66 steps with brackets for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 05-06-2003, 08:15 AM

Pair of steps for sale, very straight with attaching brackets.

$25 plus shipping from 49512.

Here is a pic of top sides. Will post pic of bottom in separate post.

Jim jimkemp@iserv.net

JimKshortstep4x4 · 05-06-2003, 08:49 AM

Pic of bottom of steps.

truckman32 · 05-06-2003, 10:29 PM

will they work on a short wheelbase how much would it be to ship them to 40353,also do you have the bed fenders

JimKshortstep4x4 · 05-07-2003, 01:05 PM

Truckman,

The steps came off of a shortbed.

Shipping costs, (UPS Ground) is $22.

We only have the right fender and it has some rust damage, but it could be fixed. If you buy the steps, you can have the fender for the shipping costs. I can take a pic of it if you have an interest.

Jim

Rod · 05-09-2003, 12:06 PM

Would those work and or be correct on a 67-72 step short box?

JimKshortstep4x4 · 05-09-2003, 01:29 PM

Rod,

I am pretty sure that the appearance is different. I will take a pic of the two years together and post it. They may work but they may look different.

They almost have to bolt up the same since the sides are the same. The curvature of the fender might be different but I can check that.

Jim

JimKshortstep4x4 · 05-09-2003, 09:02 PM

Rod,

The steps can be made to work, but the appearance is different.
Here is a pic with the 66 beside the 67-72 step. It looks like the step will bolt to the bedside with no problem and bolt to the fender with the drilling of a couple of holes.

I also mocked up a 67 stepside fender to a 66 step so you can see how it looks.

Jim

JimKshortstep4x4 · 05-09-2003, 09:05 PM

Here is what the 66 step looks like with a 67 fender.

Jim

05-06-2003, 08:15 AM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	66 steps with brackets for sale Pair of steps for sale, very straight with attaching brackets. $25 plus shipping from 49512. Here is a pic of top sides. Will post pic of bottom in separate post. Jim jimkemp@iserv.net Attached Images

05-06-2003, 08:49 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Pic of bottom of steps. Attached Images

05-06-2003, 10:29 PM	#3
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	will they work on a short wheelbase how much would it be to ship them to 40353,also do you have the bed fenders __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

05-09-2003, 12:06 PM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Would those work and or be correct on a 67-72 step short box? __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

05-09-2003, 09:02 PM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Rod, The steps can be made to work, but the appearance is different. Here is a pic with the 66 beside the 67-72 step. It looks like the step will bolt to the bedside with no problem and bolt to the fender with the drilling of a couple of holes. I also mocked up a 67 stepside fender to a 66 step so you can see how it looks. Jim Attached Images

05-07-2003, 01:05 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Truckman, The steps came off of a shortbed. Shipping costs, (UPS Ground) is $22. We only have the right fender and it has some rust damage, but it could be fixed. If you buy the steps, you can have the fender for the shipping costs. I can take a pic of it if you have an interest. Jim

05-09-2003, 01:29 PM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Rod, I am pretty sure that the appearance is different. I will take a pic of the two years together and post it. They may work but they may look different. They almost have to bolt up the same since the sides are the same. The curvature of the fender might be different but I can check that. Jim

05-09-2003, 09:05 PM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Here is what the 66 step looks like with a 67 fender. Jim Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.