UT tilt column, big block high hump, fan shroud, BB frame mounts, heat shield - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RaTcheTmasTer** · 11-13-2011, 02:52 PM

I have a bunch of BB parts.

These are some of what I have from a 1972 if I remember right. I had been collecting these for a future project.

ALL PRICES PLUS SHIPPING from 84062

NO PM'S please.

Big block fan shroud. Excellent. No damage. $125
Big block pass side heat shield $40
Big block frame mounts $135 (flat rate priority mail $14.95) SOLD
Big block high hump. Solid and not dented up. No holes. $75 SOLD
Automatic tilt column. tight and in good shape. $295 SOLD

All prices OBO

I will probably list these on craigs list too but I have not yet done that.

NO PM'S please. Post offers or what you want here only as I have a hard time keeping track of multiple locations for responses to this Thread.

Thanks
Tim

**RaTcheTmasTer** · 11-13-2011, 04:05 PM

Pics

fwells67 · 11-13-2011, 08:23 PM

do you have the clamshells that bolt to the block

**RaTcheTmasTer** · 11-13-2011, 09:12 PM

The frame mounts come as pictured.
Are you looking for just clam shells?

fwells67 · 11-13-2011, 10:08 PM

no i was wanting the orig block mounts too

cpisani70@aol.com · 11-13-2011, 11:30 PM

Do you have BB power steering setup for 71 C20 ?
Posted via Mobile Device

**RaTcheTmasTer** · 11-17-2011, 12:40 PM

Quote:

Originally Posted by cpisani70@aol.com

Do you have BB power steering setup for 71 C20 ?
Posted via Mobile Device

Sorry I didn't get back to you right away. For some reason I didn't get notification of a reply. I will have to check daily rather than wait for an email from the notification system.

Yes I do have a complete power steering setup with brackets, hose, pump and reservoir.

How about $235 shipped? I can get pics for you.
I can work with you on total depending on actual shipping cost.

**72 paul** · 11-17-2011, 03:00 PM

ratchetmaster will you do 135 shipped to 89109 las vegas, nv. for big block mounts?

**RaTcheTmasTer** · 11-17-2011, 04:04 PM

Quote:

Originally Posted by 72 paul

ratchetmaster will you do 135 shipped to 89109 las vegas, nv. for big block mounts?

Sure. That will work.

I will flat rate large box USPS. $14.95. I checked other methods but this was the best rate I could get because of the weight. But since you are so close, I will double check to see if fedex is cheaper.

You can pay paypal or MO.

paypal address is

ratchetmasterman@hotmail.com

Thanks
Tim

**RaTcheTmasTer** · 11-18-2011, 03:07 PM

All the way up!

**schwoch1** · 11-19-2011, 12:43 AM

Is it a truck or van column? Pictures??????? Will take pending pictures?

Mike

**RaTcheTmasTer** · 11-19-2011, 10:13 PM

Quote:

Originally Posted by schwoch1

Is it a truck or van column? Pictures??????? Will take pending pictures?

Mike

Mike
it is a true truck column out of a 72.
I will get pics up tomorrow.
Thanks

**RaTcheTmasTer** · 11-21-2011, 02:23 AM

Here are the pics of the column. Steering wheel NOT included.

It is tight, turn signal switch in good shape.
Levers with little or no rust. Shift handle very nice.

**RaTcheTmasTer** · 11-21-2011, 02:29 AM

Quote:

Originally Posted by 72 paul

ratchetmaster will you do 135 shipped to 89109 las vegas, nv. for big block mounts?

Boxed up and shipping in the morning.

Thanks

rich67 · 11-21-2011, 02:51 AM

could i get a shipping quote to 62312 please? do you know if will fit a 67? thanx rich

**schwoch1** · 11-21-2011, 10:28 AM

I will take the column, let me know what the shipping will be to 53105 and I will get you paid!

Mike

rich67 · 11-21-2011, 10:51 AM

Quote:

Originally Posted by schwoch1

I will take the column, let me know what the shipping will be to 53105 and I will get you paid!

Mike

good buy dude.

**RaTcheTmasTer** · 11-21-2011, 11:02 AM

Ok Mike. Consider it yours. I will get a shipping quote tonight when I get home from work.

**RaTcheTmasTer** · 11-22-2011, 01:22 AM

Quote:

Originally Posted by schwoch1

I will take the column, let me know what the shipping will be to 53105 and I will get you paid!

Mike

Hi Mike
15 lbs 37x7x6 FedEx with insurance for cost.

$23.83 shipped to your door.

Tim

**schwoch1** · 11-22-2011, 01:47 AM

Sent PM.... thanks!!!

**RaTcheTmasTer** · 11-24-2011, 03:02 AM

All the way up!

Column sold.

**RaTcheTmasTer** · 12-01-2011, 11:46 PM

Back it up!!

effects66 · 12-03-2011, 11:35 PM

Interested in your hump if it is still for sale.

**RaTcheTmasTer** · 12-04-2011, 01:51 AM

Yes, I still have it.

$13 shipping to San Jose, california.
Thanks.

Tim

REEDS 72 · 12-04-2011, 08:08 AM

Hi just seen your stuf nice parts hey do you have a a set of rear wheel tubs you want to sell I can come look I live in American Fork.

11-13-2011, 02:52 PM	#1
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	tilt column, big block high hump, fan shroud, BB frame mounts, heat shield I have a bunch of BB parts. These are some of what I have from a 1972 if I remember right. I had been collecting these for a future project. ALL PRICES PLUS SHIPPING from 84062 NO PM'S please. Big block fan shroud. Excellent. No damage. $125 Big block pass side heat shield $40 Big block frame mounts $135 (flat rate priority mail $14.95) SOLD Big block high hump. Solid and not dented up. No holes. $75 SOLD Automatic tilt column. tight and in good shape. $295 SOLD All prices OBO I will probably list these on craigs list too but I have not yet done that. NO PM'S please. Post offers or what you want here only as I have a hard time keeping track of multiple locations for responses to this Thread. Thanks Tim Last edited by RaTcheTmasTer; 12-05-2011 at 02:53 PM.

11-13-2011, 04:05 PM	#2
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Pics

11-13-2011, 08:23 PM	#3
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield do you have the clamshells that bolt to the block

11-13-2011, 09:12 PM	#4
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield The frame mounts come as pictured. Are you looking for just clam shells?

11-13-2011, 10:08 PM	#5
fwells67 Registered User Join Date: Mar 2011 Location: columbus ohio Posts: 302	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield no i was wanting the orig block mounts too

11-13-2011, 11:30 PM	#6
cpisani70@aol.com Registered User Join Date: Oct 2010 Location: Wallingford CT Posts: 260	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Do you have BB power steering setup for 71 C20 ? Posted via Mobile Device

11-17-2011, 03:00 PM	#8
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 503	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield ratchetmaster will you do 135 shipped to 89109 las vegas, nv. for big block mounts?

11-18-2011, 03:07 PM	#10
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield All the way up!

11-19-2011, 12:43 AM	#11
schwoch1 Local Detroit diesel nut! Join Date: Apr 2008 Location: Burlington, WI Posts: 175	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Is it a truck or van column? Pictures??????? Will take pending pictures? Mike __________________ Nothing cool anymore, I am old and boring....

11-21-2011, 02:23 AM	#13
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Here are the pics of the column. Steering wheel NOT included. It is tight, turn signal switch in good shape. Levers with little or no rust. Shift handle very nice.

11-21-2011, 02:51 AM	#15
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield could i get a shipping quote to 62312 please? do you know if will fit a 67? thanx rich

11-21-2011, 10:28 AM	#16
schwoch1 Local Detroit diesel nut! Join Date: Apr 2008 Location: Burlington, WI Posts: 175	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield I will take the column, let me know what the shipping will be to 53105 and I will get you paid! Mike __________________ Nothing cool anymore, I am old and boring....

11-21-2011, 11:02 AM	#18
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Ok Mike. Consider it yours. I will get a shipping quote tonight when I get home from work.

11-22-2011, 01:47 AM	#20
schwoch1 Local Detroit diesel nut! Join Date: Apr 2008 Location: Burlington, WI Posts: 175	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Sent PM.... thanks!!! __________________ Nothing cool anymore, I am old and boring....

11-24-2011, 03:02 AM	#21
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield All the way up! Column sold.



Register or Log In To remove these advertisements.

12-01-2011, 11:46 PM	#22
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Back it up!!

12-03-2011, 11:35 PM	#23
effects66 Registered User Join Date: Dec 2008 Location: San Jose Posts: 206	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Interested in your hump if it is still for sale.

12-04-2011, 01:51 AM	#24
RaTcheTmasTer Automania Join Date: Jun 2009 Location: Pleasant Grove, in the Mountain West. Posts: 351	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Yes, I still have it. $13 shipping to San Jose, california. Thanks. Tim

12-04-2011, 08:08 AM	#25
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: tilt column, big block high hump, fan shroud, BB frame mounts, heat shield Hi just seen your stuf nice parts hey do you have a a set of rear wheel tubs you want to sell I can come look I live in American Fork.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.