![]() |
![]() |
#1 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
What yoke for a 700R4
My truck has had a 700R in it for almost 10 years.
The problem is that my yoke has become grooved, enough so that even a new seal didn't take care of it... and I have no idea what the yoke is from... I remember that my old 3spd manual yoke didn't work so I scrounged through a giant pile at a junkyard until I found one that would work with my shortened 67 driveshaft and I'm 99% sure 30 spline shaft 700R. I don't want to sleeve it... so what works? Would an automatic 67-72 truck shaft work? I think my yoke came from an 80's caprice, but I don't remember ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: What yoke for a 700R4
same yoke as TH350 and powerglide// should b about million of them in the junkyard
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2011
Location: Chattanooga, TN
Posts: 2,151
|
Re: What yoke for a 700R4
Yep-same yoke as TH350, Powerglide, TH200, TH200R4, TH700R4, 4L60, 4L60E, and Muncie 4-sp and most 3-sp manuals. What won't fit is TH400 or B/W car 4-sp. Not sure about HD granny gear 4-sp or TH375.
__________________
'83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project |
![]() |
![]() |
![]() |
#4 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: What yoke for a 700R4
Great thanks guys!! What if I pull it and it's the 27 spline shaft... out of curiosity...
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#5 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: What yoke for a 700R4
new trans yoke = time for a trip to the driveline shop for a ballance. They would also have whatever trans yoke you'd need and probably a new ujoint also.
|
![]() |
![]() |
![]() |
#6 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: What yoke for a 700R4
Yeah, I planned on new U joints, but the balance is a good idea. It was balanced when I had it shortened (like 10 years ago), maybe it's gotten out of whack?
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2010
Location: Albuquerque, NM
Posts: 21
|
Re: What yoke for a 700R4
Hi,
Call these guys if you want a new one. They'll hook you up: https://www.drivetrainamerica.com/default.aspx If your seal gets old enough it will become hard and groove your seal surface. Nasty leaks after that, I hate it. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Apr 2000
Location: Bonne Terre, Mo
Posts: 3,005
|
Re: What yoke for a 700R4
Years ago I pulled the 3 spd installed the granny low top loader 4 spd the DS had to be swapped so your guess was correct.
__________________
'69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" |
![]() |
![]() |
![]() |
#9 |
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: What yoke for a 700R4
even if it was ballanced 10 min ago, if you're swapping parts you're changing the ballance.
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|