calmax-super...8473f524846d19 PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-04-2011, 04:29 PM	#4
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Frank - The carb has not been in the rain or flood. It has been sitting on a shelf in my garage for about 2 years, so it is showing a little oxidation. The carb had just been rebuilt by PO, but gas would seep from it while the engine was running. That's why I indicated that it needs a rebuild. It might only need a new needle and seat(?) Otherwise it is very clean. Let me know if you want it. Thanks, Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-04-2011, 04:36 PM	#5
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning PT - Thanks for the info! I always thought this was a strange combination of shocks for my 2008 Ranger, too. They were cataloged for the rear of my truck. The one for the Passenger Side needed to be 21" long (DJM2100) because of the way the shock attached to the frame(?). Supposedly it needed a longer shock on that side... even though the factory original shocks that I removed were the exact same length. The Driver Side shock was 19" long (DJM1900). Basically, I changed them to Monroes for a softer ride. Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-04-2011, 05:04 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Garage Cleaning No problem, the good thing is the 2100 is the correct application for a 68-87. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

07-04-2011, 02:19 PM	#1
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Garage Cleaning I have a few left over things that I found while cleaning out my garage today. Here is a list of everything pictured and a price: 1. '68 Headlight Bucket - Media Blasted and Painted SOLD 2. '68 Headlight Bucket - Media Blasted and Painted. Has been modifed by PO to fit '72 SOLD 3. Rochester 2G Carb - Removed from a 1969 Camaro, NEEDS REBUILT SOLD 4. Small Block Alternator Bracket (Passenger Side) $10 + shipping 5. '69 C-10 Battery Side Panels (No Bottom). Minor pitting near the bottom. $20 + shipping 6. New SSBC Front Disc Brake Pads, PWR 1015 SOLD 7. Small Block Choke Stoves/Pulloffs (One Complete, one just the cover) $10 + shipping 8. New DJM Lowering Shocks. I had them on a Ranger Pickup. Not sure what else they fit. Part #DJM1900 and Part #DJM2100. Cost $104, $50 + shipping. 9. Carb Adapter. Converts Square Bore to Spread Bore or Vise Versa. $10.00 + shipping. 10. '68 Painted Headlight Bezel, Passenger Side. SOLD 11. Air Conditioner Canister clamps. $5 for both + shipping. Thanks for looking! Wayne (NoNeck) Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND. Last edited by NoNeck; 07-15-2011 at 09:44 AM.

07-04-2011, 05:53 PM	#7
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Garage Cleaning I will take #10 pending condition and shipping quote. Does the bezel have any dents or issues? Price shipping to a business address zip code 47882. Do you take PayPal? Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 07-04-2011 at 06:57 PM. Reason: Changed interest

07-06-2011, 08:49 AM	#9
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Fesser - I have sent you a Private Message. As promised, here is a photo of the numbers I found on the carb body. Please PM your shipping address. Thank you, sir. Wayne (NoNeck) Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-06-2011, 02:22 PM	#12
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Headlight bezel (#10) SOLD to Todd68Chevy. I will box up tonight and get it out to you first thing tomorrow. I will PM the tracking number to you. Thanks Todd. Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-06-2011, 05:11 PM	#13
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Rochester Carb SOLD pending payment to Fesser. Thanks Frank! Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-06-2011, 06:57 PM	#14
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Frank, payment received. I will mail out first thing tomorrow morning and PM your tracking number. Thanks again. Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-07-2011, 12:08 PM	#15
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Todd - I have sent you a PM with your tracking number. Thanks, Wayne __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-07-2011, 12:08 PM	#16
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Frank - I have sent you a PM with tracking number. Thanks, Wayne __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-07-2011, 10:17 PM	#17
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,208	Re: Garage Cleaning Bump for my Pop on the other stuff. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

07-12-2011, 08:56 PM	#18
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: Garage Cleaning Got the bezel yesterday. Thanks, Todd __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.



Register or Log In To remove these advertisements.

07-13-2011, 02:11 PM	#19
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Todd - Glad you got it. NoNeck __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

07-14-2011, 10:14 AM	#20
Hargy69 Registered User Join Date: Sep 2010 Location: Waterloo, IL Posts: 19	Re: Garage Cleaning Will the modified headlight bucket still fit on a 68?

07-15-2011, 09:43 AM	#21
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Garage Cleaning Hi Chris - Sorry, I sold both headlight buckets locally yesterday. Thanks for asking. Wayne (NoNeck) __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.