PA 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GM72K10 · 11-07-2012, 08:04 PM

These have been in the barn for 20 years and were removed from a small block C20 with Highlander option. Seat is solid but needs restoration. Brake booster (not shown) is from a C20 350 auto truck. Inner fenders are useable but not perfect.
Driveshaft(s) and carrier are the two piece type, what you see is all there is. $40.00 for all of it, PICKUP ONLY. thanks, located about 1 hour north of Pa.

**DaHos** · 11-07-2012, 08:16 PM

I know you said local pickup but........I think I could use that DS. Is that a 400 yoke?

(or at a minimum the carrier bearing bracket)

If not could u at least get me a measurement on the front shaft, center of u-joint to metal flange on the splined end. Yoke diameter and also the u-joint to u-joint center on the rear shaft.

Thx, D'

Ed 72 Sierra Grande · 11-07-2012, 11:48 PM

Would you be willing to sell the Bearing bracket?
I could go $30 for the bracket.

Let me know thanks.
From Ca. But may get my cousin to p/u. and ship

GM72K10 · 11-08-2012, 06:45 AM

Quote:

Originally Posted by Ed 72 Sierra Grande

Would you be willing to sell the Bearing bracket?
I could go $30 for the bracket.

Let me know thanks.
From Ca. But may get my cousin to p/u. and ship

OK, Dahos was first, but if you get me a zip code I could figure out shipping it.

GM72K10 · 11-08-2012, 06:46 AM

Quote:

Originally Posted by DaHos

I know you said local pickup but........I think I could use that DS. Is that a 400 yoke?

(or at a minimum the carrier bearing bracket)

If not could u at least get me a measurement on the front shaft, center of u-joint to metal flange on the splined end. Yoke diameter and also the u-joint to u-joint center on the rear shaft.

Thx, D'

I would consider shipping the carrier bearing bracket, and the front yoke without the driveshaft. thanks

**DaHos** · 11-08-2012, 07:25 AM

Morning, what would you need for the carrier mount shipped to 48917, and could I get the requested measurements.

Trying to get the factory correct DS for a BB w th400. (really don't want to build the shafts but just might have to$$$).

thx, D

GM72K10 · 11-08-2012, 04:00 PM

Thats a yoke from a th350. I'll ship the carrier in a medium flat rate box.
Thanks
Posted via Mobile Device

**DaHos** · 11-08-2012, 06:23 PM

I'm out .....Ill just keep looking for a complete setup............thx

GM72K10 · 11-09-2012, 06:51 AM

Quote:

Originally Posted by Ed 72 Sierra Grande

Would you be willing to sell the Bearing bracket?
I could go $30 for the bracket.

Let me know thanks.
From Ca. But may get my cousin to p/u. and ship

Sure, shipped in a medium flat rate box.
thanks

2003 silverado · 11-10-2012, 08:10 PM

Hello Neighbor Ill take the rest

GM72K10 · 11-10-2012, 08:50 PM

Quote:

Originally Posted by 2003 silverado

Hello Neighbor Ill take the rest

Looks like its all yours
Posted via Mobile Device

GM72K10 · 11-18-2012, 12:52 PM

Quote:

Originally Posted by 2003 silverado

Hello Neighbor Ill take the rest

Sold, nice meeting you, thanks!

11-07-2012, 08:04 PM	#1
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft These have been in the barn for 20 years and were removed from a small block C20 with Highlander option. Seat is solid but needs restoration. Brake booster (not shown) is from a C20 350 auto truck. Inner fenders are useable but not perfect. Driveshaft(s) and carrier are the two piece type, what you see is all there is. $40.00 for all of it, PICKUP ONLY. thanks, located about 1 hour north of Pa. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

11-07-2012, 08:16 PM	#2
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft I know you said local pickup but........I think I could use that DS. Is that a 400 yoke? (or at a minimum the carrier bearing bracket) If not could u at least get me a measurement on the front shaft, center of u-joint to metal flange on the splined end. Yoke diameter and also the u-joint to u-joint center on the rear shaft. Thx, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-07-2012, 11:48 PM	#3
Ed 72 Sierra Grande Registered User Join Date: Jul 2010 Location: Whittier Ca Posts: 172	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft Would you be willing to sell the Bearing bracket? I could go $30 for the bracket. Let me know thanks. From Ca. But may get my cousin to p/u. and ship __________________ Ed F 1972 Sierra Grande White Top Medium Olive 402 bb / Camper Stock, Loaded, Straight & Aged Nicely, No Tilt Original Resto would be nice $

11-08-2012, 07:25 AM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft Morning, what would you need for the carrier mount shipped to 48917, and could I get the requested measurements. Trying to get the factory correct DS for a BB w th400. (really don't want to build the shafts but just might have to$$$). thx, D __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-08-2012, 04:00 PM	#7
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft Thats a yoke from a th350. I'll ship the carrier in a medium flat rate box. Thanks Posted via Mobile Device __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

11-08-2012, 06:23 PM	#8
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft I'm out .....Ill just keep looking for a complete setup............thx __________________ 1967 C10 SWB Owner - Rustbelt Restorations

11-10-2012, 08:10 PM	#10
2003 silverado Registered User Join Date: Apr 2010 Location: West Chester Pa Posts: 965	Re: 72 C20 Highlander bench seat, inner fenders, brake booster, driveshaft Hello Neighbor Ill take the rest __________________ !972 K5 Blazer,Highlander,A/C a twin to the one I Had 1972 K/5 Blazer CST Highlander 15YR project 2003 Silverado Crew 2500HD (Daily driver) 1997 Ford focus (Beater) 2003 ford Taurus (student) 2014 Ford Fusion HYB (wife) 2003 Jetta ( Student)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.