[Sound Clip] My Truck at idle :D

[TIMSPEED]

Here's what the new setup sounds like.
This is:
Hedman 1 5/8 Long Tubes -> 2¼" Y-pipe -> Stock Cat -> Flowmaster 2½" In/Out 2 Chamber 40 series Muffler, dumped just before rear axle.
This clip was taken with the camera 5' away from the muffler, at the same heighth from the ground. Enjoy!
BTW: This is in PARK @ 850rpm.
My Truck Idling

[boataddict26]

Sounds good!! Need a good cam though to give it that lopey idle!!

[TIMSPEED]

Yeah...I was gonna cam it, but for $1200 with a 4 year/45k mile warranty..I just couldn't pass it up! If I bring the idle down to 600rpm, it's got a more noticeable lope.

[boataddict26]

Do you have any pics.?

[gldevall]

Sounds good. I need to get mine on here. But I cannot get ny dam camcorder to load into my computer.

[BaggedC10]

TIMSPEED---Where did you purchase that motor and how much? If you don't mind me asking...???

[TIMSPEED]

Daniel,
I got it from Rettig Bros., Here in Modesto. I paid I think $1500 up front (cuz I wanted them to put the oil pan and timing chain cover on for me), and then I got back $200, because my crank was TOAST and one of my heads was cracked. But I think if you just went in and had NO core (cuz you have a 305, and you're going to a 355cid), and you can put the timing chain cover and oil pan on yourself, it'd be like $1200 out the door. It's guranteed for 4 year/45k mile. The first year is 100% parts AND labor (meaning I'd just bring the entire vehicle to them and then they'd fix it)
But to get this warranty, you must have:
Brand New Water Pump, Radiator, Belts, Hoses, etc. So...I say it was a good deal. It's got a SMALL cam in it. They said with my setup, I should make 225rwhp, so...in a 3800# truck, that should work out nicely.

[79BIG10]

Here's mine. Make sure to turn down because it gets revved up Exhaust MP3 I did this awhile back and had my truck backed up to the window where the mic was. This is dual 40 series chamber Flowmasters with X pipe dumped under the bed before the axle and idling at 600RPM then up the power band as you will hear.

Since hearing LOHRTBT's truck with Aerochambers dumped I want those now. For the right price I'd sell these Flowmasters and get the Aero's

[84Stepper]

Whats the deal with these aero chambers? Everyone is saying how much better they are than flows. I dont think they sound any different than 40 series flows. I guess I just need to hear them in real life. Hopefully I will on may 10th.

[BaggedC10]

Originally posted by TIMSPEED
Daniel,
I got it from Rettig Bros., Here in Modesto. I paid I think $1500 up front (cuz I wanted them to put the oil pan and timing chain cover on for me), and then I got back $200, because my crank was TOAST and one of my heads was cracked. But I think if you just went in and had NO core (cuz you have a 305, and you're going to a 355cid), and you can put the timing chain cover and oil pan on yourself, it'd be like $1200 out the door. It's guranteed for 4 year/45k mile. The first year is 100% parts AND labor (meaning I'd just bring the entire vehicle to them and then they'd fix it)
But to get this warranty, you must have:
Brand New Water Pump, Radiator, Belts, Hoses, etc. So...I say it was a good deal. It's got a SMALL cam in it. They said with my setup, I should make 225rwhp, so...in a 3800# truck, that should work out nicely.

Thanks for the information. I may be purchasing a crate motor soon, so keep that place in mind for me.