NM WTB: Auto Brake Pedal Assembly........AGAIN - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HotRod C/10 · 11-25-2012, 10:30 PM

LOng story short I bought a pedal assembly from a member here and it did'nt have the 4 studs attached for the booster bracket. Went to dry fit it before powdercoating it and discovered the problem.......Please let me know what you have.

*mrdana60* · 11-25-2012, 11:07 PM

I m getting in a truck tomorrow and it was a auto truck. Make a offer? Would have traded you for the parts I just bought lol.

HotRod C/10 · 11-25-2012, 11:12 PM

ok, I would have too, but the seller said he was looking for the bolts and just got back with me a while ago.

*mrdana60* · 11-25-2012, 11:27 PM

Ok just let me know.

**70STOVEBOLT** · 11-26-2012, 06:30 PM

If you have a manual pedal setup, all you have to do is remove the clutch pedal from it. Also, I bolted my brake booster bracket on with the 2 studs for the manual master cylinder and there are 2 additional threaded bolt holes in the firewall for the booster bracket.

**Cash3481** · 11-26-2012, 06:59 PM

If you still need one lmk. I have an extra one out there!
Mike
Posted via Mobile Device

ScottG · 11-26-2012, 07:07 PM

I have one too. You pay shipping and it's yours.

HotRod C/10 · 11-26-2012, 08:46 PM

Nice gesture there ScottG.......send me some payment info.

**Cash3481** · 11-26-2012, 10:51 PM

Here's some pics of the deluxe pedal assembly.
Posted via Mobile Device

HotRod C/10 · 11-26-2012, 11:04 PM

thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL

**Cash3481** · 11-26-2012, 11:08 PM

Quote:

Originally Posted by HotRod C/10

thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL

No problem, if you need it... lmk.
Mike
Posted via Mobile Device

HotRod C/10 · 11-26-2012, 11:25 PM

Thanks Mike!

ScottG · 11-27-2012, 11:51 AM

If it doesn't work out, let me know. Will probably cost about 15 bucks to get it to you.

HotRod C/10 · 11-27-2012, 03:28 PM

Thanks Scott
Posted via Mobile Device

HotRod C/10 · 11-30-2012, 12:57 AM

Thanks to all that responded......Removing the clutch pedal was a breeze........Live and learn!

11-25-2012, 10:30 PM	#1
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	WTB: Auto Brake Pedal Assembly........AGAIN LOng story short I bought a pedal assembly from a member here and it did'nt have the 4 studs attached for the booster bracket. Went to dry fit it before powdercoating it and discovered the problem.......Please let me know what you have. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-25-2012, 11:07 PM	#2
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: WTB: Auto Brake Pedal Assembly........AGAIN I m getting in a truck tomorrow and it was a auto truck. Make a offer? Would have traded you for the parts I just bought lol.

11-25-2012, 11:12 PM	#3
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN ok, I would have too, but the seller said he was looking for the bolts and just got back with me a while ago. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-25-2012, 11:27 PM	#4
mrdana60 Account Suspended Join Date: Sep 2010 Location: centre al Posts: 2,471	Re: WTB: Auto Brake Pedal Assembly........AGAIN Ok just let me know.

11-26-2012, 06:30 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: WTB: Auto Brake Pedal Assembly........AGAIN If you have a manual pedal setup, all you have to do is remove the clutch pedal from it. Also, I bolted my brake booster bracket on with the 2 studs for the manual master cylinder and there are 2 additional threaded bolt holes in the firewall for the booster bracket. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

11-26-2012, 06:59 PM	#6
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WTB: Auto Brake Pedal Assembly........AGAIN If you still need one lmk. I have an extra one out there! Mike Posted via Mobile Device

11-26-2012, 07:07 PM	#7
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: WTB: Auto Brake Pedal Assembly........AGAIN I have one too. You pay shipping and it's yours. __________________ '67 C20 LBW

11-26-2012, 08:46 PM	#8
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Nice gesture there ScottG.......send me some payment info. __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-26-2012, 10:51 PM	#9
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: WTB: Auto Brake Pedal Assembly........AGAIN Here's some pics of the deluxe pedal assembly. Posted via Mobile Device Attached Images

11-26-2012, 11:04 PM	#10
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN thanks for the pic........im gonna see if I can remove my clutch pedal from my original set I pulled out.......may save everyone the headache that way.....except me. LOL __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-26-2012, 11:25 PM	#12
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks Mike! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-27-2012, 11:51 AM	#13
ScottG Registered User Join Date: Feb 2012 Location: Ventura,Ca Posts: 745	Re: WTB: Auto Brake Pedal Assembly........AGAIN If it doesn't work out, let me know. Will probably cost about 15 bucks to get it to you. __________________ '67 C20 LBW

11-27-2012, 03:28 PM	#14
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks Scott Posted via Mobile Device __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

11-30-2012, 12:57 AM	#15
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: WTB: Auto Brake Pedal Assembly........AGAIN Thanks to all that responded......Removing the clutch pedal was a breeze........Live and learn! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.