Radiator Mounts - pics

[Roscoep]

I am installing a new radiator and support in my project. I am going with a four row radiator instead of the original three row. The mounting frame and radiator are exact to the old ones, but the new radiator is wider. I ordered new mounts, the bottom fits right, but the top stands up too high as you can see. The mounts are the right width and are for a four row. Do I have the wrong top mounts?

[tow guys]

Got a close up pic of that bottom mount with the radiator sitting in it? Looks like it's not down all the way for some reason.
Posted via Mobile Device

[airdale94]

I went through this with mine. It's the channel in the rubber insert is not deep enough. I ground down the radiator side channel with a dremel.

[gotchamel]

Just went through this,like mentioned grind them.I took off the whole extruded part on upper and lower for a snug fit.Also had to drill a hole in lower rubber to accodomate new 1/4" machine screw that holds support to core support.