B&m Light Truck Megashifter

[355bullet]

Just installed it couple of weeks ago, works great!

['79squared]

Cant decide if I want one only because I dont like how tall the box is. But they are cool.

[Pop's C-10]

nice

[INSIDIOUS '86]

Not my first choice of shifters but I'm glad to see it works in our trucks. I thought s10 were more what they were geared for hence "light truck". I use lokar in mine direct mount to the trans for a 4on the floor look and a nice right hand rattle
Posted via Mobile Device

[Low84]

Originally Posted by INSIDIOUS '86

Not my first choice of shifters but I'm glad to see it works in our trucks. I thought s10 were more what they were geared for hence "light truck". I use lokar in mine direct mount to the trans for a 4on the floor look and a nice right hand rattle
Posted via Mobile Device

any pics?

[INSIDIOUS '86]

I will try and get some tomarow and start a thread.
Only problem with lokar is the shifters do not have reverse lockout
Posted via Mobile Device

[hotrodimpy]

Insidious 86 ALL Lokar shifters have reverse lockout. Our shifters are designed to stop in the netrual position when it is moving from any of the selectable gears. If you are not stopping in netrual when going to the park position from 1,2,D or OD there is most likely an adjustment issue. Please contact our tech department toll free at 1-877-469-7440
We will be happy to try and work with you in trying to get the adjustment worked out.
Thank you John

[bigsj]

Originally Posted by 355bullet

Just installed it couple of weeks ago, works great!

what did that shifter coast i have been thinking about getting one.

[Stepper562]

Originally Posted by hotrodimpy

Insidious 86 ALL Lokar shifters have reverse lockout. Our shifters are designed to stop in the netrual position when it is moving from any of the selectable gears. If you are not stopping in netrual when going to the park position from 1,2,D or OD there is most likely an adjustment issue. Please contact our tech department toll free at 1-877-469-7440
We will be happy to try and work with you in trying to get the adjustment worked out.
Thank you John

I second that...adjustment issue. I just installed a 16' on my th400. On the first test drive there was no lock out then I fiddled with the knob and lock out cable and voila...100%. Give them a ring, they'll walk you through. Great service.
Posted via Mobile Device

[355bullet]

Thanks guys!
Shifter runs about 200bucks from summit racing.com

Lokar has nice shifters also,but i wanted this look.

Only difference in the mega shifter and the light weight truck shifter is the longer cover. And this shifter has adjustable plates to raise or lower the shifter.

[INSIDIOUS '86]

Originally Posted by hotrodimpy

Insidious 86 ALL Lokar shifters have reverse lockout. Our shifters are designed to stop in the netrual position when it is moving from any of the selectable gears. If you are not stopping in netrual when going to the park position from 1,2,D or OD there is most likely an adjustment issue. Please contact our tech department toll free at 1-877-469-7440
We will be happy to try and work with you in trying to get the adjustment worked out.
Thank you John

My only issue is yes this works but r/n are very short I would rather have a reverse lock not a nuetral lock. Great shifter and I really like it but it isn't so great for a street strip vehicle
Posted via Mobile Device

[77c10]

I had a Lokar double bend trans mount shifter in my truck that the PO installed. I took out the buckets and installed a bench seat. After that the shifter would hit the seat when trying to go into 1st gear. I bought a light truck Megashfiter at a swap meet brand new for $175.00 out the door. Put my Lokar on Ebay and it sold for nearly $190.00. I was very pleased with that aspect of it. Only thing I did not care for was the PO cut a hugh hole in the floor to mount the Lokar shifter.

[INSIDIOUS '86]

[red rumbler]

how was the hookup? i have it just waiting to put it in.possible steps you took????

[INSIDIOUS '86]

You talking about the b&m or the lokar?
Posted via Mobile Device

[red rumbler]

sorry b&m also how long did it take?

[ProStreet83C10]

ive seen some VERY scary stuff happen with the B&M Megashifter and refuse to run one. however, if it works for you thats all that matters.

[355bullet]

The B&M mega shifter has been on my nova for over ten years never have had an issue with it.

[355bullet]

Couple pics i took when I installed it. Took couple of hours.
Its a tight fit because of the stock 4x4 shifter cover.
I wanted to keep it so I notch the other cover to clear it






I'll take another on of the cover tomorrow, i didn't realize the cable was covering it.

[355bullet]

Originally Posted by INSIDIOUS '86

Dude! that looks kick ass!

['79squared]

Lokar looks cool also. But seems like it would be easy to over shift when running it hard up through the gears?

[ivorton74]

looks pretty cool. i have a b&m hammer shifter im about to have installed in my truck. only issue is it seems to be kinda short...i mocked it up yesterday and i have to reach down to grab it. i was thinking maybe i can make a bracket to bring it up a bit so i can reach it.

[355bullet]

Originally Posted by ivorton74

looks pretty cool. i have a b&m hammer shifter im about to have installed in my truck. only issue is it seems to be kinda short...i mocked it up yesterday and i have to reach down to grab it. i was thinking maybe i can make a bracket to bring it up a bit so i can reach it.

Call B&M and ask if the adjustment brackets from the truck mega shifter will work. That way you can raise it.

[red rumbler]

Originally Posted by 355bullet

Couple pics i took when I installed it. Took couple of hours.
Its a tight fit because of the stock 4x4 shifter cover.
I wanted to keep it so I notch the other cover to clear it






I'll take another on of the cover tomorrow, i didn't realize the cable was covering it.

did you cut a fifth hole in the middle to run the shifter through? and did you hook wires up to the switches for reverse lights and safety switch? if so how was that and what did you do? sorry for all the questions i just dont want to tear my truck apart learning how to and how not to by screwing it up

[355bullet]

yeah, you have to drill out one hole for the shifter cable. I didnt get pics of that thou. As for the switches i was in a rush to put it back together. I need to go back and trace for those wires to hook up.
The instructions are simple and straight foward. You should be fine.