timing chain install questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SRVBLUES64 · 07-04-2012, 03:42 PM

I found that theres more then one mark on the crank gear I have a mild cam I put my mark on the two 0 will I be ok?

Wrenchbender Ret · 07-04-2012, 07:04 PM

There is an advance & retard position. You want to use the straight up. Check with the manufacture for the apropreate mark or direction sheet.

07-04-2012, 03:42 PM	#1
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	timing chain install questions I found that theres more then one mark on the crank gear I have a mild cam I put my mark on the two 0 will I be ok? Attached Images

07-04-2012, 07:04 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: timing chain install questions There is an advance & retard position. You want to use the straight up. Check with the manufacture for the apropreate mark or direction sheet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.