VA Cupholder console restored - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-10-2012, 10:35 PM

This was soda blasted then prepped and painted satin black. Nice trim ring, nice cupholder insert, and good bowtie. Finishing up with black painted factory hardware or can do stainless for $15 extra.

275 shipped FIRM in CONUS.

This console has a crack in the back that I didn't notice until after blasting. Will not affect structure and won't be seen if used in a truck. Normally I get 350 plus shipping for these so the crack has been taken into consideration already.

Also you will notice two screws in the side. I left these in because of what they are...they are connected to latches on the inside...I believe the PO of this console used it to hide spare keys inside the console. I think it's a cool option.

VA72C10 · 05-10-2012, 10:39 PM

Here is a picture of this and other consoles after blasting as I was prepping them for paint.

HotRod C/10 · 05-10-2012, 10:41 PM

very nice.......what type of paint do you like to use?

*sharpie1972* · 05-10-2012, 11:00 PM

Nice work Jonathan! Sharpie

VA72C10 · 05-10-2012, 11:05 PM

Quote:

Originally Posted by DSALRAM

very nice.......what type of paint do you like to use?

On some factory colors I use SEM...
also have used dupont for interiors sprayed professionally...

but on black...are you ready??? I use Krylon Fusion for plastics and spray 3-4 coats...

It bonds great to the consoles. It's very durable and I've used it to spray other interior items with success as well. I've used SEM black as well and I like the sheen of the Krylon better. I wish they had it in all the factory colors because I like how it looks and bonds to the console.

HeavyMetalChevy · 05-10-2012, 11:05 PM

dang thats a steal!

HotRod C/10 · 05-10-2012, 11:25 PM

I have used the Fusion as well with great results...........graining pads are my next goal on console restoration. I have used them before but the compound used is the real trick

7dee2 · 05-11-2012, 11:16 AM

Quote:

Originally Posted by VA72C10

On some factory colors I use SEM...
also have used dupont for interiors sprayed professionally...

but on black...are you ready??? I use Krylon Fusion for plastics and spray 3-4 coats...

It bonds great to the consoles. It's very durable and I've used it to spray other interior items with success as well. I've used SEM black as well and I like the sheen of the Krylon better. I wish they had it in all the factory colors because I like how it looks and bonds to the console.

Jonathan doesn't Krylon Fusion leave the pieces to shiny?

I thought they (console, door panels) are supposed to be a semi-gloss to matt type finish? Just curious I have been on the fence about using this product for that very reason.

Thanks,

CC69Rat · 05-11-2012, 12:35 PM

VA -- did you buy a soda blaster? Which one did you get?

VA72C10 · 05-11-2012, 01:41 PM

Quote:

Originally Posted by 7dee2

Jonathan doesn't Krylon Fusion leave the pieces to shiny?

I thought they (console, door panels) are supposed to be a semi-gloss to matt type finish? Just curious I have been on the fence about using this product for that very reason.

Thanks,

Yes, the factory pieces are a satin/semi-gloss finish. Krylon has a gloss but came out with the satin a couple years ago and I use that.

Quote:

Originally Posted by CC69Rat

VA -- did you buy a soda blaster? Which one did you get?

No, I found a guy local who blasts them for me. For what he charges, it would be a while before I could justify the investment. Also, he's been bead blasting my metal parts as well...

SPIRIT OF 76 CHEVY · 05-11-2012, 05:27 PM

I want that
Posted via Mobile Device

70LonghornCST · 05-11-2012, 07:12 PM

Quote:

Originally Posted by VA72C10

On some factory colors I use SEM...
also have used dupont for interiors sprayed professionally...

but on black...are you ready??? I use Krylon Fusion for plastics and spray 3-4 coats...

It bonds great to the consoles. It's very durable and I've used it to spray other interior items with success as well. I've used SEM black as well and I like the sheen of the Krylon better. I wish they had it in all the factory colors because I like how it looks and bonds to the console.

I agree on the Krylon Fusion. It is a perfect choice if you have an interior that matches their selection. Super adhesion (substrate must be properly prepped) and appropriate sheen.

VA72C10 · 05-12-2012, 07:19 PM

Here's my latest console. Sold already. But can make another like it with either brushed as shown or a polished plate.
Posted via Mobile Device

VA72C10 · 05-15-2012, 02:00 AM

ttt....275 shipped firm. Will be at Super Chevy this Friday and pretty sure I won't be bringing it back with me

CC69Rat · 05-15-2012, 08:29 AM

Black cup holder, not the billet one at that price correct? I was gonna say .. Wow!

I have one of Jonathan's consoles guys, he is really good at this. If you're considering it, go ahead and jump on it.

strokd 84 · 05-15-2012, 05:40 PM

It's mine gentlemen!
Posted via Mobile Device

VA72C10 · 05-15-2012, 05:45 PM

Quote:

Originally Posted by strokd 84

It's mine gentlemen!
Posted via Mobile Device

pm replied with payment info. just let me know which type hardware you prefer.

strokd 84 · 05-15-2012, 05:49 PM

I'll go black please.
Posted via Mobile Device

VA72C10 · 05-15-2012, 05:50 PM

Quote:

Originally Posted by CC69Rat

Black cup holder, not the billet one at that price correct? I was gonna say .. Wow!

I have one of Jonathan's consoles guys, he is really good at this. If you're considering it, go ahead and jump on it.

thanks, and yes, the black cupholder not billet

Billet ones go for 540. I have been thinking about painting one of the billet ones black and leave the cupholders stainless....might try it to see how it looks...can always strip the paint off and polish or brush it later...

crsweet91 · 06-21-2012, 06:57 PM

Been trying to contact you for a couple weeks for a console. Not getting an answer. Im looking for an unrestored one.

VA72C10 · 06-21-2012, 07:55 PM

Quote:

Originally Posted by crsweet91

Been trying to contact you for a couple weeks for a console. Not getting an answer. Im looking for an unrestored one.

sorry, keep meaning to take pics to respond and haven't. I will be around the house working tomorrow and will take pics then to make sure the one I'm willing to sell will work for you.

crsweet91 · 06-21-2012, 08:10 PM

seat belt one will be better since its going to be modified for drop in cup holders. As long as it comes complete Ill take it, some cracks and small repair will be acceptable. I trust your judgement, just send me your paypal info and Ill send you the money via gift. Shipping is to 94509. Thanks for getting back to me I figured you were just busy.

05-10-2012, 10:35 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Cupholder console restored This was soda blasted then prepped and painted satin black. Nice trim ring, nice cupholder insert, and good bowtie. Finishing up with black painted factory hardware or can do stainless for $15 extra. 275 shipped FIRM in CONUS. This console has a crack in the back that I didn't notice until after blasting. Will not affect structure and won't be seen if used in a truck. Normally I get 350 plus shipping for these so the crack has been taken into consideration already. Also you will notice two screws in the side. I left these in because of what they are...they are connected to latches on the inside...I believe the PO of this console used it to hide spare keys inside the console. I think it's a cool option. Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA. Last edited by VA72C10; 05-15-2012 at 02:01 AM.

05-10-2012, 10:39 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cupholder console restored Here is a picture of this and other consoles after blasting as I was prepping them for paint. Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-10-2012, 10:41 PM	#3
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Cupholder console restored very nice.......what type of paint do you like to use? __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

05-10-2012, 11:00 PM	#4
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Cupholder console restored Nice work Jonathan! Sharpie

05-10-2012, 11:05 PM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Cupholder console restored dang thats a steal! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-10-2012, 11:25 PM	#7
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: Cupholder console restored I have used the Fusion as well with great results...........graining pads are my next goal on console restoration. I have used them before but the compound used is the real trick __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

05-11-2012, 12:35 PM	#9
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: Cupholder console restored VA -- did you buy a soda blaster? Which one did you get? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-11-2012, 05:27 PM	#11
SPIRIT OF 76 CHEVY Registered User Join Date: Mar 2009 Location: ATL, GA Posts: 722	Re: Cupholder console restored I want that Posted via Mobile Device __________________ Stan's short bed fleet 69 custom deluxe swb 69 custom swb shop truck 70 custom sport truck swb 72 GMC super custom swb 72 Custom/10 swb inline 6 auto p/s p/b 77 silverado swb 86 Buick Grand National 92 silverado sport swb 06 silverado crew cab 07 caddy sts 08 f250 4x4 crew cab Sold!!! 12 dodge ram 1500 big horn

05-12-2012, 07:19 PM	#13
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cupholder console restored Here's my latest console. Sold already. But can make another like it with either brushed as shown or a polished plate. Posted via Mobile Device Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-15-2012, 02:00 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Cupholder console restored ttt....275 shipped firm. Will be at Super Chevy this Friday and pretty sure I won't be bringing it back with me __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-15-2012, 08:29 AM	#15
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: Cupholder console restored Black cup holder, not the billet one at that price correct? I was gonna say .. Wow! I have one of Jonathan's consoles guys, he is really good at this. If you're considering it, go ahead and jump on it. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-15-2012, 05:40 PM	#16
strokd 84 Registered User Join Date: Mar 2007 Location: Kansas City Posts: 120	Re: Cupholder console restored It's mine gentlemen! Posted via Mobile Device __________________ 1984 Silverado SWB Second Owner Featured in Custom Classic Trucks May 2013 http://www.customclassictrucks.com/f...let_silverado/

05-15-2012, 05:49 PM	#18
strokd 84 Registered User Join Date: Mar 2007 Location: Kansas City Posts: 120	Re: Cupholder console restored I'll go black please. Posted via Mobile Device __________________ 1984 Silverado SWB Second Owner Featured in Custom Classic Trucks May 2013 http://www.customclassictrucks.com/f...let_silverado/

06-21-2012, 06:57 PM	#20
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Cupholder console restored Been trying to contact you for a couple weeks for a console. Not getting an answer. Im looking for an unrestored one.

06-21-2012, 08:10 PM	#22
crsweet91 Registered User Join Date: Mar 2012 Location: Antioch, CA Posts: 265	Re: Cupholder console restored seat belt one will be better since its going to be modified for drop in cup holders. As long as it comes complete Ill take it, some cracks and small repair will be acceptable. I trust your judgement, just send me your paypal info and Ill send you the money via gift. Shipping is to 94509. Thanks for getting back to me I figured you were just busy.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.