NJ FS: Edelbrock performer manifold for center bolt heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-13-2011, 12:40 PM

I have a nice Edelbrock performer intake manifold for center bolt heads with very low miles. All holes/threads r good, a good cleaning and it will looks like new. Asking $60 plus the ride.

Thanks
Scott

**ScottH** · 10-13-2011, 08:25 PM

ttt

**ScottH** · 10-14-2011, 09:10 AM

ttt

67gmcstepside · 10-14-2011, 09:49 AM

Scott, would u take 50 with pickup?

**ScottH** · 10-14-2011, 11:14 AM

Yupper I can do that.

67gmcstepside · 10-14-2011, 11:41 AM

Scott, is this the 2101 model, cant see in the pics.

**ScottH** · 10-14-2011, 12:01 PM

Sorry, should have included that in the post.
Its a 2104 model, Summit says: Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore Flange, Chevy, 5.0/5.7L $177.95

67gmcstepside · 10-14-2011, 12:48 PM

Scott I think the 2104 are for GM heads from 77 and up, mine are 70. Not sure why but it seems this wouldnt fir. Sorry for the trouble.

**ScottH** · 10-14-2011, 02:28 PM

Yes, this is for center bolt heads, I believe from 87-95.

**ScottH** · 10-15-2011, 08:14 AM

ttt

**ScottH** · 10-16-2011, 08:54 AM

No one interested for $50 plus the ride?

HeavyMetalChevy · 10-16-2011, 09:12 AM

let me think...got a whole 71 coming in today... check the money and I will more than likely grab.. i would like to powder coat...

**ScottH** · 10-16-2011, 07:05 PM

ttt

**ScottH** · 10-17-2011, 06:07 PM

$50 for a $177 part.....and no interest???

HeavyMetalChevy · 10-17-2011, 08:33 PM

Quote:

Originally Posted by ScottH

$50 for a $177 part.....and no interest???

I agree...Bump for you I would take like stated before but I have a 2101 on my 1966 327 block and a 2401 on my 1988 250 block... See my dilemma

**SOON2BLAZE** · 10-17-2011, 11:56 PM

I'll take it. pm me with shipping to 84737 thanks

**ScottH** · 10-18-2011, 12:35 AM

Will check on shipping tomorrow and PM u the info.

thanks

oldblue1968chevy · 10-18-2011, 11:21 AM

Really good deal for someone looking to go with vortec heads.!!

**ScottH** · 10-18-2011, 06:00 PM

PM sent to soon2blaze

thanks for the bump john

**ScottH** · 10-20-2011, 04:03 PM

sold to soon2blaze

thanks!

Lee H · 10-20-2011, 07:09 PM

Must be the angle of the pictures but that looks like a regular intake, not vortec.
Posted via Mobile Device

**SOON2BLAZE** · 10-20-2011, 07:30 PM

not for vortec heads.

10-13-2011, 12:40 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	FS: Edelbrock performer manifold for center bolt heads I have a nice Edelbrock performer intake manifold for center bolt heads with very low miles. All holes/threads r good, a good cleaning and it will looks like new. Asking $60 plus the ride. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-13-2011, 08:25 PM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 09:10 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 09:49 AM	#4
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott, would u take 50 with pickup?

10-14-2011, 11:14 AM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads Yupper I can do that. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 11:41 AM	#6
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott, is this the 2101 model, cant see in the pics.

10-14-2011, 12:01 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads Sorry, should have included that in the post. Its a 2104 model, Summit says: Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore Flange, Chevy, 5.0/5.7L $177.95 __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 12:48 PM	#8
67gmcstepside Registered User Join Date: Jan 2010 Location: jackson Posts: 676	Re: FS: Edelbrock performer manifold for center bolt heads Scott I think the 2104 are for GM heads from 77 and up, mine are 70. Not sure why but it seems this wouldnt fir. Sorry for the trouble.

10-14-2011, 02:28 PM	#9
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads Yes, this is for center bolt heads, I believe from 87-95. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-15-2011, 08:14 AM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-16-2011, 08:54 AM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads No one interested for $50 plus the ride? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-16-2011, 09:12 AM	#12
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: FS: Edelbrock performer manifold for center bolt heads let me think...got a whole 71 coming in today... check the money and I will more than likely grab.. i would like to powder coat... __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-16-2011, 07:05 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads ttt __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2011, 06:07 PM	#14
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads $50 for a $177 part.....and no interest??? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-17-2011, 11:56 PM	#16
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: FS: Edelbrock performer manifold for center bolt heads I'll take it. pm me with shipping to 84737 thanks



Register or Log In To remove these advertisements.

10-18-2011, 12:35 AM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads Will check on shipping tomorrow and PM u the info. thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-18-2011, 11:21 AM	#18
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: FS: Edelbrock performer manifold for center bolt heads Really good deal for someone looking to go with vortec heads.!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-18-2011, 06:00 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads PM sent to soon2blaze thanks for the bump john __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-20-2011, 04:03 PM	#20
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Edelbrock performer manifold for center bolt heads sold to soon2blaze thanks! __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-20-2011, 07:09 PM	#21
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,147	Re: FS: Edelbrock performer manifold for center bolt heads Must be the angle of the pictures but that looks like a regular intake, not vortec. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

10-20-2011, 07:30 PM	#22
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: FS: Edelbrock performer manifold for center bolt heads not for vortec heads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.