![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Dumb question of the month
Can I remove my tie-rod adjustment sleeves with removing my outer tie-rod ends? I thought if I loosened then turned them one direction enough a side could come off then I could turn it the other way and get it all the way off. Is this possible?
Thx |
![]() |
![]() |
![]() |
#2 | |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: Dumb question of the month
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2011
Location: S.L.C.
Posts: 227
|
Re: Dumb question of the month
i wish i had read this 8 min ago.........(12:07 am now) i could have said ... i learned something today but to late
__________________
Im stright up ESL student........ ![]() 94 s10 4x4 4.3/5speed (dd) 68 lwb GMC 350/4speed 52 5 window GMC I6/4speed 12v (8lugs and long bed) 53 bel air 235 I6/powerglide |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: Dumb question of the month
Lol - well my outer tie rod ends are new but the old were a b*tch to get off. The new ones would not be too bad I would think but my adjustment sleeves turn pretty easy which is why I want new ones. That is after putting grade 8 bolts and nuts on them, you can still turn one by hand so....
|
![]() |
![]() |
![]() |
#5 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Dumb question of the month
may be able to take the tie rod out of the sleeve get the clamping part of the sleeve red hot then cool it. To shrink the metal. It will either work or be brittle and break.....
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2010
Location: Boise, ID
Posts: 1,280
|
Re: Dumb question of the month
Thanks I may try that.
|
![]() |
![]() |
![]() |
#7 | |
just can't cover up my redneck
Join Date: May 2004
Location: Columbus OH
Posts: 11,414
|
Re: Dumb question of the month
Do you have the clamps lined up correctly? The bolt/nut of the clamp is supposed to be aligned with the slot of the adjuster sleeve. It is intended to squeeze the slot against the tie-rod's threads. I have seen a lot of them with the clamp 90 degrees to the slot, it doesn't tighten very well.
__________________
You can review the site's rules here. Quote:
Bad planning on your part does not necessarily constitute an instant emergency on my part.... The great thing about being a pessimist is that you are either pleasantly surprised or right. ![]() |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2002
Location: Manitoba, Canada
Posts: 663
|
Re: Dumb question of the month
Not too difficult to remove the tie rods and do it in a vice on the workbench. I'd recommend this rather than messing with trying to turn the adjuster all the way. Besides, doing it on the bench allows you to be more careful about marking original positions so that alignment is easier later on.
__________________
Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|