Should harness seatbelts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TigerDMD · 02-08-2012, 10:19 AM

Is there a factory location for shoulder harness seatbelts or do I have to drill a hole. My truck is at the body shop so I cant walk out and look at it.
Thanks,

PanelDeland · 02-08-2012, 10:43 AM

There should be a couple spots for the factory shoulder belts on either side of the cab.They are in the rear corners of the upper part of the cab.Some are covered with factory plugs made of plastic

TigerDMD · 02-08-2012, 10:47 AM

If i pull the plug out - is it threaded behind it for a bolt?

Quote:

Originally Posted by PanelDeland

There should be a couple spots for the factory shoulder belts on either side of the cab.They are in the rear corners of the upper part of the cab.Some are covered with factory plugs made of plastic

Sammy · 02-08-2012, 10:52 AM

Should be a plastic plug in the cab for that shoulder upper belt. So no drilling should be in order. (threaded)
A question I would like answered is if shoulder belts from other years will mount correctly in that location without modifications. Like S-10's or blazers etc. Since reproduction to fit our trucks are so costly.

02-08-2012, 10:19 AM	#1
TigerDMD Registered User Join Date: Feb 2011 Location: Laurens, SC Posts: 182	Should harness seatbelts Is there a factory location for shoulder harness seatbelts or do I have to drill a hole. My truck is at the body shop so I cant walk out and look at it. Thanks,

02-08-2012, 10:43 AM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Should harness seatbelts There should be a couple spots for the factory shoulder belts on either side of the cab.They are in the rear corners of the upper part of the cab.Some are covered with factory plugs made of plastic __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

02-08-2012, 10:52 AM	#4
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Should harness seatbelts Should be a plastic plug in the cab for that shoulder upper belt. So no drilling should be in order. (threaded) A question I would like answered is if shoulder belts from other years will mount correctly in that location without modifications. Like S-10's or blazers etc. Since reproduction to fit our trucks are so costly. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629" Last edited by Sammy; 02-08-2012 at 10:53 AM. Reason: !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.