64-66 custom deluxe windshield trim - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dodgiesdad · 08-13-2011, 10:38 AM

While on vacation, I picked up deluxe windshield trim for my truck. I cut it out of a truck in a junkyard myself. Question is there were only 3 clips to join the pieces. One on each side and one on the bottom. There was no clip on the top. The top was butted together. Did I get everything or am I missing a fourth clip? This was the first and only truck I have seen in a yard with this trim so I am not sure whats right.

fchava · 08-13-2011, 11:18 AM

My truck has clips on all 4 joints. So i guess you are missing one

dodgiesdad · 08-13-2011, 11:43 AM

That is what I expected. Thanks. Now for the next question. Where can I get the clips? Can I use ones from something else? Are the clips available aftermarket?

**aerotruk63** · 08-13-2011, 12:42 PM

I believe the clips share the same part # with earlier years, pre 64 I mean. Alot of the clips go missing once they're off the truck.

iehotrod · 08-13-2011, 02:00 PM

who sells those clips?

08-13-2011, 10:38 AM	#1
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	64-66 custom deluxe windshield trim While on vacation, I picked up deluxe windshield trim for my truck. I cut it out of a truck in a junkyard myself. Question is there were only 3 clips to join the pieces. One on each side and one on the bottom. There was no clip on the top. The top was butted together. Did I get everything or am I missing a fourth clip? This was the first and only truck I have seen in a yard with this trim so I am not sure whats right.

08-13-2011, 11:18 AM	#2
fchava Registered User Join Date: Mar 2005 Location: foresthill ca Posts: 144	Re: 64-66 custom deluxe windshield trim My truck has clips on all 4 joints. So i guess you are missing one __________________ http://www.picturetrail.com/fregon

08-13-2011, 11:43 AM	#3
dodgiesdad Registered User Join Date: Nov 2010 Location: Indiana, PA Posts: 220	Re: 64-66 custom deluxe windshield trim That is what I expected. Thanks. Now for the next question. Where can I get the clips? Can I use ones from something else? Are the clips available aftermarket?

08-13-2011, 12:42 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64-66 custom deluxe windshield trim I believe the clips share the same part # with earlier years, pre 64 I mean. Alot of the clips go missing once they're off the truck. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-13-2011, 02:00 PM	#5
iehotrod Registered User Join Date: Dec 2008 Location: Oak Hills, California Posts: 393	Re: 64-66 custom deluxe windshield trim who sells those clips?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.