exaust problems........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

special70gmc · 05-27-2003, 09:00 PM

-im installing ths engine for this guy down the road from me and im replacing a 79 350 with a 72 invader 350 out of a work van. the engine is clean!!! for 1972 btw. but heres the prob he exaust manifolds from the 79' wont fit the heads on the 72 ???? i thought all sbc's were the same theres an 18 inch off both back cylinders the bolts are far from lined up. i can only get 4 bolts in on either side im confused

-kyle

Blackhawkdc · 05-27-2003, 10:00 PM

how far off are the other two bolt holes? The manifold may have contracted. You can get expanders from a tool dealer

Longhorn Man · 05-27-2003, 11:46 PM

I have had this happen myself, it was a pain, but i got all the bolts in eventually. Try getting all of them in about 4 threads, and if you get them all started, then spin each one down a little bit untill your done.
When i installed the caddy engine I coulda sworn the 472 manifolds were not the same as the 425...but it was just from heat cycling.

05-27-2003, 09:00 PM	#1
special70gmc Registered User Join Date: Sep 2002 Location: long island, new york Posts: 1,333	exaust problems........ -im installing ths engine for this guy down the road from me and im replacing a 79 350 with a 72 invader 350 out of a work van. the engine is clean!!! for 1972 btw. but heres the prob he exaust manifolds from the 79' wont fit the heads on the 72 ???? i thought all sbc's were the same theres an 18 inch off both back cylinders the bolts are far from lined up. i can only get 4 bolts in on either side im confused -kyle __________________ 1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door

05-27-2003, 10:00 PM	#2
Blackhawkdc 440 american Horses Join Date: Mar 2001 Location: Anoka, MN USA Posts: 470	how far off are the other two bolt holes? The manifold may have contracted. You can get expanders from a tool dealer __________________ Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-27-2003, 11:46 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I have had this happen myself, it was a pain, but i got all the bolts in eventually. Try getting all of them in about 4 threads, and if you get them all started, then spin each one down a little bit untill your done. When i installed the caddy engine I coulda sworn the 472 manifolds were not the same as the 425...but it was just from heat cycling.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.