![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2009
Location: Ottawa, Ontario, Canada
Posts: 27
|
false door window track removal?
hey all, I am stripping my burb down and just ha ve to remove the fasle door window track and stationary glass. Prob is, i cannot seem to get it out. i have tried everything I can without damaging the piece. If anyone has a good tip, it would be appreciated as this is the last thing i have to remove before lifting the tub off the frame.
thanks Jeff |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Apr 2006
Location: Anaheim, CA
Posts: 304
|
Re: false door window track removal?
The track is held in with 2 screws at the bottom and one screw at the top going thru the header. With those out, the track should come out.
The stationary window can be a real tight fit . I just cut away at the weatherstripping with a razor knife to free it up, and eventually got it out along with the weatherstripping. Good luck |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: Ottawa, Ontario, Canada
Posts: 27
|
Re: false door window track removal?
hey, ya, i cant find the top screw. looks like there is a molding that goes from the top of the window track, across to the front of the door and back down. i took the screws out all along this molding, but cannot for the life of me get it out. is the top screw behind this molding?
|
![]() |
![]() |
![]() |
#4 |
Junk Yartist
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
|
Re: false door window track removal?
Do you have the front window track removed too? Once that is removed then the "molding" should come out easier and then you can get to the screw up in the top to remove the rear window track. I had to use HOT, soapy water to free the fixed window. I still chipped my glass
__________________
-Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2009
Location: Ottawa, Ontario, Canada
Posts: 27
|
Re: false door window track removal?
ya, i have the front track out. and have tried to get this molding out for a few hours. of course i am being extremely careful, cause im sure this piece would be hard to find. i guess i will just have to try for a little longer!!
thanks |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|