![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2012
Location: franklin.tn
Posts: 600
|
donut gasket
what part # is the best donut gasket for 1969 350 factory manifolds to pipe?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: donut gasket
ttt
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#3 |
Hand Crafted C-10
![]() Join Date: Aug 2006
Location: Burien, WA
Posts: 5,180
|
Re: donut gasket
If you have stock ramhorn manifolds, depends on the style of pipe, whether you have a heat riser, etc.
With mine, I've never noticed the brand but have always used the steel donuts on my ramhorns to pipe... ...basically a steel ring with chamfers on both outside edges. They come in a composite too but if your manifolds are in good shape (w/o rust pits, etc), the steel ones lasts the longest. There's also a couple of gasket styles for use with a heat riser, etc. Your local parts store should stock at least the donuts and they're really inexpensive...couple bucks. Look at and measure your pipe & manifold before going shopping and check the mounting studs while you are down there. Have fun! ![]() Last edited by ETsC10; 08-24-2012 at 11:34 AM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|