Wanted: Air Cleaner for '69 C-10, 307 2bbl - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue'66 · 05-06-2003, 08:47 AM

Looking for a original air cleaner for a '69 C-10 with a 307 and 2 bbl carb. Need not be clean or perfect, just usable.

Thanks

billsbowtie · 05-06-2003, 10:12 AM

sent you a pm

stelth2002 · 05-06-2003, 11:07 AM

I have one... will include top the base and the riser for 20 plus shipping.

I assumed you knew the carb has a stud that comes out and you can attach it with a wing nut on the top.... if the nuts there its yours also

**COBALT** · 05-06-2003, 01:09 PM

I have a snorkel style off of a 327 that fits a Rochester 2gv. It has the tube in the bottom that runs to the valve cover using a breather. The top has a rubber seal, and I have a 2gv spacer (excellent condition), stud, and wing nut that fits it. The only problem is the paint is flaking off a bit (black), and somebody drilled a couple of holes in the lower part to try and increase air flow.

$15 + shipping for the air cleaner.
$25 + shipping for the air cleaner + spacer, stud & wing nut

05-06-2003, 08:47 AM	#1
Blue'66 Registered User Join Date: Dec 1999 Location: Akron, New York Posts: 379	Wanted: Air Cleaner for '69 C-10, 307 2bbl Looking for a original air cleaner for a '69 C-10 with a 307 and 2 bbl carb. Need not be clean or perfect, just usable. Thanks __________________ '48 1/2 ton 3100 '55 1 1/2 ton 4400 '59 Willy's CJ-5 '65 3/4 ton 4x4 '70 C-10 All drivers, no show trucks.

05-06-2003, 10:12 AM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	sent you a pm __________________ i have 67/72 chevy truck parts f/s.

05-06-2003, 11:07 AM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have one... will include top the base and the riser for 20 plus shipping. I assumed you knew the carb has a stud that comes out and you can attach it with a wing nut on the top.... if the nuts there its yours also __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!! Last edited by stelth2002; 05-06-2003 at 01:26 PM.

05-06-2003, 01:09 PM	#4
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	I have a snorkel style off of a 327 that fits a Rochester 2gv. It has the tube in the bottom that runs to the valve cover using a breather. The top has a rubber seal, and I have a 2gv spacer (excellent condition), stud, and wing nut that fits it. The only problem is the paint is flaking off a bit (black), and somebody drilled a couple of holes in the lower part to try and increase air flow. $15 + shipping for the air cleaner. $25 + shipping for the air cleaner + spacer, stud & wing nut __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.