AZ FS Floor Shift Manual Tilt steering column. VERY hard to come by! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 05-01-2012, 11:14 AM

SOLD TO 86C20 I have a very hard to come by floor shift tilt steering column removed from a VERY clean 1987 Silverado with a manual four speed. If you have a manual transmission you know how hard it is to find a tilt column for these trucks. The tilt is nice and tight and the wiper arm is in good shape. I believe this truck was a theft at one time as there is a chip below the piece that tilts and a crack in this same piece on the underside of the column. This in no way affects anything on the column and isn't noticable unless you are laying down on the seat. I just felt this should be mentioned. Includes the wiper pulse relay(not pictured) I will also include the intermediate steering shaft for free if the buyer pays the additional shipping. Price is $250 shipped anywhere in the continental US.

madcow75 · 05-01-2012, 06:37 PM

Not sure why? But why would you say this is hard to come by? Just asking.

86c20 · 05-01-2012, 10:33 PM

hi i would like to know if everything works and if you have the key for it? also do you take paypal? thank you, mike

**1774btcrew** · 05-01-2012, 11:24 PM

The reason they are hard to come by is the fact that most trucks with manual transmissions from this time period were cheaper models with not many options. For this reason not many of those trucks had tilt steering columns.
Posted via Mobile Device

**1774btcrew** · 05-01-2012, 11:26 PM

Quote:

Originally Posted by 86c20

hi i would like to know if everything works and if you have the key for it? also do you take paypal? thank you, mike

Sent PM
Posted via Mobile Device

madcow75 · 05-02-2012, 12:59 AM

Just asking... I have a few.

**special-K** · 05-02-2012, 08:40 PM

4spd tilts (and even 5spd 88-98) are uncommon to say the least. Since the time tilts started going in trucks back in '70 the large majority of those with tilt had automatics and no trucks had floor shift automatics like cars did. So,all truck floor shift tilts are a great find. A few,that's awesome

madcow75 · 05-03-2012, 09:09 AM

Really, thats good to no.

**1774btcrew** · 05-05-2012, 09:11 AM

SOLD
Posted via Mobile Device

RoughKuntry · 05-26-2013, 06:45 AM

I need a Floor Shift for a 1979 High Sierra Jimmy with a 4 Speed Manual Transmission, the Automatic one that was converted just went south? Does Anyone Have one that they are willing to sell? I need this Asap, So I can get back to work.

**1774btcrew** · 05-28-2013, 12:46 AM

Sent you a PM

86c20 · 05-28-2013, 09:28 PM

guys just so you know i got my colum put it in and it worked perfit. i would have no problem ever buying more parts from 1774btcrew. think i have bought a few things from him and all the parts have been just as he said

owner 84 · 05-28-2013, 10:45 PM

Quote:

Originally Posted by 86c20

guys just so you know i got my colum put it in and it worked perfit. i would have no problem ever buying more parts from 1774btcrew. think i have bought a few things from him and all the parts have been just as he said

I witness that either.

**1774btcrew** · 05-29-2013, 12:49 AM

Quote:

Originally Posted by 86c20

guys just so you know i got my colum put it in and it worked perfit. i would have no problem ever buying more parts from 1774btcrew. think i have bought a few things from him and all the parts have been just as he said

Thanks for the compliments guys! I try my best to provide quality parts to all of my customers! I have enjoyed dealing with you guys!

05-01-2012, 11:14 AM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,578	FS Floor Shift Manual Tilt steering column. VERY hard to come by! SOLD TO 86C20 I have a very hard to come by floor shift tilt steering column removed from a VERY clean 1987 Silverado with a manual four speed. If you have a manual transmission you know how hard it is to find a tilt column for these trucks. The tilt is nice and tight and the wiper arm is in good shape. I believe this truck was a theft at one time as there is a chip below the piece that tilts and a crack in this same piece on the underside of the column. This in no way affects anything on the column and isn't noticable unless you are laying down on the seat. I just felt this should be mentioned. Includes the wiper pulse relay(not pictured) I will also include the intermediate steering shaft for free if the buyer pays the additional shipping. Price is $250 shipped anywhere in the continental US. Last edited by 1774btcrew; 05-05-2012 at 09:10 AM.

05-01-2012, 06:37 PM	#2
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! Not sure why? But why would you say this is hard to come by? Just asking.

05-01-2012, 10:33 PM	#3
86c20 Registered User Join Date: Mar 2012 Location: edgartown mass Posts: 852	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! hi i would like to know if everything works and if you have the key for it? also do you take paypal? thank you, mike

05-01-2012, 11:24 PM	#4
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,578	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! The reason they are hard to come by is the fact that most trucks with manual transmissions from this time period were cheaper models with not many options. For this reason not many of those trucks had tilt steering columns. Posted via Mobile Device

05-02-2012, 12:59 AM	#6
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! Just asking... I have a few.

05-02-2012, 08:40 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,858	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! 4spd tilts (and even 5spd 88-98) are uncommon to say the least. Since the time tilts started going in trucks back in '70 the large majority of those with tilt had automatics and no trucks had floor shift automatics like cars did. So,all truck floor shift tilts are a great find. A few,that's awesome __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-03-2012, 09:09 AM	#8
madcow75 Registered User Join Date: Jun 2009 Location: Fort Erie , Ontario Posts: 525	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! Really, thats good to no.

05-05-2012, 09:11 AM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,578	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! SOLD Posted via Mobile Device

05-26-2013, 06:45 AM	#10
RoughKuntry Registered User Join Date: Mar 2013 Location: Washington Posts: 238	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! I need a Floor Shift for a 1979 High Sierra Jimmy with a 4 Speed Manual Transmission, the Automatic one that was converted just went south? Does Anyone Have one that they are willing to sell? I need this Asap, So I can get back to work. __________________ RoughKuntry 73 GMC 25 HUNDRED :Sold 79 GMC High Sierra 4x4 (Ma-Duece) :Sold 99 Chevrolet LS 4.8l/5 Speed Manual 4x4 :Selling 88 Chevrolet Burban 2500 4x4 :Buying

05-28-2013, 12:46 AM	#11
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,578	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! Sent you a PM __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

05-28-2013, 09:28 PM	#12
86c20 Registered User Join Date: Mar 2012 Location: edgartown mass Posts: 852	Re: FS Floor Shift Manual Tilt steering column. VERY hard to come by! guys just so you know i got my colum put it in and it worked perfit. i would have no problem ever buying more parts from 1774btcrew. think i have bought a few things from him and all the parts have been just as he said __________________ 1986 c20 "the hillbilly" 350 sm465 3.42gears 21mpg at 70mph 1985 k30 "the ice cream truck from hell" no rust az truck 197-8??? c30 "ramp truck" 454 1978 monte carlo 350 350th with 2.73 gears. no rust. sc car

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.