TX 1978 swb - parts truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zimmstoy · 11-20-2011, 04:46 PM

SWB Chevy for parts - really just want it out of the yard.

350 Engine - Good for a core
350 Turbo Transmission - Good for core
12 Bolt rear - I beleive it is a non-posi

Pics tell the story. Salvage Title clear and in my name. $300

Truck is located in Cedar Park, TX just 2 Minutes north of Austin, TX.

PM or call Scott 512.nine63.nine274

**68350** · 11-20-2011, 07:07 PM

Need the trim off the drivers front fender, trim off drivers door, both headlight grille pieces, along with the driving lights and headlight bezels. price shipped to 58801. thanks, Doug

BigRed76 · 11-20-2011, 07:58 PM

I need all of the body trim. How is the passenger side?
Posted via Mobile Device

**68350** · 11-20-2011, 08:20 PM

add the wheel lip moulding on the drivers fender to my list as well. if you have the other three I'd take the whole set.

madcow75 · 11-20-2011, 08:25 PM

Interested in dash bezel with vents and passenger side dash trim and vents if they are in descent shape. Can you please send pics of them. If they are in good shape how much to 14222?

zimmstoy · 11-20-2011, 10:02 PM

I will get pics of all the pieces for you all on Tuesday afternoon. That is the next time I will be near the truck in daylight. Hope that works for all of you.

**ScottH** · 11-21-2011, 12:00 AM

what kind of shape is the dash pad in?

C15_Sierra · 11-21-2011, 12:26 AM

I could use the evaporator housing...too bad, I used to live in Austin, I could've picked it up..I used to drive thru Cedar Park all the time to go work on my truck (I kept it at my boss' shop in Liberty Hill)...thanks!

**68350** · 11-21-2011, 07:20 AM

sounds good to me

aggie91 · 11-21-2011, 02:30 PM

What do you want for the rear end?

zimmstoy · 11-22-2011, 10:47 PM

Guys - its gonna be tomorrow on the pics. Sorry for the delay.

aggie91 - it's gonna be $300 and the rest of the truck comes with it. I really dont wanna mess around with yanking it out and then scrapping the truck.

zimmstoy · 11-22-2011, 10:48 PM

Quote:

Originally Posted by C15_Sierra

I could use the evaporator housing...too bad, I used to live in Austin, I could've picked it up..I used to drive thru Cedar Park all the time to go work on my truck (I kept it at my boss' shop in Liberty Hill)...thanks!

Housing is cracked. Sorry man.

zimmstoy · 11-22-2011, 10:49 PM

Quote:

Originally Posted by ScottH

what kind of shape is the dash pad in?

its shot.

aggie91 · 11-25-2011, 09:34 AM

Quote:

Originally Posted by zimmstoy

Guys - its gonna be tomorrow on the pics. Sorry for the delay.

aggie91 - it's gonna be $300 and the rest of the truck comes with it. I really dont wanna mess around with yanking it out and then scrapping the truck.

I will be down that way around the 18th of December. I will call you. If you still have it, I might be interested.

Thanks,

zimmstoy · 11-25-2011, 09:57 PM

68350 - you needed
add the wheel lip moulding on the drivers fender to my list as well. if you have the other three I'd take the whole set.[/QUOTE]
Need the trim off the drivers front fender, trim off drivers door, both headlight grille pieces, along with the driving lights and headlight bezels. price shipped to 58801. thanks, Doug

Here is what I have that is in good shape
Drivers wheel lip moulding (passenger side may be there gotta pull it out)
Drivers front fender trim
Drivers Door Trim
Drivers Headlight Bezel
Driving Lights

I took pics for you, they are attached. If you like what you see, let's figure out a price that works for both of us.

BigRed - I have you next in line if 68350 passes

ScottH & Madcow - Interior is shot - only thing good is the column and to be honest the interior is so nasty i really dont wanna lay on the floor to pull it.

C15 Sierra - Evap Housing is cracked

**68350** · 11-26-2011, 01:32 AM

Everything looks good to me, shoot me a pm with a price shipped to 58801. This is for a beater/driver so this all looks like it will work just fine. thanks

**68350** · 11-26-2011, 01:33 AM

one more thing, could you take a picture of everything when its all off just so I get everything I am after. thanks a bunch

liftlawssuck · 11-26-2011, 10:28 AM

How much for the seat belts?
Also if 68350 isn't getting them. Does the headlight bezels have the torques head screws? If so, how much for them as well?
Shipped to 01543.
Thanks, Brian

zimmstoy · 11-26-2011, 10:43 PM

seatbelts are frayed bad.

I do have a set of black ones from an 87 I can let go of for $150.

**68350** · 11-27-2011, 01:43 AM

paypal sent, added 5 for fees, hopefully thats enough. thanks

**68350** · 11-27-2011, 07:34 PM

pm sent

zimmstoy · 11-28-2011, 10:58 PM

Bigred - 68350 realized that my trim is different from what is on his truck so its available again. The drivers side was in pretty nice drivers quality condition. Most of the passenger side looks ok. Passenger fender is a little crunched and the truck is against a fence. I will drag it out this weekend and check that side for you.

BigRed76 · 11-29-2011, 09:55 PM

Quote:

Originally Posted by zimmstoy

Bigred - 68350 realized that my trim is different from what is on his truck so its available again. The drivers side was in pretty nice drivers quality condition. Most of the passenger side looks ok. Passenger fender is a little crunched and the truck is against a fence. I will drag it out this weekend and check that side for you.

Sounds good to me. If the passenger side is descent then I'll take all of the trim, but if it's pretty bad then I'll take just the driver side.
Posted via Mobile Device

zimmstoy · 11-30-2011, 12:00 AM

I will pull the truck out Saturday and let you know condition and we can figure out price.

zimmstoy · 12-03-2011, 11:36 AM

bigred -gonna be a little longer. truck is outside and we have had a bit of rain. i dont really wanna get my 1 ton stuck pulling the truck away from the fence. I will get these for you as soon as i can. I will keep you posted.

11-20-2011, 04:46 PM	#1
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	1978 swb - parts truck SWB Chevy for parts - really just want it out of the yard. 350 Engine - Good for a core 350 Turbo Transmission - Good for core 12 Bolt rear - I beleive it is a non-posi Pics tell the story. Salvage Title clear and in my name. $300 Truck is located in Cedar Park, TX just 2 Minutes north of Austin, TX. PM or call Scott 512.nine63.nine274 Attached Images __________________ Kind Regards, Scott

11-20-2011, 07:07 PM	#2
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck Need the trim off the drivers front fender, trim off drivers door, both headlight grille pieces, along with the driving lights and headlight bezels. price shipped to 58801. thanks, Doug __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-20-2011, 07:58 PM	#3
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: 1978 swb - parts truck I need all of the body trim. How is the passenger side? Posted via Mobile Device __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

11-20-2011, 08:20 PM	#4
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck add the wheel lip moulding on the drivers fender to my list as well. if you have the other three I'd take the whole set. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-20-2011, 08:25 PM	#5
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: 1978 swb - parts truck Interested in dash bezel with vents and passenger side dash trim and vents if they are in descent shape. Can you please send pics of them. If they are in good shape how much to 14222?

11-20-2011, 10:02 PM	#6
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck I will get pics of all the pieces for you all on Tuesday afternoon. That is the next time I will be near the truck in daylight. Hope that works for all of you. __________________ Kind Regards, Scott

11-21-2011, 12:00 AM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 1978 swb - parts truck what kind of shape is the dash pad in? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

11-21-2011, 12:26 AM	#8
C15_Sierra Registered User Join Date: Apr 2011 Location: Hartford CT Posts: 223	Re: 1978 swb - parts truck I could use the evaporator housing...too bad, I used to live in Austin, I could've picked it up..I used to drive thru Cedar Park all the time to go work on my truck (I kept it at my boss' shop in Liberty Hill)...thanks! __________________ -Steve 1980 GMC C15 Sierra LWB Dark Carmine Red/Carmine Int Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011) Now: 5.3/4L60E, 2.73 12-bolt open rear

11-21-2011, 07:20 AM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck sounds good to me __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-21-2011, 02:30 PM	#10
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1978 swb - parts truck What do you want for the rear end? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

11-22-2011, 10:47 PM	#11
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck Guys - its gonna be tomorrow on the pics. Sorry for the delay. aggie91 - it's gonna be $300 and the rest of the truck comes with it. I really dont wanna mess around with yanking it out and then scrapping the truck. __________________ Kind Regards, Scott

11-25-2011, 09:57 PM	#15
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck 68350 - you needed add the wheel lip moulding on the drivers fender to my list as well. if you have the other three I'd take the whole set.[/QUOTE] Need the trim off the drivers front fender, trim off drivers door, both headlight grille pieces, along with the driving lights and headlight bezels. price shipped to 58801. thanks, Doug Here is what I have that is in good shape Drivers wheel lip moulding (passenger side may be there gotta pull it out) Drivers front fender trim Drivers Door Trim Drivers Headlight Bezel Driving Lights I took pics for you, they are attached. If you like what you see, let's figure out a price that works for both of us. BigRed - I have you next in line if 68350 passes ScottH & Madcow - Interior is shot - only thing good is the column and to be honest the interior is so nasty i really dont wanna lay on the floor to pull it. C15 Sierra - Evap Housing is cracked Attached Images __________________ Kind Regards, Scott

11-26-2011, 01:32 AM	#16
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck Everything looks good to me, shoot me a pm with a price shipped to 58801. This is for a beater/driver so this all looks like it will work just fine. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-26-2011, 01:33 AM	#17
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck one more thing, could you take a picture of everything when its all off just so I get everything I am after. thanks a bunch __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-26-2011, 10:28 AM	#18
liftlawssuck Registered User Join Date: Mar 2011 Location: MA Posts: 353	Re: 1978 swb - parts truck How much for the seat belts? Also if 68350 isn't getting them. Does the headlight bezels have the torques head screws? If so, how much for them as well? Shipped to 01543. Thanks, Brian



Register or Log In To remove these advertisements.

11-26-2011, 10:43 PM	#19
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck seatbelts are frayed bad. I do have a set of black ones from an 87 I can let go of for $150. __________________ Kind Regards, Scott

11-27-2011, 01:43 AM	#20
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck paypal sent, added 5 for fees, hopefully thats enough. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-27-2011, 07:34 PM	#21
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: 1978 swb - parts truck pm sent __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

11-28-2011, 10:58 PM	#22
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck Bigred - 68350 realized that my trim is different from what is on his truck so its available again. The drivers side was in pretty nice drivers quality condition. Most of the passenger side looks ok. Passenger fender is a little crunched and the truck is against a fence. I will drag it out this weekend and check that side for you. __________________ Kind Regards, Scott

11-30-2011, 12:00 AM	#24
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck I will pull the truck out Saturday and let you know condition and we can figure out price. __________________ Kind Regards, Scott

12-03-2011, 11:36 AM	#25
zimmstoy Registered User Join Date: Feb 2008 Location: Cedar Park, TX Posts: 214	Re: 1978 swb - parts truck bigred -gonna be a little longer. truck is outside and we have had a bit of rain. i dont really wanna get my 1 ton stuck pulling the truck away from the fence. I will get these for you as soon as i can. I will keep you posted. __________________ Kind Regards, Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.