TX 73-87 SWB Fleetside bed and tailgate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 12-30-2012, 10:08 PM

I have a nice short fleet bed that has been in the barn for 15-20 years. I don't think I will ever get around to using it. If interested I will pull it out for pics. It is off an '83 Silverado and has the doors for dual tanks. That makes it technically correct for '79-'87 but it will fit all from '73 up.

I have a super nice tailgate off an '80 Chevrolet fleet side it does not have holes for a trim panel since it was from a custom deluxe truck.

These prices are less than the cost of aftermarket sheet metal and they are nice GM metal.

These are local pickup items due to the size alone.
If interested pm me and post here so I don't miss your posting.

$600
Frank
Posted via Mobile Device

aggie91 · 12-31-2012, 11:47 PM

PM sent...

f.monroe · 01-06-2013, 06:40 PM

Here are a couple cell phone pics.there is a little surface rust on it in places but there are no rust holes in this bed. There are holes along the top because it had rails and a tool box at one time. I have owned this since about 1993. It's been in my barn for 15-18 years. Time flies .
Posted via Mobile Device

f.monroe · 01-06-2013, 06:41 PM

And
Posted via Mobile Device

f.monroe · 01-06-2013, 06:42 PM

15 years of dust
Posted via Mobile Device

f.monroe · 01-06-2013, 06:44 PM

Washed it and left it wet to show that it is straight.
Posted via Mobile Device

f.monroe · 01-06-2013, 06:49 PM

Bed floor is real straight. Very minor dings at best.
Posted via Mobile Device

f.monroe · 01-06-2013, 06:51 PM

Side shot
Posted via Mobile Device

54Caddy · 01-06-2013, 09:03 PM

dang to bad your so far away

aggie91 · 01-07-2013, 06:48 PM

Bed looks good. The parts alone to fix what we have definitely make this a good choice. Let me talk it over with Korbin to see what we want to do. I also ended up with a good step side bed for free, just need a tailgate for it.

I'll let you know soon.

f.monroe · 01-07-2013, 10:03 PM

Quote:

Originally Posted by aggie91

Bed looks good. The parts alone to fix what we have definitely make this a good choice. Let me talk it over with Korbin to see what we want to do. I also ended up with a good step side bed for free, just need a tailgate for it.

I'll let you know soon.

No problem,
I read the post about the free step side bed. It would definitely free up some funds for the rest of the build to use the stepper. It would be much easier to raise the floor and this bed is so nice it would be a shame to cut it.
Frank
Posted via Mobile Device

esbstuff · 01-07-2013, 10:55 PM

Not going to Dallas on wendesday are you?

f.monroe · 01-07-2013, 11:17 PM

Quote:

Originally Posted by esbstuff

Not going to Dallas on wendesday are you?

No Sir.
I do travel up there but I know I won't be there when you are traveling through. How much trailer space do you have to haul things back with you?
Frank
Posted via Mobile Device

esbstuff · 01-07-2013, 11:50 PM

Well it just depends how much stuff I buy...

got 2 trailers one 18ft car hauler and a 25ft deckover. I have a paying load (which can go on either trailer, the 25fter is twice the trailer...lol) to deliver to Dallas and a driver that needs to get back to go on vacation. I really don't know if he can swing the extra couple hrs of drive time. I keep hoping for a good parts truck, but may take what I can get...I have pushed off the load from saturday to wednesday, but the drive has to be back thursday to leave on vacation.

esbstuff · 01-08-2013, 08:53 PM

I sent a pm...
Posted via Mobile Device

aggie91 · 01-09-2013, 10:08 AM

Quote:

Originally Posted by f.monroe

No problem,
I read the post about the free step side bed. It would definitely free up some funds for the rest of the build to use the stepper. It would be much easier to raise the floor and this bed is so nice it would be a shame to cut it.
Frank
Posted via Mobile Device

Thanks, I will have to pass on this one. It is a nice bed and would not require much work to refinish it, I too would hate to cut this one to raise the floor. Our budget and time are getting short so we are going to make use of the step side bed for now. He really wanted a fleet, but maybe we can do it later as an "upgrade".

Thanks again.

f.monroe · 01-14-2013, 10:59 PM

Ttt
Posted via Mobile Device

f.monroe · 02-04-2013, 02:17 PM

Bump. New Price is $600 for both .
Frank

Jonboy · 02-04-2013, 03:42 PM

Of course this comes up after I sold my truck. I was half way looking for a clean bed, too. Heck of a deal, though.

f.monroe · 02-05-2013, 08:16 PM

Buy the bed so will have it when you find a truck.
I am going to try to sell off a few things to raise funds for the air ride controller . I am going to have to put a few things on eBay after it slows down around here. We have to show animals in San Antonio this week and next then it slows down for a month before the next show. Fun
Frank
Posted via Mobile Device

SCOTI · 02-20-2013, 07:53 PM

Still have this one Frank?

f.monroe · 02-20-2013, 08:49 PM

Yes sir it's still here. I am staying firm on it. So I think it has ran a couple potential local buyers off.
Farnk
Posted via Mobile Device

SCOTI · 02-20-2013, 11:32 PM

Quote:

Originally Posted by f.monroe

Yes sir it's still here. I am staying firm on it. So I think it has ran a couple potential local buyers off.
Farnk
Posted via Mobile Device

PM sent...

f.monroe · 02-28-2013, 12:06 AM

Still available.
Posted via Mobile Device

SCOTI · 02-28-2013, 09:18 AM

I haven't forgotten you Frank. I just haven't left work @ a decent hour to give you a shout but will.

12-30-2012, 10:08 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	73-87 SWB Fleetside bed and tailgate I have a nice short fleet bed that has been in the barn for 15-20 years. I don't think I will ever get around to using it. If interested I will pull it out for pics. It is off an '83 Silverado and has the doors for dual tanks. That makes it technically correct for '79-'87 but it will fit all from '73 up. I have a super nice tailgate off an '80 Chevrolet fleet side it does not have holes for a trim panel since it was from a custom deluxe truck. These prices are less than the cost of aftermarket sheet metal and they are nice GM metal. These are local pickup items due to the size alone. If interested pm me and post here so I don't miss your posting. $600 Frank Posted via Mobile Device __________________ Born and proudly residing in a Red State ! Last edited by f.monroe; 02-04-2013 at 02:18 PM.

12-31-2012, 11:47 PM	#2
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 73-87 SWB Fletside bed and tailgate PM sent... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-06-2013, 06:40 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Here are a couple cell phone pics.there is a little surface rust on it in places but there are no rust holes in this bed. There are holes along the top because it had rails and a tool box at one time. I have owned this since about 1993. It's been in my barn for 15-18 years. Time flies . Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State ! Last edited by f.monroe; 01-06-2013 at 06:54 PM. Reason: Details

01-06-2013, 06:41 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate And Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State !

01-06-2013, 06:42 PM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate 15 years of dust Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State !

01-06-2013, 06:44 PM	#6
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Washed it and left it wet to show that it is straight. Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State !

01-06-2013, 06:49 PM	#7
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Bed floor is real straight. Very minor dings at best. Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State !

01-06-2013, 06:51 PM	#8
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Side shot Posted via Mobile Device Attached Images __________________ Born and proudly residing in a Red State !

01-06-2013, 09:03 PM	#9
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: 73-87 SWB Fletside bed and tailgate dang to bad your so far away __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

01-07-2013, 06:48 PM	#10
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 73-87 SWB Fletside bed and tailgate Bed looks good. The parts alone to fix what we have definitely make this a good choice. Let me talk it over with Korbin to see what we want to do. I also ended up with a good step side bed for free, just need a tailgate for it. I'll let you know soon. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-07-2013, 10:55 PM	#12
esbstuff Registered User Join Date: Jun 2011 Location: St Robert, Mo Posts: 730	Re: 73-87 SWB Fletside bed and tailgate Not going to Dallas on wendesday are you?

01-07-2013, 11:50 PM	#14
esbstuff Registered User Join Date: Jun 2011 Location: St Robert, Mo Posts: 730	Re: 73-87 SWB Fletside bed and tailgate Well it just depends how much stuff I buy... got 2 trailers one 18ft car hauler and a 25ft deckover. I have a paying load (which can go on either trailer, the 25fter is twice the trailer...lol) to deliver to Dallas and a driver that needs to get back to go on vacation. I really don't know if he can swing the extra couple hrs of drive time. I keep hoping for a good parts truck, but may take what I can get...I have pushed off the load from saturday to wednesday, but the drive has to be back thursday to leave on vacation.

01-08-2013, 08:53 PM	#15
esbstuff Registered User Join Date: Jun 2011 Location: St Robert, Mo Posts: 730	Re: 73-87 SWB Fletside bed and tailgate I sent a pm... Posted via Mobile Device

01-14-2013, 10:59 PM	#17
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Ttt Posted via Mobile Device __________________ Born and proudly residing in a Red State !

02-04-2013, 02:17 PM	#18
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Bump. New Price is $600 for both . Frank __________________ Born and proudly residing in a Red State !



Register or Log In To remove these advertisements.

02-04-2013, 03:42 PM	#19
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 73-87 SWB Fletside bed and tailgate Of course this comes up after I sold my truck. I was half way looking for a clean bed, too. Heck of a deal, though.

02-05-2013, 08:16 PM	#20
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Buy the bed so will have it when you find a truck. I am going to try to sell off a few things to raise funds for the air ride controller . I am going to have to put a few things on eBay after it slows down around here. We have to show animals in San Antonio this week and next then it slows down for a month before the next show. Fun Frank Posted via Mobile Device __________________ Born and proudly residing in a Red State !

02-20-2013, 07:53 PM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: 73-87 SWB Fletside bed and tailgate Still have this one Frank? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

02-20-2013, 08:49 PM	#22
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Yes sir it's still here. I am staying firm on it. So I think it has ran a couple potential local buyers off. Farnk Posted via Mobile Device __________________ Born and proudly residing in a Red State !

02-28-2013, 12:06 AM	#24
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: 73-87 SWB Fletside bed and tailgate Still available. Posted via Mobile Device __________________ Born and proudly residing in a Red State !

02-28-2013, 09:18 AM	#25
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Re: 73-87 SWB Fletside bed and tailgate I haven't forgotten you Frank. I just haven't left work @ a decent hour to give you a shout but will. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.