How do i change my turn signal switch? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72gmcshorty · 05-18-2003, 07:31 PM

Gotta do it. But don't know how. Any pointers?

jef5150 · 05-18-2003, 08:11 PM

disconect the battery first,{horn will probably blow a few times during dis-assembly}.Pull steering wheel,,use a puller its alot easier than trying to beat it loose with a hammer.Under the column youll see 2 little tabs.bend them out and the cover under the column will come out.youll also have to take dash out to connect new plug.it sits on top of column.remove screw that holds signal lever{dont forget to re install before u put the steering wheel on}unscrew the plastic assembly,pullout old harness,plug in new.Iwould try the new harness BEFORE you reinstall everything,,,

05-18-2003, 07:31 PM	#1
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	How do i change my turn signal switch? Gotta do it. But don't know how. Any pointers? __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-18-2003, 08:11 PM	#2
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	disconect the battery first,{horn will probably blow a few times during dis-assembly}.Pull steering wheel,,use a puller its alot easier than trying to beat it loose with a hammer.Under the column youll see 2 little tabs.bend them out and the cover under the column will come out.youll also have to take dash out to connect new plug.it sits on top of column.remove screw that holds signal lever{dont forget to re install before u put the steering wheel on}unscrew the plastic assembly,pullout old harness,plug in new.Iwould try the new harness BEFORE you reinstall everything,,,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.