TH350 shift linkage question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ColoradoC10 · 02-20-2012, 11:03 AM

I am building a new exhaust system for my 69 long bed. Does anyone make an aftermarket shift linkage that deletes the bracket that mounts to the frame? Or can I remove it and use the stock linkage? It would make a lot more clearance for my exhaust if I can do that.

Thanks for any help you can give me.

Lee H · 02-20-2012, 11:26 AM

Someone has done that mod and posted picks. Might try a search. I'll poke around and see if I can find it.
Posted via Mobile Device

Livrat · 02-20-2012, 12:40 PM

I have used this setup in many different cars/truck
http://www.summitracing.com/parts/LOK-ACA-1800/

**Tim Christian** · 02-20-2012, 02:13 PM

LOKAR makes one.

ColoradoC10 · 02-20-2012, 02:39 PM

Livrat, did that fit the stock chevy column with the TH350? Looks just like what I am looking for, thanks.

hgs_notes · 02-20-2012, 02:44 PM

It's the same one I used. I had to make a small bend in the rod to get rid of some binding, but works great and was easy to istall.

ColoradoC10 · 02-20-2012, 02:52 PM

Thanks, just ordered it. Thanks all for the info.

02-20-2012, 11:03 AM	#1
ColoradoC10 Registered User Join Date: Dec 2011 Location: Denver area Posts: 22	TH350 shift linkage question I am building a new exhaust system for my 69 long bed. Does anyone make an aftermarket shift linkage that deletes the bracket that mounts to the frame? Or can I remove it and use the stock linkage? It would make a lot more clearance for my exhaust if I can do that. Thanks for any help you can give me. __________________ 1966 C10 short step bagged 383

02-20-2012, 11:26 AM	#2
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,143	Re: TH350 shift linkage question Someone has done that mod and posted picks. Might try a search. I'll poke around and see if I can find it. Posted via Mobile Device __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

02-20-2012, 12:40 PM	#3
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: TH350 shift linkage question I have used this setup in many different cars/truck http://www.summitracing.com/parts/LOK-ACA-1800/

02-20-2012, 02:13 PM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: TH350 shift linkage question LOKAR makes one.

02-20-2012, 02:39 PM	#5
ColoradoC10 Registered User Join Date: Dec 2011 Location: Denver area Posts: 22	Re: TH350 shift linkage question Livrat, did that fit the stock chevy column with the TH350? Looks just like what I am looking for, thanks. __________________ 1966 C10 short step bagged 383

02-20-2012, 02:44 PM	#6
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: TH350 shift linkage question It's the same one I used. I had to make a small bend in the rod to get rid of some binding, but works great and was easy to istall. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-20-2012, 02:52 PM	#7
ColoradoC10 Registered User Join Date: Dec 2011 Location: Denver area Posts: 22	Re: TH350 shift linkage question Thanks, just ordered it. Thanks all for the info. __________________ 1966 C10 short step bagged 383

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.