NJ Looking for aluminum intake with oil filler tube - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 12-10-2011, 11:33 PM

Looking for a sbc aluminum intake manifold with the oil filler tube in it.
Willing to buy or trade for similiar intake without filler tube, or set of new pistons on reconditioned rods.

Please post pic and price including shipping to 08753.

Thanks
Scott

doubleb's69 · 12-11-2011, 12:56 AM

Are you looking for original or any aluminum sbc intake with filler. Not mine but looks good.

http://desmoines.craigslist.org/pts/2741705953.html

**special-K** · 12-11-2011, 07:12 AM

I have a manifold like the one shown on Craigslist I want $75 for.It still has the knockout in it,but can be removed. I bought it for my 327 but am going a different route (dual carbs).

**ScottH** · 12-11-2011, 01:54 PM

Thanks but looking for a dual plane manifold.

**lolife99** · 12-11-2011, 03:12 PM

You can still buy them new.
Edelbrock makes them.
http://www.jegs.com/i/Edelbrock/350/...oductId=750760

**KSCHEVYUP** · 12-11-2011, 04:07 PM

I have a Edelbrock SP2P aluminum intake manifold.
These were designed for low and midrange torque motors; so if you have a high rpm motor you would not want this.
But if you are interested I can take some pics and figure out a price for you.
Ron

**ScottH** · 12-11-2011, 07:01 PM

Ron, isnt that a 2 barrel manifold? If its a 4 barrel, pics would be great.

thanks

**KSCHEVYUP** · 12-11-2011, 08:39 PM

Scott-
It is a 4 bbl, dual plane manifold with the oil tub hole in the front.
And in good used condition.
I will get some pics up later tonite
Ron

**KSCHEVYUP** · 12-11-2011, 10:48 PM

Pics for Scott Name: DSC02201.jpg
Views: 504
Size: 59.9 KB

Name: DSC02203.jpg
Views: 463
Size: 61.1 KB

Name: DSC02204.jpg
Views: 510
Size: 53.0 KB

It has a freeze plug in the oil tube hole now.

**ScottH** · 12-11-2011, 11:34 PM

thanks for the pics.....can u LMK how much including shipping to 08753 when u get a chance?

Scott

**KSCHEVYUP** · 12-11-2011, 11:53 PM

I was asking $75 here locally.
I will charge what shipping actually costs me.
I checked 17# on USPS web site and it shows $18.36 parcel post.
So if your interested I will box it up and take it in and weigh it and get back with you on the total.
Ron

**special-K** · 12-12-2011, 08:39 AM

I remember those. That's a great choice for practical use. The one I have is more for the high rpm range.

**ScottH** · 12-12-2011, 10:51 AM

Ron, thanks for the info. Can u give me a couple of days? I have to check on something, will let u know.

Thanks
Scott

47thriftmaster · 12-12-2011, 09:32 PM

Ron,
If ScottH ends up passing on that let me know and I'll take it off your hands. Do you still have the fill tube for it? Thanks.

**KSCHEVYUP** · 12-12-2011, 09:44 PM

47thriftmaster-
Let's give ScottH a day or so, beings he started this thread.
I never did have the oil tube in it. It has a block freeze plug in that hole.
You are 2nd in line.
Thanks
Ron

47thriftmaster · 12-12-2011, 09:52 PM

Ron,
Thanks, Yah I ment when he made a decision. No hurry, Scott can take as long as he needs. I was not trying to rush anything.

Quote:

Originally Posted by KSCHEVYUP

47thriftmaster-
Let's give ScottH a day or so, beings he started this thread.
I never did have the oil tube in it. It has a block freeze plug in that hole.
You are 2nd in line.
Thanks
Ron

**ScottH** · 12-12-2011, 11:05 PM

Ron, thanks but gonna pass on urs. Think I will wait till I can find something square bore and more of a vintage look.

Scott

**special-K** · 12-13-2011, 07:24 AM

I could be wrong,but as I recall the older manifolds would be open plenum. The SP2Ps came along as some of the first low end torque manifolds to accompany the RV cams (low end torque/hwy economy) when economy became a concern. Dual plane is newer technology.

**ScottH** · 12-15-2011, 09:16 PM

thanks to all, got one off ebay.

mahanian · 12-16-2011, 02:46 AM

If the ebay one doesn't work out let me know, I have a brand new Edelbrock Performer EPS aluminum intake with the filler tube and I special ordered it from Edelbrock to add a PCV valve to the back so I could run sealed valve covers and never worry about gasket blown by. You won't find this one in any catalog or on Edelbrock's website, they drop shipped it directly to me. The only reason I'm selling it is because I ordered the exact same manifold again in black powdercoat. I will sell it for $250 shipped and I'll throw in the PCV valve and new Edelbrock gaskets

kellytheaker · 12-16-2011, 10:14 PM

scott there is a new one on the board - edelbrock - hurry

BIGCHEVYMAN · 01-11-2012, 08:32 PM

I have a edlebrock c4b that has been sand blasted and clear coated. I am asking$60 plush shipping. I can get you a pic if you want to.

**ScottH** · 01-12-2012, 12:04 AM

I bought one on ebay but may be interested in another.
If u could post some pics that would be great.

Thanks

12-10-2011, 11:33 PM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Looking for aluminum intake with oil filler tube Looking for a sbc aluminum intake manifold with the oil filler tube in it. Willing to buy or trade for similiar intake without filler tube, or set of new pistons on reconditioned rods. Please post pic and price including shipping to 08753. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-11-2011, 12:56 AM	#2
doubleb's69 Registered User Join Date: Aug 2010 Location: Des Moines, IA Posts: 1,241	Re: Looking for aluminum intake with oil filler tube Are you looking for original or any aluminum sbc intake with filler. Not mine but looks good. http://desmoines.craigslist.org/pts/2741705953.html __________________ Bud

12-11-2011, 07:12 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looking for aluminum intake with oil filler tube I have a manifold like the one shown on Craigslist I want $75 for.It still has the knockout in it,but can be removed. I bought it for my 327 but am going a different route (dual carbs). __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-11-2011, 01:54 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube Thanks but looking for a dual plane manifold. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-11-2011, 03:12 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Looking for aluminum intake with oil filler tube You can still buy them new. Edelbrock makes them. http://www.jegs.com/i/Edelbrock/350/...oductId=750760 Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-11-2011, 04:07 PM	#6
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Looking for aluminum intake with oil filler tube I have a Edelbrock SP2P aluminum intake manifold. These were designed for low and midrange torque motors; so if you have a high rpm motor you would not want this. But if you are interested I can take some pics and figure out a price for you. Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

12-11-2011, 07:01 PM	#7
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube Ron, isnt that a 2 barrel manifold? If its a 4 barrel, pics would be great. thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-11-2011, 08:39 PM	#8
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Looking for aluminum intake with oil filler tube Scott- It is a 4 bbl, dual plane manifold with the oil tub hole in the front. And in good used condition. I will get some pics up later tonite Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

12-11-2011, 10:48 PM	#9
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Looking for aluminum intake with oil filler tube Pics for Scott It has a freeze plug in the oil tube hole now. __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

12-11-2011, 11:34 PM	#10
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube thanks for the pics.....can u LMK how much including shipping to 08753 when u get a chance? Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-11-2011, 11:53 PM	#11
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Looking for aluminum intake with oil filler tube I was asking $75 here locally. I will charge what shipping actually costs me. I checked 17# on USPS web site and it shows $18.36 parcel post. So if your interested I will box it up and take it in and weigh it and get back with you on the total. Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

12-12-2011, 08:39 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looking for aluminum intake with oil filler tube I remember those. That's a great choice for practical use. The one I have is more for the high rpm range. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-12-2011, 10:51 AM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube Ron, thanks for the info. Can u give me a couple of days? I have to check on something, will let u know. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-12-2011, 09:32 PM	#14
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: Looking for aluminum intake with oil filler tube Ron, If ScottH ends up passing on that let me know and I'll take it off your hands. Do you still have the fill tube for it? Thanks.

12-12-2011, 09:44 PM	#15
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Looking for aluminum intake with oil filler tube 47thriftmaster- Let's give ScottH a day or so, beings he started this thread. I never did have the oil tube in it. It has a block freeze plug in that hole. You are 2nd in line. Thanks Ron __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)



Register or Log In To remove these advertisements.

12-12-2011, 11:05 PM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube Ron, thanks but gonna pass on urs. Think I will wait till I can find something square bore and more of a vintage look. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-13-2011, 07:24 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Looking for aluminum intake with oil filler tube I could be wrong,but as I recall the older manifolds would be open plenum. The SP2Ps came along as some of the first low end torque manifolds to accompany the RV cams (low end torque/hwy economy) when economy became a concern. Dual plane is newer technology. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-15-2011, 09:16 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube thanks to all, got one off ebay. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-16-2011, 02:46 AM	#20
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Looking for aluminum intake with oil filler tube If the ebay one doesn't work out let me know, I have a brand new Edelbrock Performer EPS aluminum intake with the filler tube and I special ordered it from Edelbrock to add a PCV valve to the back so I could run sealed valve covers and never worry about gasket blown by. You won't find this one in any catalog or on Edelbrock's website, they drop shipped it directly to me. The only reason I'm selling it is because I ordered the exact same manifold again in black powdercoat. I will sell it for $250 shipped and I'll throw in the PCV valve and new Edelbrock gaskets __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS Last edited by mahanian; 12-16-2011 at 03:13 AM.

12-16-2011, 10:14 PM	#21
kellytheaker Registered User Join Date: Dec 2009 Location: ontario Canada Posts: 412	Re: Looking for aluminum intake with oil filler tube scott there is a new one on the board - edelbrock - hurry

01-11-2012, 08:32 PM	#22
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Looking for aluminum intake with oil filler tube I have a edlebrock c4b that has been sand blasted and clear coated. I am asking$60 plush shipping. I can get you a pic if you want to.

01-12-2012, 12:04 AM	#23
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Looking for aluminum intake with oil filler tube I bought one on ebay but may be interested in another. If u could post some pics that would be great. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.