|
01-30-2012, 12:11 AM
|
#1 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Height of body mounts
What's the height of front middle and back and core support mounts ?
Posted via Mobile Device |
|
|
|
01-31-2012, 07:57 PM
|
#2 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
Can anyone measure them for me ? Thanks ?
Posted via Mobile Device |
|
|
|
|
02-03-2012, 06:08 AM
|
#3 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
Can someone take like 10 min to go measure the middle sections and front rear of the body mounts on there blazer ?
All body mounts THANKS !! Posted via Mobile Device |
|
|
|
|
02-04-2012, 07:37 AM
|
#4 | |
|
Registered User
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
|
Re: Height of body mounts
Quote:
|
|
|
|
|
|
02-04-2012, 02:26 PM
|
#5 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
The height as if all mounts were standing on a table from the top to bottom .
The height from body to frame . Posted via Mobile Device |
|
|
|
|
02-04-2012, 09:16 PM
|
#6 |
|
Registered User
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
|
Re: Height of body mounts
mine average 3/4 to 1 1/4 inches from body to frame, but they are old and need to be replaced. the radiator support mounts are only about 1/2inch but the rubber bushing is rotted to the point of non existance. that is also compressed thickness on all of them, if you are looking at material to replace them with you will need to take that into account.
|
|
|
|
|
02-04-2012, 09:18 PM
|
#7 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
What about the middle body mount
Posted via Mobile Device |
|
|
|
|
02-06-2012, 01:05 AM
|
#8 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
 Posted via Mobile Device |
|
|
|
|
02-06-2012, 01:23 AM
|
#9 |
|
Registered User
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
|
Re: Height of body mounts
i just remembered the body mounts are different heights depending on year model. what year is yours? and did you cut the crossmember?
|
|
|
|
|
02-06-2012, 01:36 AM
|
#10 |
|
Registered User
Join Date: Oct 2011
Location: Louisiana
Posts: 23
|
Re: Height of body mounts
Yes I cut mine for a wishbone link and driveshaft .
Mine is a 76 . Posted via Mobile Device |
|
|
|
|
02-06-2012, 01:49 AM
|
#11 |
|
Registered User
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
|
Re: Height of body mounts
the measurement on mine would be different then. i have an 82. 73-76 should be the same. you might have better luck contacting a distributor and asking. i do see from the lmc catalog diagram that year and position is probably about 2 to 3 inches http://www.lmctruck.com/icatalog/csb/full.aspx?Page=36
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
