![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2006
Location: Littlestown, PA
Posts: 51
|
Emergency Brakes
I am build an ad truck. I was wondering if you guy are running emergency brakes. If so what different brake handles are you using.
Thanks, Jason |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Mar 2012
Location: NPR florida
Posts: 28
|
Re: Emergency Brakes
I like the stock one. looks cool!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2011
Location: maine
Posts: 152
|
Re: Emergency Brakes
I'm building a 57 3100 and the old brake handle was in the way so I removed it. I also need a solution to the e-brake.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2009
Location: Ansonia, CT
Posts: 91
|
Re: Emergency Brakes
I'm in the middle of installing a MII front suspension (TCI) in my '56 and as of yet don't know what I'm doing about an E-brake either.
I would like to keep the OEM brake lever under the dash, does anyone know of a cable arrangement that will replace the OEM bell crank and rod arrangement? justplain ray |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2010
Location: Asheville, NC
Posts: 291
|
Re: Emergency Brakes
I'm going to used a late 90's Honda e-brake handle assembly. I'm running rear disc and a S10 bench so I have room beside the seat between the door and seat. I've seen several this way and it makes a nice set up.
__________________
My build project http://67-72chevytrucks.com/vboard/s...=1#post4158671 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2011
Location: Redondo Beach, CA
Posts: 129
|
Re: Emergency Brakes
Im having the same dilemma. I have a disc brake conversion on the rear and I dont have the little "arm" that activates the parking brake. This part is impossible to find without buying a while new caliper. If any one had this Id be glad to pay you for it.
![]() Then I started thinking of some type of Line Lock setup with a valve but that would keep the hydraulics pressured for an extended period of time. What do you think about that?
__________________
52 Chevy 3100 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2012
Location: Central Missouri
Posts: 155
|
Re: Emergency Brakes
I am using a Lokar e-brake kit, mounted to the right of the Lokar shifter - it is a bit of a reach but works for me.
http://www.lokar.com/product-pgs/eme...handbrake.html in hindsight, this would probably be better for my truck - less of a reach - http://www.lokar.com/product-pgs/eme...handbrake.html Shifter - http://www.summitracing.com/parts/LO...FQFgTAodT1d-wA |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,641
|
Re: Emergency Brakes
Here's how I did mine using the stock handle. I converted it using cables and parts from Control Cable company. www.controlcable.com They are great folks to work with. I only had to fab a "hat" to hold the cable end at the firewall and modify the original pull rod a little. I could have used the original cables that came with my twelve bolt rear but I decided to just replace everthing while I was doing it. You can call Control Cables and they will fax or mail you a form that you put your measurements on and send back. They will make the cables per your measurements and specifications. Total cost was almost $175 so you might do it cheaper with junkyard parts but I wanted all new stuff.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2009
Location: Ansonia, CT
Posts: 91
|
Re: Emergency Brakes
THANK YOU RUSSELL.
THAT IS EXACTLY WHAT I WAS LOOKING FOR. justplainray |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Nov 2011
Location: Langley, BC
Posts: 702
|
Re: Emergency Brakes
I remember seeing a mini rotor and caliper that mounts on the pinion shaft. You could use about any E-brake handle with it. Don't know if it's any good though.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Nov 2006
Location: Littlestown, PA
Posts: 51
|
Re: Emergency Brakes
Thanks for some info guys.
|
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Mar 2009
Location: Derby Kansas
Posts: 564
|
Re: Emergency Brakes
Quote:
__________________
av8tr33337 AKA Bartman ![]() Bartman's Ad-S10 Chassis Swap http://67-72chevytrucks.com/vboard/s...d.php?t=415418 My First Youtube Video http://www.youtube.com/watch?v=B6hSt...eature=channel More Pics of the 51 Project http://s668.photobucket.com/albums/v...hassis%20Swap/ 1951 3100 Pickup |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Mar 2008
Location: Cali.
Posts: 958
|
Re: Emergency Brakes
I used the stock brake handle as a exhaust cutout lever. Could be used as E-breaks to.
![]() ![]()
__________________
My build, 53 GMC / S10 swap http://67-72chevytrucks.com/vboard/s...d.php?t=305723 My build, 59 Chevy / 88 fullsize swap http://67-72chevytrucks.com/vboard/s...hlight=sgtusmc U.S. Marines - Certified Counselors to the 72 Virgins Dating Club. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|