Need a pic of under dash clutch linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 10-14-2011, 10:26 PM

I recently picked up a project 66 swb that needed a few things done to get it moving and driving. One of them is the clutch linkage. I'm pretty sure I have it correctly installed on the engine to the clutch fork, but when I try to push the clutch pedal down it just goes all the way to the floor. I'm thinking that the PO (not the brightest candle) did something incorrectly with it under the dash. If someone could post a pic so I see how it correctly is positioned, I would greatly appreciate it.

Thanks!

Scott

**DPowers** · 10-14-2011, 10:42 PM

Don't know if this will help or not- after I cut my clutch pedal.

**ScottH** · 10-14-2011, 10:48 PM

thanks, but the part I need to see is the other side of the brake pedal (where the rod that goes to Z bar is connected).

**DPowers** · 10-14-2011, 11:12 PM

This is all I got

daverod · 10-14-2011, 11:45 PM

Lmc

**pdxhall** · 10-15-2011, 03:31 AM

I've got this one.

**ScottH** · 10-15-2011, 08:13 AM

Thanks guys, will look at it this weekend and see if I have enough to go on.

10-14-2011, 10:26 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Need a pic of under dash clutch linkage I recently picked up a project 66 swb that needed a few things done to get it moving and driving. One of them is the clutch linkage. I'm pretty sure I have it correctly installed on the engine to the clutch fork, but when I try to push the clutch pedal down it just goes all the way to the floor. I'm thinking that the PO (not the brightest candle) did something incorrectly with it under the dash. If someone could post a pic so I see how it correctly is positioned, I would greatly appreciate it. Thanks! Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 10:42 PM	#2
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Need a pic of under dash clutch linkage Don't know if this will help or not- after I cut my clutch pedal. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

10-14-2011, 10:48 PM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Need a pic of under dash clutch linkage thanks, but the part I need to see is the other side of the brake pedal (where the rod that goes to Z bar is connected). __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

10-14-2011, 11:12 PM	#4
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: Need a pic of under dash clutch linkage This is all I got Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

10-14-2011, 11:45 PM	#5
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Need a pic of under dash clutch linkage Lmc Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

10-15-2011, 03:31 AM	#6
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,080	Re: Need a pic of under dash clutch linkage I've got this one. Attached Images

10-15-2011, 08:13 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Need a pic of under dash clutch linkage Thanks guys, will look at it this weekend and see if I have enough to go on. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.