Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-25-2011, 10:32 PM | #1 |
Registered User
Join Date: Dec 2010
Location: konawa ok/oakdale Ca.
Posts: 1,651
|
? about napa wheel bearing seal and carb?
I bought some wheel bearing seals from napa and it looks more like an oil seal it even says oil seal on the box.I checked the part number online and it said it was the rite part!Any body else have this problem?Is brown wheel bearing grease ok i have always used the red?THere is a pin in the front of my carb that wont go up or down should i try working it with a pair of pliers?Im pointing at it with a screw driver.I would like to go with the origanal fuel line and filter for safety reasons.Who makes the best fuel line?This is a 72 chevy half ton with a 4barrel 350.I got the carb at autozone a few years ago i think it is the stock quadrajet.Thanks guys.
|
07-25-2011, 10:40 PM | #2 |
Registered User
Join Date: Dec 2010
Location: konawa ok/oakdale Ca.
Posts: 1,651
|
Re: ? about napa wheel bearing seal and carb?
|
07-25-2011, 10:48 PM | #3 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,477
|
Re: ? about napa wheel bearing seal and carb?
-
That is the accelerator pump rod. You should be having trouble starting it when it's cold.... Yes, it should go up and down. Looks like it is stuck down, it should be up against the lever. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
07-25-2011, 10:59 PM | #4 |
Registered User
Join Date: Dec 2010
Location: konawa ok/oakdale Ca.
Posts: 1,651
|
Re: ? about napa wheel bearing seal and carb?
|
07-25-2011, 11:01 PM | #5 |
Registered User
Join Date: Dec 2010
Location: konawa ok/oakdale Ca.
Posts: 1,651
|
Re: ? about napa wheel bearing seal and carb?
Thanks locdoc.What would be the best way of breaking it loose should i spray some wd40 on it?
|
07-25-2011, 11:23 PM | #6 |
Senior Member
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,901
|
Re: ? about napa wheel bearing seal and carb?
Wheel bearing seals and the oil seal on the front of your timing cover look very similar; that's because they're made the same way, since they both seal rotating parts.
If your accelerator pump is stuck, it's probably time for a carb rebuild. You could try spraying some carb cleaner on it, but the cup is probably worn out. I'll bet it really bogs on you when you accelerate hard. |
07-25-2011, 11:54 PM | #7 | |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,477
|
Re: ? about napa wheel bearing seal and carb?
Quote:
Not WD-40, maybe some PB Blaster or Liquid Wrench. Or like truckster said try some carb cleaner on it. There is a spring inside that is supposed to push it up. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|