couple of progress pics.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 05-02-2003, 08:58 PM

The 67/68/72 is coming along.
Got the rearend out and took it to the shop to have it rebuilt with posi, 3.73's, new axles, etc.
Trailing arms are at my buddy's shop getting the ECE stiffening braces welded on.
Slid the bed up to the front so I can EZ-OFF, wash the rear of the frame then paint with POR-15 and ChassisBlack - will do this weekend if it doesn't rain.
I've got the 4/6 ECE drop kit sitting in the garage ready to go in as soon as the rearend's ready - a couple of weeks?
I'll get the rear done first then move the bed back and clean/paint,rebuild/drop the front end.
The 454's sitting in the garage just waiting

superchevy · 05-02-2003, 08:59 PM

pic2

*Randy70C-10* · 05-02-2003, 09:46 PM

Wow, that sure looks like a solid bed!

chevykid1969 · 05-02-2003, 10:04 PM

Looks Great!!!

griesel72 · 05-02-2003, 10:19 PM

Nice, where do you find time to get it all done, i've been working on my 69 since september and am just now spraying primer.

david

SCOTI · 05-02-2003, 10:41 PM

SC, your not neglecting the SSsprint are you?

superchevy · 05-02-2003, 11:13 PM

The Sprints are in storage waiting for full factory correct restorations. I needed a toy to build, so I picked up the 68 CST longbed (great cab and front clip), the 72 shorty chassis, and the 67 stepside bed. Now I've got something I can work on and not have to worry about it being "factory correct".
Just going to build a nice Saturday night cruiser. Trying to keep it cheap, but you know how it goes....
SC

Crank · 05-03-2003, 01:45 AM

We want pics of the BB going into the truck. Many pics!!!
Brandon

Iron-Butt · 05-03-2003, 02:36 AM

good start

72addict · 05-04-2003, 01:56 AM

Could you tell me what the heights (free state) are on the 4/6 springs you have in your new kit? Is the kit for the bb motor? Wondering if the sizes are anything close to stock springs from another application. Thanks

05-02-2003, 08:58 PM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	couple of progress pics.... The 67/68/72 is coming along. Got the rearend out and took it to the shop to have it rebuilt with posi, 3.73's, new axles, etc. Trailing arms are at my buddy's shop getting the ECE stiffening braces welded on. Slid the bed up to the front so I can EZ-OFF, wash the rear of the frame then paint with POR-15 and ChassisBlack - will do this weekend if it doesn't rain. I've got the 4/6 ECE drop kit sitting in the garage ready to go in as soon as the rearend's ready - a couple of weeks? I'll get the rear done first then move the bed back and clean/paint,rebuild/drop the front end. The 454's sitting in the garage just waiting Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-02-2003, 08:59 PM	#2
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	pic2 Attached Images __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-02-2003, 10:19 PM	#5
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Nice, where do you find time to get it all done, i've been working on my 69 since september and am just now spraying primer. david __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-02-2003, 10:41 PM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	SC, your not neglecting the SSsprint are you? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-02-2003, 11:13 PM	#7
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	The Sprints are in storage waiting for full factory correct restorations. I needed a toy to build, so I picked up the 68 CST longbed (great cab and front clip), the 72 shorty chassis, and the 67 stepside bed. Now I've got something I can work on and not have to worry about it being "factory correct". Just going to build a nice Saturday night cruiser. Trying to keep it cheap, but you know how it goes.... SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

05-02-2003, 09:46 PM	#3
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Wow, that sure looks like a solid bed!

05-02-2003, 10:04 PM	#4
chevykid1969 Registered User Join Date: Apr 2003 Location: Knightdale,North Carolina Posts: 377	Looks Great!!!

05-03-2003, 01:45 AM	#8
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	We want pics of the BB going into the truck. Many pics!!! Brandon

05-03-2003, 02:36 AM	#9
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	good start __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

05-04-2003, 01:56 AM	#10
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	Could you tell me what the heights (free state) are on the 4/6 springs you have in your new kit? Is the kit for the bb motor? Wondering if the sizes are anything close to stock springs from another application. Thanks __________________ 1957 Cameo

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.