A door repair video for cool truck folks........... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ebfabman · 10-01-2011, 11:14 AM

enjoy.....just don't hurt yourself.....

door repair.wmv - YouTube

greystoke · 10-01-2011, 11:46 AM

it would be better to see it in portions at normal speed...maybe not all the cutting but some of the finish stuff. It looks fantastic.

ebfabman · 10-01-2011, 12:25 PM

What do you mean.....it is at normal speed.....

scooterskoolkustoms · 10-01-2011, 12:30 PM

Quote:

Originally Posted by ebfabman

What do you mean.....it is at normal speed.....

LOL I hope he gets paid per door and not hourly .

bcutt · 10-01-2011, 01:44 PM

Cool video! Had to do the same thing to both my doors. Only thing I did different was use some weld through primer on the door skin to door shell mating surfaces and rust treated the inside shell. Also used it as a chance to put some sound deadener where I couldn't reach otherwise.

Ryan5O · 10-01-2011, 01:51 PM

Nice. I bet thats not the first time he's done that. It would probably take me a week to do the same thing...

BMERDOC · 10-01-2011, 02:04 PM

Yeah, It woulda been nice if they slowed it down to explain some of the work. I hope he treated that rust before he buttoned it up. I wonder whats the price difference between buying new and refurbing the old one?

gcburdic · 10-01-2011, 05:07 PM

dang Earl...you work fast!!!

so will this be on the upcoming videos???

hugger6933 · 10-01-2011, 08:57 PM

Around the part were the latch goes there looked to be some sort of a support there, my screw holes in three or four of my doors are cracked or worse. Does anyone know if that part is availble aftermarket? Was there a problem that the general addressed by a service bulliten or recall concerning that area? Anyone else know what I'm talking about?

Warrens69GMC · 10-01-2011, 09:18 PM

nice!!

ebfabman · 10-03-2011, 01:21 PM

Thanks! Hey Geoff, yes I plan on some more videos. They will be quickies till they get edited. Getting ready to post a lower front bedside replacement so stay tuned. This one should be pretty cool because it will show some welding and grinding. I think. Anyway, keep checkin.

greystoke · 10-03-2011, 07:42 PM

that would be great earl, not blowing smoke anywhere but I've never seen anyone better at this type of metal repair. Learning from you would be an honor for any of us.

POPO1984 · 10-03-2011, 07:45 PM

Dude i wish you lived in Houston

ebfabman · 10-09-2011, 10:21 PM

Here is a front lower bedside replacement on a blazer

bedside - YouTube

Warrens69GMC · 10-10-2011, 01:07 AM

Very nice!!

greystoke · 10-10-2011, 06:56 PM

Earl...what do we have to do to see this work at normal speed?

ebfabman · 10-10-2011, 07:35 PM

I think you would get bored. It took over five hours to do the bedside. The aftermarket panel, as it was stamped, wasn't close enough. It had to be flattened out and the character line redefined so the wheel opening flow would be correct. Then the door opening side also had to be straightened and the whole panel planished to contour before mock up.

faribran · 10-10-2011, 07:53 PM

Earl, thanks for sharing

**twotrucks** · 10-10-2011, 09:02 PM

Awesome work! Thanks for sharing; I wish I had some of that talent.

10-01-2011, 11:46 AM	#2
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: A door repair video for cool truck folks........... it would be better to see it in portions at normal speed...maybe not all the cutting but some of the finish stuff. It looks fantastic. __________________ "Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629

10-01-2011, 12:25 PM	#3
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: A door repair video for cool truck folks........... What do you mean.....it is at normal speed.....

10-01-2011, 01:44 PM	#5
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: A door repair video for cool truck folks........... Cool video! Had to do the same thing to both my doors. Only thing I did different was use some weld through primer on the door skin to door shell mating surfaces and rust treated the inside shell. Also used it as a chance to put some sound deadener where I couldn't reach otherwise. __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

10-01-2011, 01:51 PM	#6
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: A door repair video for cool truck folks........... Nice. I bet thats not the first time he's done that. It would probably take me a week to do the same thing... __________________ USCG "Support Search & Rescue, Get Lost"

10-01-2011, 02:04 PM	#7
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: A door repair video for cool truck folks........... Yeah, It woulda been nice if they slowed it down to explain some of the work. I hope he treated that rust before he buttoned it up. I wonder whats the price difference between buying new and refurbing the old one? __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

10-01-2011, 05:07 PM	#8
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: A door repair video for cool truck folks........... dang Earl...you work fast!!! so will this be on the upcoming videos??? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

10-01-2011, 08:57 PM	#9
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,262	Re: A door repair video for cool truck folks........... Around the part were the latch goes there looked to be some sort of a support there, my screw holes in three or four of my doors are cracked or worse. Does anyone know if that part is availble aftermarket? Was there a problem that the general addressed by a service bulliten or recall concerning that area? Anyone else know what I'm talking about? Attached Images

10-01-2011, 09:18 PM	#10
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: A door repair video for cool truck folks........... nice!!

10-03-2011, 01:21 PM	#11
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: A door repair video for cool truck folks........... Thanks! Hey Geoff, yes I plan on some more videos. They will be quickies till they get edited. Getting ready to post a lower front bedside replacement so stay tuned. This one should be pretty cool because it will show some welding and grinding. I think. Anyway, keep checkin.

10-03-2011, 07:42 PM	#12
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: A door repair video for cool truck folks........... that would be great earl, not blowing smoke anywhere but I've never seen anyone better at this type of metal repair. Learning from you would be an honor for any of us. __________________ "Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629

10-03-2011, 07:45 PM	#13
POPO1984 Registered User Join Date: Jul 2009 Location: Houston, Tx Posts: 1,133	Re: A door repair video for cool truck folks........... Dude i wish you lived in Houston __________________ 1972 SWB Medium Olive South Houston Instagram: Antbish84

10-10-2011, 01:07 AM	#15
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,613	Re: A door repair video for cool truck folks........... Very nice!!

10-10-2011, 06:56 PM	#16
greystoke Registered User Join Date: Jul 2008 Location: Buckeye, Arizona Posts: 694	Re: A door repair video for cool truck folks........... Earl...what do we have to do to see this work at normal speed? __________________ "Fear makes the wolf look bigger" http://67-72chevytrucks.com/vboard/s...d.php?t=305629

10-10-2011, 07:35 PM	#17
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: A door repair video for cool truck folks........... I think you would get bored. It took over five hours to do the bedside. The aftermarket panel, as it was stamped, wasn't close enough. It had to be flattened out and the character line redefined so the wheel opening flow would be correct. Then the door opening side also had to be straightened and the whole panel planished to contour before mock up.

10-10-2011, 07:53 PM	#18
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: A door repair video for cool truck folks........... Earl, thanks for sharing __________________ "



Register or Log In To remove these advertisements.

10-10-2011, 09:02 PM	#19
twotrucks Junior Member Join Date: Jun 2003 Location: Louisville,Ky Posts: 383	Re: A door repair video for cool truck folks........... Awesome work! Thanks for sharing; I wish I had some of that talent.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.