Bench seat question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c50rob · 03-23-2012, 10:59 PM

Requesting information on the bench seat slider mechanism, when I bought the truck a little over two years ago the seat was sliding freely back and forth and not locking in place. At the time I was taking truck apart and not a big deal, now that truck is going back together does anybody have any pictures or advice? Basically all I have is slider handle connected to a rod going to the passenger side, seems like there should be a spring or springs for tension. Does anyone have any idea if something missing?

litew8 · 03-23-2012, 11:13 PM

Yes, there should be a spring on the driver's side.

**LockDoc** · 03-24-2012, 12:59 AM

-
I posted some pictures in this thread. It may not be exactly the same but maybe it will give you an idea.

http://67-72chevytrucks.com/vboard/s...d.php?t=418802

I also posted pictures of a couple of different years in this thread...

http://67-72chevytrucks.com/vboard/s...d.php?t=287988

LockDoc

c50rob · 03-24-2012, 11:12 AM

Thanks for pictures, missing some springs. Guess I need to stop by TSC or ACE.

57larry · 03-24-2012, 01:52 PM

I'm still trying to find the wingnut to make my seat tilt forward

03-23-2012, 10:59 PM	#1
c50rob Registered User Join Date: Feb 2010 Location: ELIZABETH CITY Posts: 87	Bench seat question Requesting information on the bench seat slider mechanism, when I bought the truck a little over two years ago the seat was sliding freely back and forth and not locking in place. At the time I was taking truck apart and not a big deal, now that truck is going back together does anybody have any pictures or advice? Basically all I have is slider handle connected to a rod going to the passenger side, seems like there should be a spring or springs for tension. Does anyone have any idea if something missing?

03-23-2012, 11:13 PM	#2
litew8 Registered User Join Date: Jul 2011 Location: Des Moines, Iowa Posts: 3,016	Re: Bench seat question Yes, there should be a spring on the driver's side. __________________ project: "my happy mess"

03-24-2012, 12:59 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,772	Re: Bench seat question - I posted some pictures in this thread. It may not be exactly the same but maybe it will give you an idea. http://67-72chevytrucks.com/vboard/s...d.php?t=418802 I also posted pictures of a couple of different years in this thread... http://67-72chevytrucks.com/vboard/s...d.php?t=287988 LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 03-24-2012 at 01:09 AM.

03-24-2012, 11:12 AM	#4
c50rob Registered User Join Date: Feb 2010 Location: ELIZABETH CITY Posts: 87	Re: Bench seat question Thanks for pictures, missing some springs. Guess I need to stop by TSC or ACE.

03-24-2012, 01:52 PM	#5
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: Bench seat question I'm still trying to find the wingnut to make my seat tilt forward

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.