New Wheels on the Project C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pro Performance · 06-04-2012, 07:20 PM

Hey Guys....

Just wanted to share some photos of the new wheels and tires I got on the project C10. They are 20x8.5" / 20x10" Polished Streeters. They fit perfect, and the fronts are tucked in to clear if you are wanting to cruise low and still turn some. A .25" - .50" spacer could be added if you want them pushed out some, depending on preference.

Front:
20x8.5" w/ 5.25" Backspace
Nitto NT05 255/35/20

Rear:
20x10" w/ 5.5" Backspace
Nitto NT05 315/35/20

Showwheels Streeter

Liddy71 · 06-04-2012, 07:46 PM

looks good

**N2TRUX** · 06-04-2012, 08:26 PM

Those are pretty bright for polished. They really look sharp.

Pro Performance · 06-04-2012, 08:49 PM

Thanks guys. Here is a picture with the new cap, that gives it more of a hot rod look that I am after.

butch86 · 06-04-2012, 10:34 PM

sweet

79 blue monster · 06-04-2012, 10:47 PM

pure badass!

BigMike608 · 06-05-2012, 08:32 AM

Nice! I like those

Pro Performance · 06-05-2012, 05:24 PM

Thanks guys! The 315 in the back is tight, and might rub a little bit, but I am Ok with it..... it is worth a little rubbing every once in a while to have the 315.

luifer76 · 06-05-2012, 05:41 PM

truck looks sick bro i love it...

monte0185 · 06-07-2012, 03:44 PM

Nice!! need a set for mine!!! Where did you get them?

NM. Just seen the link you posted!! Thanks!!

Pro Performance · 06-07-2012, 04:37 PM

No problem. We sell the wheels, so just let me know when you are ready and we will get you a good price!

- Travis

stepside83 · 06-07-2012, 08:58 PM

those are sweet, wheels, i like the stance on the truck as well can you share what you did to get the truck to sit how it does thanks

3r!c84 · 06-07-2012, 09:12 PM

What kind of drop setup do you have? Bags I'm guesssing
Posted via Mobile Device

f.monroe · 06-07-2012, 09:51 PM

Where are they close to rubbing? Inside at the wheel tub or outside at the fender lip? They do look good.
Frank
Posted via Mobile Device

Smoke_Dog · 06-07-2012, 10:31 PM

Dang, I wish everyone would just stop it! Now I want rims again! I like those very much!

Pro Performance · 06-08-2012, 12:03 AM

Quote:

Originally Posted by stepside83

those are sweet, wheels, i like the stance on the truck as well can you share what you did to get the truck to sit how it does thanks

Quote:

Originally Posted by 3r!c84

What kind of drop setup do you have? Bags I'm guesssing
Posted via Mobile Device

In the front, it is a stock cross member, with The Choppin' Block arms, SS7 bags, and a McGaughys 2.5" drop spindle. It rests right on the front cross member.

For the rear, it is an air-over-leaf with SS7 bags and a c-notch. Everything is under the bed. It will actually go a little lower if I notch for the center pumpkin. I might do that to even the stance just a bit more.

I know.... air-over-leaf.... but I will be switching to a Porterbuilt 4-link in the future.

Quote:

Originally Posted by f.monroe

Where are they close to rubbing? Inside at the wheel tub or outside at the fender lip? They do look good.
Frank
Posted via Mobile Device

I haven't actually driven the truck on the streets, but I can tell from clearance, it will rub a slight bit on the inside, if going in a driveway really crooked at an angle, if any at all. Going straight up and down, clears no problem whatsoever. If you had the same wheel with a 285 or 295, you would be Ok. The 315 just makes for a tight fit, but it does work.... a 5.25" backspace would be right on for the 315 tires, otherwise it is perfect.

Quote:

Originally Posted by Smoke_Dog

Dang, I wish everyone would just stop it! Now I want rims again! I like those very much!

Thanks man.... Depending on the color of the truck, I might paint the spokes a charcoal color. That is if the truck ends up silver.

gGMC DOG · 06-08-2012, 12:34 AM

yeah, i looked at those wheels a while back. they're nice wheels, but i didn't care for the showwheel stamped in the two different places. ncie looking truck.

bigsj · 06-08-2012, 08:41 AM

Those wheels and the stance are killer and I love the price of the wheels is that a regular price if so i mite have to talk to you about some.

blazer2007 · 06-08-2012, 10:26 AM

any pics at ride height?

Pro Performance · 06-08-2012, 12:07 PM

Quote:

Originally Posted by bigsj

Those wheels and the stance are killer and I love the price of the wheels is that a regular price if so i mite have to talk to you about some.

Thanks. That is regular price of the wheels. Just give us a call and we can get you all setup!

Quote:

Originally Posted by blazer2007

any pics at ride height?

Here is a picture that would be close to ride height.

stepside83 · 06-08-2012, 12:21 PM

thats a nice truck and thanks for the info, im looking to d the same set up, except the rear im doing a 2 link and a c notch under the bed of my stepper, hope it looks close to waht yours does when aired out, and every time i see these wheels i like them more and more i just might by a set for my stepper well see

SBTork · 06-08-2012, 05:28 PM

Looks good!!

I am curious, you have an AOL setup in the rear, how many leafs do you have left?

Pro Performance · 06-08-2012, 07:45 PM

Thanks. I have just the 1 main leaf, plus the overload. The bags are inboard the frame behind the axle.
Posted via Mobile Device

lowroder · 06-08-2012, 08:11 PM

kool look,,, i see alot of 80s trucks sporting that style here in ohio...

made2drag · 06-09-2012, 05:29 PM

sweet man...i got a bagged leaf set up too...your truck sits perfect...great choice on wheels

06-04-2012, 07:20 PM	#1
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	New Wheels on the Project C10 Hey Guys.... Just wanted to share some photos of the new wheels and tires I got on the project C10. They are 20x8.5" / 20x10" Polished Streeters. They fit perfect, and the fronts are tucked in to clear if you are wanting to cruise low and still turn some. A .25" - .50" spacer could be added if you want them pushed out some, depending on preference. Front: 20x8.5" w/ 5.25" Backspace Nitto NT05 255/35/20 Rear: 20x10" w/ 5.5" Backspace Nitto NT05 315/35/20 Showwheels Streeter

06-04-2012, 07:46 PM	#2
Liddy71 Registered User Join Date: May 2010 Location: Kenova, WV Posts: 821	Re: New Wheels on the Project C10 looks good

06-04-2012, 08:26 PM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: New Wheels on the Project C10 Those are pretty bright for polished. They really look sharp. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-04-2012, 08:49 PM	#4
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Wheels on the Project C10 Thanks guys. Here is a picture with the new cap, that gives it more of a hot rod look that I am after.

06-04-2012, 10:34 PM	#5
butch86 Registered User Join Date: Mar 2012 Location: harrisville, ms Posts: 377	Re: New Wheels on the Project C10 sweet __________________ most people sleep peacfully at night because, rough men stand ready to do violenceon there behalf.

06-04-2012, 10:47 PM	#6
79 blue monster Registered User Join Date: Feb 2012 Location: Pulaski, Wi Posts: 491	Re: New Wheels on the Project C10 pure badass! __________________ 1979 GMC 3/4 ton camper special 454 (7/8in drop) UPDATE: CADDILAC 500 SWAP AND 4X4 SWAP http://67-72chevytrucks.com/vboard/s...d.php?t=518625 1965 gmc 4x4 build : http://67-72chevytrucks.com/vboard/s...d.php?t=724972

06-05-2012, 08:32 AM	#7
BigMike608 Registered User Join Date: Oct 2010 Location: Dallas, TX Posts: 432	Re: New Wheels on the Project C10 Nice! I like those __________________ 1977 SWB C10 - "Woodson": 5.3 Vortec LS Swap, 4L60e Trans, 4.5/5 drop

06-05-2012, 05:24 PM	#8
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Wheels on the Project C10 Thanks guys! The 315 in the back is tight, and might rub a little bit, but I am Ok with it..... it is worth a little rubbing every once in a while to have the 315.

06-05-2012, 05:41 PM	#9
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: New Wheels on the Project C10 truck looks sick bro i love it... __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

06-07-2012, 03:44 PM	#10
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: New Wheels on the Project C10 Nice!! need a set for mine!!! Where did you get them? NM. Just seen the link you posted!! Thanks!! __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

06-07-2012, 04:37 PM	#11
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Wheels on the Project C10 No problem. We sell the wheels, so just let me know when you are ready and we will get you a good price! - Travis

06-07-2012, 08:58 PM	#12
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: New Wheels on the Project C10 those are sweet, wheels, i like the stance on the truck as well can you share what you did to get the truck to sit how it does thanks

06-07-2012, 09:12 PM	#13
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: New Wheels on the Project C10 What kind of drop setup do you have? Bags I'm guesssing Posted via Mobile Device __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

06-07-2012, 09:51 PM	#14
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: New Wheels on the Project C10 Where are they close to rubbing? Inside at the wheel tub or outside at the fender lip? They do look good. Frank Posted via Mobile Device __________________ Born and proudly residing in a Red State !

06-07-2012, 10:31 PM	#15
Smoke_Dog Registered User Join Date: Feb 2008 Location: Hickory, NC native, but stuck in Valdosta, Ga Posts: 615	Re: New Wheels on the Project C10 Dang, I wish everyone would just stop it! Now I want rims again! I like those very much!



Register or Log In To remove these advertisements.

06-08-2012, 12:34 AM	#17
gGMC DOG Registered User Join Date: Dec 2008 Location: Over yonder Posts: 259	Re: New Wheels on the Project C10 yeah, i looked at those wheels a while back. they're nice wheels, but i didn't care for the showwheel stamped in the two different places. ncie looking truck.

06-08-2012, 08:41 AM	#18
bigsj Registered User Join Date: Mar 2011 Location: Bowie Maryland Posts: 335	Re: New Wheels on the Project C10 Those wheels and the stance are killer and I love the price of the wheels is that a regular price if so i mite have to talk to you about some.

06-08-2012, 10:26 AM	#19
blazer2007 Registered User Join Date: Jan 2007 Location: vernon b.c. Posts: 3,022	Re: New Wheels on the Project C10 any pics at ride height?

06-08-2012, 12:21 PM	#21
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: New Wheels on the Project C10 thats a nice truck and thanks for the info, im looking to d the same set up, except the rear im doing a 2 link and a c notch under the bed of my stepper, hope it looks close to waht yours does when aired out, and every time i see these wheels i like them more and more i just might by a set for my stepper well see

06-08-2012, 05:28 PM	#22
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: New Wheels on the Project C10 Looks good!! I am curious, you have an AOL setup in the rear, how many leafs do you have left? __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

06-08-2012, 07:45 PM	#23
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: New Wheels on the Project C10 Thanks. I have just the 1 main leaf, plus the overload. The bags are inboard the frame behind the axle. Posted via Mobile Device

06-08-2012, 08:11 PM	#24
lowroder Registered User Join Date: Mar 2012 Location: toledo ohio Posts: 155	Re: New Wheels on the Project C10 kool look,,, i see alot of 80s trucks sporting that style here in ohio...

06-09-2012, 05:29 PM	#25
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: New Wheels on the Project C10 sweet man...i got a bagged leaf set up too...your truck sits perfect...great choice on wheels __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.