|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-22-2011, 09:14 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: Overland Park, KS
Posts: 70
|
C20 Tubular Control Arm Install Problem
Need some help from you guys... I am in the process of installing a set of tubular control arms for a c10. The problem is the lower control arm shaft mounts as a plate and the new shafts mount using U-bolts. Does anyone have measurements or know which hole to utilize and which one needs re-drilled to mount these?
|
|
|
|
09-22-2011, 11:36 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: C20 Tubular Control Arm Install Problem
I don't happen to have the measurements you are looking for. I could probably get you some tomorrow. Keep in mind that you will also need to install the saddles that the lower control arm shafts rest in. It might be just as easy to switch the crossmember for a C10 unit, or a '67 and up C20 unit
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
