I wanna drop the front

[motornut]

from what i read
2" drop seems less work then 3"
anybody do a drop on the front and leave the rear alone?

[droppedgmc]

with this truck I think it would look ok with just a 2" front drop. The rear looks like it is sagging anyway. it would get rid of your " cali lean" lol

[Pop's C-10]

To me, blazer always look lower in tha front..2 (via 1 cut coil) should be enough, unless you going to pop for 3 in spindles

[nibs]

Dont cheap your way out by cutting coils... Do it the right way man!

[motornut]

not gona cut coils(corners)
i like them lower in front,like droppin a V8 on worn V6 coils "look",
tires stuffed up in front,but hated hittin bottom
what i've read 3 involves cutting some "bits".... or rubbing lol
as for the back....new stock leafs sometime

[N2TRUX]

If done properly with minimal heat cutting coils is a very good way to get the front down on a budget. I suggest cut a half coil if your apprehensive and go from there. You can do a lowering shackle in the rear, but you will have to mod your gas filler tube.