MI WTB 1970 K20 4x4 parts

[cheyenne402]

I need the following:

1. Shift linkage from column to transmission with brackets for automatic.

2. Transfer case brace that goes from case to frame.



Thanks in advance. I will update this list as the build goes on.

[t korinek]

I have the 205 transfer case bracket, L shaped that connects t case to frame $22 shipped.
The only 4x4 auto linkage I have is the part that bolts to the frame

Let me know if you need any of this
Thanks,
Tom

[cheyenne402]

Originally Posted by t korinek

I have the 205 transfer case bracket, L shaped that connects t case to frame $22 shipped.
The only 4x4 auto linkage I have is the part that bolts to the frame

Let me know if you need any of this
Thanks,
Tom

isn't the bracket a two piece bracket?

[cheyenne402]

This is the linkage I need.

[ETsC10]

I have the linkage for you.
The photo was taken before the other two parts
were cleaned and painted but they will be included.

Every thing's clean and complete.
Asking $55 shipped.

[cheyenne402]

Originally Posted by ETsC10

I have the linkage for you.
The photo was taken before the other two parts
were cleaned and painted but they will be included.

Every thing's clean and complete.
Asking $55 shipped.

I will take them. PM me your payment info.

[ETsC10]

Originally Posted by cheyenne402

I will take them. PM me your payment info.

PM sent

[t korinek]

Heres pics of the 3 pieces for the transfer case , the flat piece has a little wear on the pop out's, but can be filed flat, its the best one I have. $35 shipped for all 3 pieces

[cheyenne402]

t korinek, let me check with my brother and see if he that is acceptable. He also need a dipstick & tube for automatic transmission for the 4x4 K20 with air.

Thanks.

[cheyenne402]

Originally Posted by t korinek

Heres pics of the 3 pieces for the transfer case , the flat piece has a little wear on the pop out's, but can be filed flat, its the best one I have. $35 shipped for all 3 pieces

I will take the bracket, I need both dipticks and tubes also for 1970 K20 with air (not sure if that makes a difference) if you have any.

[cheyenne402]

We need nice 4x4 exhaust manifolds, both dipsticks with tubes, spark plug retainers that bolt to intake manifold

[cheyenne402]

ttt

[ETsC10]

Cheyenne, I've been able to round up the manifolds (nice), trany and
engine oil tubes (plus dipsticks) and the looms.
Also, the correct trany hump you were looking for in another thread.

Let me know if you need pics & details.

ET

[cheyenne402]

Originally Posted by ETsC10

Cheyenne, I've been able to round up the manifolds (nice), trany and
engine oil tubes (plus dipsticks) and the looms.
Also, the correct trany hump you were looking for in another thread.

Let me know if you need pics & details.

ET

The hump has to be correct for a 1970 4x4. Are the other things for a 4x4?
PM me with price also. Thanks!

[cheyenne402]

Originally Posted by ETsC10

Cheyenne, I've been able to round up the manifolds (nice), trany and
engine oil tubes (plus dipsticks) and the looms.
Also, the correct trany hump you were looking for in another thread.

Let me know if you need pics & details.

ET

Pics would be great.

[ETsC10]

Trany tunnel is from a 1970 Blazer...note two light creases (marked).
I haven't dug out the looms yet but they are cleaned, painted and correct.
Manifolds are not cracked and threads on studs still usable.
PM sent on details.

[ETsC10]

cheyenne402, here's pics of the looms. As I said in my PM, the finish isn't what I'd like so I'll be
roughing them up and re-coating...any color you wish.

There was zero rust on them and were in stock paint and grime when I pulled them from my parts truck.
They will come with the stock bolts so you can replicate them for your build, if need be.
I can also send the stock, gray points-style loom ends if they will work for you.

[sboris]

Hey Cheyenne402, I got a guy in Marshalltown Iowa that has alot of
4x4 stuff I buy from. He advertises on C L and I know he just parted a
70 4x4 and I can pm you the number if it would help at all.

[cheyenne402]

Originally Posted by ETsC10

cheyenne402, here's pics of the looms. As I said in my PM, the finish isn't what I'd like so I'll be
roughing them up and re-coating...any color you wish.

There was zero rust on them and were in stock paint and grime when I pulled them from my parts truck.
They will come with the stock bolts so you can replicate them for your build, if need be.
I can also send the stock, gray points-style loom ends if they will work for you.

Thanks for pictures, looking at them--we have those, so pass on the looms for now. Still checking on tranny dipstick tube situation to make sure its correct. Everything else looks correct so far.

[ETsC10]

Originally Posted by cheyenne402

Thanks for pictures, looking at them--we have those, so pass on the looms for now. Still checking on tranny dipstick tube situation to make sure its correct. Everything else looks correct so far.

That's cool. If you need pics or measurements, let me know.

E

[69CST-V]

How much for the Hi Hump Cover?

[cheyenne402]

Originally Posted by 69CST-V

How much for the Hi Hump Cover?

I believe I have dibs, sir

We are working on a package deal--thanks

[cheyenne402]

Originally Posted by 69CST-V

How much for the Hi Hump Cover?

I have a very nice 4 speed hump for sale if you need one. It's posted in the classifieds

[cheyenne402]

Originally Posted by sboris

Hey Cheyenne402, I got a guy in Marshalltown Iowa that has alot of
4x4 stuff I buy from. He advertises on C L and I know he just parted a
70 4x4 and I can pm you the number if it would help at all.

That would be great, thanks. I am sure there will be more we need.

[69CST-V]

Wasn't trying to steel it. Was just trying to get prices to compare.

I looked at yours but I don't want to do the compound angles on the filler hole patch.

Thanks