|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-15-2011, 07:41 AM
|
#1 |
|
Senior Member
 
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,754
|
harness connection issue
Puttn a tilt coulmn in a 69 truck and the turn signal switch 1/2 moon or C style connector want mesh together like all the ones in the past have! Am I missing something here, dont want to slice and dice the connector. The coulmn is from a 72 but I thought all connectors where the same.
any imput would be helpfull as I scratch my head!lol
__________________
Things happen for a reason! |
|
|
|
12-15-2011, 05:20 PM
|
#2 |
|
Senior Member
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,754
|
Re: harness connection issue
I belive I will change out the plastic connector on the tilt column for the connector that wa on the reg.one that fit.....
__________________
Things happen for a reason! |
|
|
|
|
12-15-2011, 06:27 PM
|
#3 |
|
Active Member
Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: harness connection issue
I thought they were all the same also. Can you post a pic of the difference?
|
|
|
|
|
12-15-2011, 08:23 PM
|
#4 |
|
Registered User
Join Date: Jan 2011
Location: Acton, MA
Posts: 220
|
Re: harness connection issue
the turn signal switch for a 71-72 tilt column is different than a non-tilt 67-72. At least there are 2 different part numbers according to LMC pg 155.
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=155 I don't know what the difference is, but I'd think if you splice the old connector in to the new switch matching the wire colors you should be fine? |
|
|
|
|
12-16-2011, 09:32 AM
|
#5 |
|
Project Junkie! Fishing Poor!!
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,768
|
Re: harness connection issue
The connector should be the same. Got pictures? WES
__________________
On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys |
|
|
|
|
12-16-2011, 05:49 PM
|
#6 |
|
Senior Member
Join Date: Oct 2001
Location: Lancaster S.C.
Posts: 4,754
|
Re: harness connection issue
The connector on the tilt was different then the non tilt, so I swapped the connector out and we are in buisness!!! Thanks guy's I just needed to step back and look at this a minute!lol
__________________
Things happen for a reason! |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
