CA 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sighlurr · 03-26-2012, 02:12 PM

This rearend just came out of my daily driver, and has absolutely no issues. Rear brakes are great, and is complete with all cables, brackets, etc. Both rear brake emergency cables are still intact and neither are cut. This is a factory posi rearend with 3.08 gears. This thing was great on the freeway - 75mph with no guilt! This is the wider of both rearends from 67-72 at 58" from back plate to backing plate. 6 lug axles and came out of a leaf spring 1/2 ton truck.

$350. OBO. Call or text 925 979.8161

Local pickup only. I do not have a truck that runs right now, and cannot deliver or meet you anywhere. As always, first come, first serve - I need the space back.

67 1967 68 1968 69 1969 70 1970 71 1971 72 1972 67-72 1967-1972 Chevrolet GMC

Mr.C · 03-27-2012, 12:55 AM

Would you sell just the posi
Posted via Mobile Device

sighlurr · 03-27-2012, 03:39 AM

No sorry, I need the whole rear end gone.

Quote:

Originally Posted by Mr.C

Would you sell just the posi
Posted via Mobile Device

Posted via Mobile Device

sighlurr · 03-27-2012, 11:58 AM

Dropping to $350. I'll also include an original behind the seat, in cab gas tank that came out of my daily driver.

c1069 · 03-27-2012, 01:12 PM

It was working very well! No noise?
Posted via Mobile Device

c1069 · 03-27-2012, 01:15 PM

Is the same length as 71? Will work with my five lugs axle?
Posted via Mobile Device

**michael bustamante** · 03-27-2012, 02:04 PM

I THINK IT WILL ACCEPT THE 5 LUG AXLES. i HAVE THE SAME REAREND AND I PUT 5 LUGGERS ON MINE

HotRod C/10 · 03-27-2012, 02:40 PM

I so need 5 lugger rearend!

c1069 · 03-27-2012, 02:55 PM

Mine is 3.08 too the only difference your if for leaf and mine is for cool springs
Posted via Mobile Device

sighlurr · 03-27-2012, 02:57 PM

Quote:

Originally Posted by c1069

It was working very well! No noise?
Posted via Mobile Device

This thing is perfect. Actually had new wheel cylinders last year on both sides. Not a noise from it.

I'm going Porterbuilt coilover conversion, disc brakes and needed 5 lugs with the wheels I want. It was easier to start with a '71 5 lug coil rearend than convert this one.

Quote:

Originally Posted by c1069

Is the same length as 71? Will work with my five lugs axle?
Posted via Mobile Device

It's the same width as 71-72, not sure about the 5 lug axles.

sighlurr · 03-27-2012, 02:58 PM

Quote:

Originally Posted by DSALRAM

I so need 5 lugger rearend!

Sorry, this is 6 lug as it's a '70.

**Classic Bowties** · 03-27-2012, 03:11 PM

Quote:

Originally Posted by dsigh

It was easier to start with a '71 5 lug coil rearend than convert this one.

It's the same width as 71-72, not sure about the 5 lug axles.

Yes, if its the wider 70-72 12 bolt housing as you have indicated in post #1 & #10, you can slide the OE 12 bolt 5 on 5 inch lug pattern axles right into this posi rear. Should be no more than a two/three beer weekend job, that is unless you end up having a helper or two over

. Mel

c1069 · 03-27-2012, 04:33 PM

Thanks Mel
Posted via Mobile Device

jjtackleberry · 03-27-2012, 09:26 PM

If you decide to ship and part, I would like to be inline for the posi.

Thank you
Jace

sighlurr · 03-28-2012, 06:06 PM

May consider a partial trade for a clean (no rust or bondo) and functioning driver's door and 2 15x7 steel 6 lug wheels.

**special-K** · 03-29-2012, 07:20 AM

It took me 6 beers to swap the last set...but I was on my fifth when I grabbed the first tool

This is great for most GMC owners and still worth it for anyone else!

kriswvu1202 · 03-30-2012, 05:22 AM

I would take this if you could ship.

sighlurr · 03-30-2012, 11:47 AM

Quote:

Originally Posted by kriswvu1202

I would take this if you could ship.

I'm not parting this out, but feel free to PM heavymetalchevy for a shipping quote on the complete rearend.

HotRod C/10 · 03-30-2012, 01:08 PM

Quote:

Originally Posted by michael bustamante

I THINK IT WILL ACCEPT THE 5 LUG AXLES. i HAVE THE SAME REAREND AND I PUT 5 LUGGERS ON MINE

Mike what axles did you go with?

kriswvu1202 · 03-31-2012, 06:35 AM

PM sent to HeavyMetal. I'll let you know as soon as I hear something back.

shawno72 · 03-31-2012, 01:15 PM

I will take it and pick it up. Pm sent.

sighlurr · 03-31-2012, 02:38 PM

Sale pending with Shawn...

Quote:

Originally Posted by shawno72

I will take it and pick it up. Pm sent.

sighlurr · 03-31-2012, 09:44 PM

Sold and gone.

shawno72 · 03-31-2012, 11:45 PM

Thanks Devin. It was a pleasure to meet you.
Posted via Mobile Device

03-27-2012, 12:55 AM	#2
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Would you sell just the posi Posted via Mobile Device __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

03-27-2012, 11:58 AM	#4
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Dropping to $350. I'll also include an original behind the seat, in cab gas tank that came out of my daily driver.

03-27-2012, 01:12 PM	#5
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend It was working very well! No noise? Posted via Mobile Device __________________ Pancho 69 c/10 step side 454/400 with 3.07

03-27-2012, 01:15 PM	#6
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Is the same length as 71? Will work with my five lugs axle? Posted via Mobile Device __________________ Pancho 69 c/10 step side 454/400 with 3.07 Last edited by c1069; 03-27-2012 at 02:09 PM.

03-27-2012, 02:04 PM	#7
michael bustamante Registered User Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,843	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend I THINK IT WILL ACCEPT THE 5 LUG AXLES. i HAVE THE SAME REAREND AND I PUT 5 LUGGERS ON MINE __________________ 1967custom

03-26-2012, 02:12 PM	#1
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend This rearend just came out of my daily driver, and has absolutely no issues. Rear brakes are great, and is complete with all cables, brackets, etc. Both rear brake emergency cables are still intact and neither are cut. This is a factory posi rearend with 3.08 gears. This thing was great on the freeway - 75mph with no guilt! This is the wider of both rearends from 67-72 at 58" from back plate to backing plate. 6 lug axles and came out of a leaf spring 1/2 ton truck. $350. OBO. Call or text 925 979.8161 Local pickup only. I do not have a truck that runs right now, and cannot deliver or meet you anywhere. As always, first come, first serve - I need the space back. 67 1967 68 1968 69 1969 70 1970 71 1971 72 1972 67-72 1967-1972 Chevrolet GMC Attached Images Last edited by sighlurr; 03-27-2012 at 11:58 AM.

03-27-2012, 02:40 PM	#8
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend I so need 5 lugger rearend! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

03-27-2012, 02:55 PM	#9
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Mine is 3.08 too the only difference your if for leaf and mine is for cool springs Posted via Mobile Device __________________ Pancho 69 c/10 step side 454/400 with 3.07

03-27-2012, 04:33 PM	#13
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Thanks Mel Posted via Mobile Device __________________ Pancho 69 c/10 step side 454/400 with 3.07

03-27-2012, 09:26 PM	#14
jjtackleberry Registered User Join Date: Feb 2011 Location: kansas Posts: 306	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend If you decide to ship and part, I would like to be inline for the posi. Thank you Jace __________________ '71 Chevy LWB all OG '86 Chevy LWB all OG It's all a matter of perception

03-28-2012, 06:06 PM	#15
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend May consider a partial trade for a clean (no rust or bondo) and functioning driver's door and 2 15x7 steel 6 lug wheels.

03-29-2012, 07:20 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend It took me 6 beers to swap the last set...but I was on my fifth when I grabbed the first tool This is great for most GMC owners and still worth it for anyone else! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-30-2012, 05:22 AM	#17
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend I would take this if you could ship. __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

03-31-2012, 06:35 AM	#20
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend PM sent to HeavyMetal. I'll let you know as soon as I hear something back. __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

03-31-2012, 01:15 PM	#21
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend I will take it and pick it up. Pm sent. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

03-31-2012, 09:44 PM	#23
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Sold and gone.

03-31-2012, 11:45 PM	#24
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1970 Chevy C10 Factory 12 Bolt Posi Leaf Rearend Thanks Devin. It was a pleasure to meet you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.