what did you get done 10/02/2011 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 10-02-2011, 05:03 PM

I didnt get anything done due to weather issues here but i have the parts to swap in the tilt column if all goes well and add my new wheel.. i have the new seat and will try to upholster that tomorrow ..
I did do something today tho not truck related which im kinda proud of .. I qualified with the shotgun for a hunting license and bought myself a compound bow to try the archery one next
How about you all?

notyo_cheez · 10-02-2011, 05:15 PM

Chores and stuff this weekend, last weekend repaired kitchen cabinets. Haven't picked on the project in awhile, last thing I did was start stripping out the wiring harness in the engine compartment. Been slow going due to 100 F in the shade down here...

gofastbobby · 10-02-2011, 07:56 PM

Quote:

Originally Posted by old Rusty C10

How about you all?

I watched my Tigers take down your Yankees.

On a side note, Saturday I picked up a set of old 15x8 cragars with knock off caps wrapped in 275/60-15 radial t/a's. Got 'em mounted up and spent the rest of the weekend cruisin'.

Gonna drive the truck all week. next weekend i'll put an advance kit in the distributor and get a good tune on it. I am working a trade on a holleyHP dual feed with mechanical secondaries, maybe I'll get that on and running soon.
Posted via Mobile Device

S10Fan · 10-02-2011, 08:46 PM

Fixed the passenger side outer door handle on the Heap. The handle is rarely used, I guess they like grease, works like new.

Built a switch box for air control on my '50, few bucks at Radio Shack, almost done. The Shack was out of the type switch I wanted for a master dump control. I'll add one later.

powerdriver 1958 · 10-02-2011, 08:52 PM

Swapped out fuel tank and replaced both outer tie rods on my wife's car .

Helped No.2 son replace the heater core in his 2000 Sierra . Whata job !

Earlier in the week helped No.1 son swap out the distributor in his 96 Camaro , Replaced the steering gear on my 84 c30

Thursday , Welded up the tailpipe on No.3 sons caddy

**old Rusty C10** · 10-02-2011, 08:58 PM

Quote:

Originally Posted by gofastbobby

I watched my Tigers take down your Yankees.

[/i][/size]

Sir, with all due respect. my two favorite teams in baseball are the METS and whomever is PLAYING the yankees..so it looks like we are both rooting for the same team

gofastbobby · 10-02-2011, 09:05 PM

Quote:

Originally Posted by old Rusty C10

Sir, with all due respect. my two favorite teams in baseball are the METS and whomever is PLAYING the yankees..so it looks like we are both rooting for the same team

Well played.
Posted via Mobile Device

S10Fan · 10-02-2011, 09:13 PM

Detroit is probably not a popular city today with our Texas members.......

gofastbobby · 10-02-2011, 09:20 PM

This weekend has been a great time to be a sports fan here in Michigan.
Posted via Mobile Device

foamypirate · 10-02-2011, 09:23 PM

AC compressor for the house went out...going to replace the whole unit since the condenser is 10 years old and not in great shape (not too mention inefficient). 3.5-5k out of my pockets = no progress on truck for a while.

J Knight · 10-02-2011, 09:52 PM

Didnt work on the truck but did pick up a 454 short block bored .030 over, new pistons, new steel crank, new HV oil pump, new cam and lifters, new timing chain, new freeze plugs, new moroso oil pan, all the pullys and brackets, and the engine stand its on for $500

**Palf70Step** · 10-02-2011, 10:19 PM

Cruised in it. Felt great to finally have an old one mobile again. Today was the start of our week long classic car cruise in, so the Hoopty and I will be logging in some miles and shows.

85burb · 10-02-2011, 11:21 PM

Compelated the burbs offical last one tire fire and droped him off at the diff shop to have a new r&p and detroit truetrac installed.

WigglesTheHoly · 10-03-2011, 09:00 AM

Cleaned the truck up and hauled the wife and my cooler to a bonfire. Did some of my "honey do" list to get ready for my daughter who will be showing up any day now.

83highsierra · 10-03-2011, 09:23 AM

got to drive my 83 for the first time in a little while after swapping from the inline to the v8 and i bent my 2.5" exhaust and welded it to my new thrush turbos(btw it sounds nasty =-) and whent to church and showed it off at a tailgate festival. i grilled hotdogs and we had a good time

Grande Rojo · 10-03-2011, 09:27 AM

Went to the Street Machine Nationals in Springfield, MO. got to meet Chip Foose.

HTX86chevy · 10-03-2011, 10:08 AM

^^^ AWESOME , I would scream like a teenage girl if I met FOOSE haha

ymerej71 · 10-03-2011, 12:04 PM

Beautiful weather weekend for us north Texans! Finally some cooler weather... Took the family to the Texas State Fair on Saturday. Yesterday afternoon I pulled the springs out from under my '79 and chopped off a full coil to get the nose down / rake look I've been wanting for my truck.

ymerej71 · 10-03-2011, 12:06 PM

Quote:

Originally Posted by Grande Rojo

Went to the Street Machine Nationals in Springfield, MO. got to meet Chip Foose.

AWESOME!!! I've yet to see a design of his that I didn't love...

gofastbobby · 10-03-2011, 03:36 PM

Pics with new Wheels:

What it looked like before:

Doug_J · 10-03-2011, 06:00 PM

put my 4in lift on.

1LowToy · 10-03-2011, 10:16 PM

Raked leaves for a day and a half. Went to look at parts (bought them today Monday). Made a deposit on a condo for an investment... Don't know if that was a good idea

**N2TRUX** · 10-03-2011, 10:49 PM

Quote:

Originally Posted by S10Fan

Detroit is probably not a popular city today with our Texas members.......

No. but we do love us some Pittsburgh Steelers. Sorry, boys those terrible towels didn't work their mojo this weekend.

lanconcj · 10-04-2011, 12:02 AM

I changed the u-joints on my 86. While I had the drive shaft out, I cleaned it up and painted it. I expect my new 350 to be delivered in the next couple of days. They do not give a tracking # for freight shipping.

von guido · 10-04-2011, 01:16 AM

abused the **** outta my k5...put a new fuel filter and spindles on my 2wd 78 and got started on a roll bar for it as well

10-02-2011, 05:03 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	what did you get done 10/02/2011 edition I didnt get anything done due to weather issues here but i have the parts to swap in the tilt column if all goes well and add my new wheel.. i have the new seat and will try to upholster that tomorrow .. I did do something today tho not truck related which im kinda proud of .. I qualified with the shotgun for a hunting license and bought myself a compound bow to try the archery one next How about you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-02-2011, 05:15 PM	#2
notyo_cheez Registered User Join Date: Apr 2011 Location: corpus christi, tx - america's fattest city Posts: 253	Re: what did you get done 10/02/2011 edition Chores and stuff this weekend, last weekend repaired kitchen cabinets. Haven't picked on the project in awhile, last thing I did was start stripping out the wiring harness in the engine compartment. Been slow going due to 100 F in the shade down here...

10-02-2011, 08:46 PM	#4
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: what did you get done 10/02/2011 edition Fixed the passenger side outer door handle on the Heap. The handle is rarely used, I guess they like grease, works like new. Built a switch box for air control on my '50, few bucks at Radio Shack, almost done. The Shack was out of the type switch I wanted for a master dump control. I'll add one later. Attached Images __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-02-2011, 08:52 PM	#5
powerdriver 1958 Kid's Mechanic Join Date: Nov 2006 Location: Kansas City Posts: 8,241	Re: what did you get done 10/02/2011 edition Swapped out fuel tank and replaced both outer tie rods on my wife's car . Helped No.2 son replace the heater core in his 2000 Sierra . Whata job ! Earlier in the week helped No.1 son swap out the distributor in his 96 Camaro , Replaced the steering gear on my 84 c30 Thursday , Welded up the tailpipe on No.3 sons caddy

10-02-2011, 09:13 PM	#8
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: what did you get done 10/02/2011 edition Detroit is probably not a popular city today with our Texas members....... __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-02-2011, 09:20 PM	#9
gofastbobby Registered User Join Date: Mar 2011 Location: Kalamazoo, MI Posts: 120	Re: what did you get done 10/02/2011 edition This weekend has been a great time to be a sports fan here in Michigan. Posted via Mobile Device __________________ '76 C10 "BIG10" SWB 454/400 Mostly Stock.

10-02-2011, 09:23 PM	#10
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: what did you get done 10/02/2011 edition AC compressor for the house went out...going to replace the whole unit since the condenser is 10 years old and not in great shape (not too mention inefficient). 3.5-5k out of my pockets = no progress on truck for a while.

10-02-2011, 09:52 PM	#11
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: what did you get done 10/02/2011 edition Didnt work on the truck but did pick up a 454 short block bored .030 over, new pistons, new steel crank, new HV oil pump, new cam and lifters, new timing chain, new freeze plugs, new moroso oil pan, all the pullys and brackets, and the engine stand its on for $500 Attached Images __________________ John 82 Chevy Silverado 350ci/TH350

10-02-2011, 10:19 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: what did you get done 10/02/2011 edition Cruised in it. Felt great to finally have an old one mobile again. Today was the start of our week long classic car cruise in, so the Hoopty and I will be logging in some miles and shows. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-02-2011, 11:21 PM	#13
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: what did you get done 10/02/2011 edition Compelated the burbs offical last one tire fire and droped him off at the diff shop to have a new r&p and detroit truetrac installed. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

10-03-2011, 09:00 AM	#14
WigglesTheHoly IT Guy/ Father/ Chevy lover Join Date: Feb 2010 Location: Hoisington, KS Posts: 568	Re: what did you get done 10/02/2011 edition Cleaned the truck up and hauled the wife and my cooler to a bonfire. Did some of my "honey do" list to get ready for my daughter who will be showing up any day now. __________________ 78 Chevy (Pictures) SOLD 79 Chevy LWB (pasture) 83 Chevy LWB (crushed rusted beyond repair) 02 TrailBlazer SOLD 03 VW Passat wagonSOLD 95 extended cab silveradoSOLD (still in family) 05 Crew Cab Silverado 5.3 (The Turd) WTB: 66 El camino Technology Specialist aspiring to be a gear head.

10-03-2011, 09:23 AM	#15
83highsierra Registered User Join Date: Jun 2011 Location: georgetown kentucky Posts: 193	Re: what did you get done 10/02/2011 edition got to drive my 83 for the first time in a little while after swapping from the inline to the v8 and i bent my 2.5" exhaust and welded it to my new thrush turbos(btw it sounds nasty =-) and whent to church and showed it off at a tailgate festival. i grilled hotdogs and we had a good time

10-03-2011, 09:27 AM	#16
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: what did you get done 10/02/2011 edition Went to the Street Machine Nationals in Springfield, MO. got to meet Chip Foose. Attached Images __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

10-03-2011, 10:08 AM	#17
HTX86chevy Registered User Join Date: Feb 2010 Location: Houston, Tx Posts: 349	Re: what did you get done 10/02/2011 edition ^^^ AWESOME , I would scream like a teenage girl if I met FOOSE haha __________________

10-03-2011, 12:04 PM	#18
ymerej71 Registered User Join Date: Jan 2011 Location: Gainesville, TX Posts: 144	Re: what did you get done 10/02/2011 edition Beautiful weather weekend for us north Texans! Finally some cooler weather... Took the family to the Texas State Fair on Saturday. Yesterday afternoon I pulled the springs out from under my '79 and chopped off a full coil to get the nose down / rake look I've been wanting for my truck.



Register or Log In To remove these advertisements.

10-03-2011, 03:36 PM	#20
gofastbobby Registered User Join Date: Mar 2011 Location: Kalamazoo, MI Posts: 120	Re: what did you get done 10/02/2011 edition Pics with new Wheels: What it looked like before: __________________ '76 C10 "BIG10" SWB 454/400 Mostly Stock.

10-03-2011, 06:00 PM	#21
Doug_J Registered User Join Date: Apr 2009 Location: Moore,OK Posts: 178	Re: what did you get done 10/02/2011 edition put my 4in lift on. Attached Images

10-03-2011, 10:16 PM	#22
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: what did you get done 10/02/2011 edition Raked leaves for a day and a half. Went to look at parts (bought them today Monday). Made a deposit on a condo for an investment... Don't know if that was a good idea

10-04-2011, 12:02 AM	#24
lanconcj Registered User Join Date: May 2011 Location: Anahuac Tx Posts: 111	Re: what did you get done 10/02/2011 edition I changed the u-joints on my 86. While I had the drive shaft out, I cleaned it up and painted it. I expect my new 350 to be delivered in the next couple of days. They do not give a tracking # for freight shipping.

10-04-2011, 01:16 AM	#25
von guido Registered User Join Date: Sep 2009 Location: outside atlanta Posts: 156	Re: what did you get done 10/02/2011 edition abused the **** outta my k5...put a new fuel filter and spindles on my 2wd 78 and got started on a roll bar for it as well __________________ officer,we weren't racing.. he was merely pacing me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.