|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-30-2012, 09:05 PM
|
#1 |
|
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
I need some info/favor about cranksensor
I am still trying to start my engine but have no spark. I had to add a cranksensor connector to my harness and don't know if I wired it correctly, the first time.The connector has A,B,C on it The way I wired it in is A to lt/grn blue pin #2, B to yel/blk blue pin #21 and C to blu/wht stripe, blu pin #12.
Can someone tell me if this is wrong or right? |
|
|
|
05-31-2012, 05:07 PM
|
#2 |
|
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
Re: I need some info/favor about cranksensor
No one? I think I found the answer I will try and test them tonite.
|
|
|
|
|
05-31-2012, 05:19 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
|
Re: I need some info/favor about cranksensor
What year harness? 2001 is C goes to 2, A goes to 12 and B goes to 21. So you may have a couple reversed.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
06-01-2012, 04:52 PM
|
#4 |
|
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
Re: I need some info/favor about cranksensor
It was reversed c&a so I swapped them and still no spark, I tested the cranksensor and it seems bad. I will try another sensor tonite.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
