MO Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli,etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bguild · 10-05-2011, 09:57 AM

All is for sell.. Prices are with shipping anywhere in the conti US.. Payment is PAYPAL only.. Please post that you want them on here and I will PM you my paypal address.

---Small Block Edelbrock intake Its new.. its the performer style. 70 bucks shipped. <<-- New price

---I have a set of upper and lower front air ride plates --- 40 shipped.

---I also a front bed panel piece that converts a steel bed floor to a wood bed floor. Its new 15 bucks picked up. Will not ship.

---nice AC radio dash patch. I can get pics posted soon. 30 bucks shipped.

---pretty much complete wiring harness, has fuse block and I think all factory ends. 20 bucks shipped.

---TWO Pirelli 302/35/20 tires. the tread looks almost new but there are some patches in both of them. I think maybe the previous owner ran over some nails or something.. They are all in the tread so they should work fine. These things are wide...
120 shipped.

---roof has no rust all except a tiny bit under the rear window. Just surface though nothing through. The roof and frame are perfect. Has a headliner mount inner roof. 40 bucks pick up only.

GobbleStalker · 10-05-2011, 10:08 AM

Price on headers? Are they for sbc?
Interested.

bguild · 10-05-2011, 10:10 AM

Quote:

Originally Posted by GobbleStalker

Price on headers? Are they for sbc?
Interested.

I was in the process of adding prices.. I also dont have that headman box anymore.. I do have all the parts and gaskets that are new in plastic that will come with these.. They are small block.

GobbleStalker · 10-05-2011, 10:13 AM

Will these headers work fine with the CPP mounts or do I still need to do modifications?

bguild · 10-05-2011, 10:17 AM

Quote:

Originally Posted by GobbleStalker

Will these headers work fine with the CPP mounts or do I still need to do modifications?

I am guessing they will work.. that was going to be my plan.> I think they will work but I am unsure 100% they will work. The factory ones will work but you have to trim a little a little off one side and just weld it to keep strentgh There is a thread on this somewhere on the board. It looked like the CPP mounts would solve the issue but I never got to the point to try this. I know that is clear as mud but to answer you question I am unsure but I think so.

GobbleStalker · 10-05-2011, 10:20 AM

Interested in the mounts and headers once you confirm header part number.

Thanks
Kevin

bguild · 10-05-2011, 10:21 AM

http://67-72chevytrucks.com/vboard/s...s+motor+mounts

Looks like by this thread they will work.. I am pretty sure the part number is the same.. I am still looking for the thread on that shows some pictures. It looks like the tubular mounts will work.

creepdogg · 10-05-2011, 10:36 AM

Are those new style headers with the donut gaskets and not the paper ones on the collectors?

bguild · 10-05-2011, 10:43 AM

MODEL NUMBER CONFIRMED and it is #68608 I believe they are paper but I can take some pictures of the gaskets and collectors.

GobbleStalker · 10-05-2011, 12:16 PM

Quote:

Originally Posted by bguild

MODEL NUMBER CONFIRMED and it is #68608 I believe they are paper but I can take some pictures of the gaskets and collectors.

That would be great. Thanks

VA72C10 · 10-05-2011, 01:05 PM

best price for notch and intake shipped to me?

bguild · 10-05-2011, 01:09 PM

Quote:

Originally Posted by VA72C10

best price for notch and intake shipped to me?

What about 190.00 Shipped? Let me know I can PM you my paypal.

bguild · 10-05-2011, 01:10 PM

Just added a CPP adjustable track bar to the listing.. Forgot I had this as well.

creepdogg · 10-05-2011, 04:56 PM

Quote:

Originally Posted by bguild

MODEL NUMBER CONFIRMED and it is #68608 I believe they are paper but I can take some pictures of the gaskets and collectors.

Sounds good let me know, I did some reading, looks like they should work out, I have CPP mounts already, just got em this week. Too bad I didnt wait and get yours!

**LockDoc** · 10-05-2011, 05:15 PM

-
I will take the track bar for $35 shipped. Please PM payment info.

I presume it comes with brackets.

LockDoc

bguild · 10-05-2011, 05:45 PM

Quote:

Originally Posted by LockDoc

-
I will take the track bar for $35 shipped. Please PM payment info.

I presume it comes with brackets.

LockDoc

Its just the track bar. Its exactly the way it comes from CPP if you order from them. Its still in the CPP box. No brackets though.. its adjustable on both ends. I will PM you my paypal but please let me know either way if you want it.

GobbleStalker · 10-05-2011, 06:24 PM

What is your best price for the headers and the mounts shipped to 13601 NY.

70-Shorty · 10-05-2011, 06:33 PM

put me in line for the notch
Tim

bguild · 10-05-2011, 07:01 PM

Quote:

Originally Posted by GobbleStalker

What is your best price for the headers and the mounts shipped to 13601 NY.

Maybe 300 shipped. I am getting alot interest in them so I hate to go much lower.
Posted via Mobile Device

bguild · 10-05-2011, 07:03 PM

Quote:

Originally Posted by VA72C10

best price for notch and intake shipped to me?

Are u in on the notch and intake? Looks like someone else is asking about the notch. Let me know.
Posted via Mobile Device

GobbleStalker · 10-05-2011, 07:16 PM

I will take the headers and mounts please send me your paypal info. I will paypal you later tonight.

Thanks
Kevin

bguild · 10-05-2011, 07:39 PM

Pm sent thanks
Posted via Mobile Device

GobbleStalker · 10-05-2011, 07:50 PM

Quote:

Originally Posted by bguild

Pm sent thanks
Posted via Mobile Device

No Pm recieved??

VA72C10 · 10-05-2011, 07:51 PM

I'll pass on the notch and intake. The notch is a KILLER deal...it's 160 or 170 plus shipping from CPP....

bguild · 10-05-2011, 07:56 PM

Quote:

Originally Posted by 70-Shorty

put me in line for the notch
Tim

Tim do you want the notch? Your up
Posted via Mobile Device

10-05-2011, 09:57 AM	#1
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli,etc All is for sell.. Prices are with shipping anywhere in the conti US.. Payment is PAYPAL only.. Please post that you want them on here and I will PM you my paypal address. ---Small Block Edelbrock intake Its new.. its the performer style. 70 bucks shipped. <<-- New price ---I have a set of upper and lower front air ride plates --- 40 shipped. ---I also a front bed panel piece that converts a steel bed floor to a wood bed floor. Its new 15 bucks picked up. Will not ship. ---nice AC radio dash patch. I can get pics posted soon. 30 bucks shipped. ---pretty much complete wiring harness, has fuse block and I think all factory ends. 20 bucks shipped. ---TWO Pirelli 302/35/20 tires. the tread looks almost new but there are some patches in both of them. I think maybe the previous owner ran over some nails or something.. They are all in the tread so they should work fine. These things are wide... 120 shipped. ---roof has no rust all except a tiny bit under the rear window. Just surface though nothing through. The roof and frame are perfect. Has a headliner mount inner roof. 40 bucks pick up only. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED Last edited by bguild; 10-18-2011 at 09:30 AM.

10-05-2011, 10:08 AM	#2
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Price on headers? Are they for sbc? Interested. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-05-2011, 10:13 AM	#4
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Will these headers work fine with the CPP mounts or do I still need to do modifications? __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-05-2011, 10:21 AM	#7
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli http://67-72chevytrucks.com/vboard/s...s+motor+mounts Looks like by this thread they will work.. I am pretty sure the part number is the same.. I am still looking for the thread on that shows some pictures. It looks like the tubular mounts will work. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-05-2011, 10:36 AM	#8
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Are those new style headers with the donut gaskets and not the paper ones on the collectors?

10-05-2011, 10:20 AM	#6
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Interested in the mounts and headers once you confirm header part number. Thanks Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-05-2011, 10:43 AM	#9
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli MODEL NUMBER CONFIRMED and it is #68608 I believe they are paper but I can take some pictures of the gaskets and collectors. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-05-2011, 01:05 PM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli best price for notch and intake shipped to me? __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-05-2011, 01:10 PM	#13
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Just added a CPP adjustable track bar to the listing.. Forgot I had this as well. __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-05-2011, 05:15 PM	#15
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,818	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli - I will take the track bar for $35 shipped. Please PM payment info. I presume it comes with brackets. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 10-05-2011 at 05:30 PM.

10-05-2011, 06:24 PM	#17
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli What is your best price for the headers and the mounts shipped to 13601 NY. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-05-2011, 06:33 PM	#18
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli put me in line for the notch Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

10-05-2011, 07:16 PM	#21
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli I will take the headers and mounts please send me your paypal info. I will paypal you later tonight. Thanks Kevin __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

10-05-2011, 07:39 PM	#22
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli Pm sent thanks Posted via Mobile Device __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

10-05-2011, 07:51 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Part out... CPP notch, CPP Motor Mounts, Headman Headers, 20 inch pirelli I'll pass on the notch and intake. The notch is a KILLER deal...it's 160 or 170 plus shipping from CPP.... __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.