Good GMC factory exhaust pic? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FetchMeAPepsi · 01-04-2013, 02:04 AM

Does anyone have a factory correct exhaust pic from the 305 V6's?
I'm getting mine redone and want to stay as true to orig as possible, aside from going with 3" pipes instead of 1 1/2 or whatever they came with.

I'm needing the routing and an exit view to show the pipe benders.

**chevy_man5** · 01-04-2013, 02:40 AM

If no one else gets back to you by the weekend, I can take as many pics as you need. As far as I know mine is original (aside from the pop can/hose clamp temporary patch).

There is a little exhaust info, and a sound clip on Jolly's site if you are interested. http://www.6066gmcguy.org/performance.htm

FetchMeAPepsi · 01-04-2013, 02:50 AM

Thanks CM! 4x4 is exactly what I'm needing. I should have put that in the first post, but I didn't even think about it being different than 4x2.

**Corts60** · 01-04-2013, 02:07 PM

Check 6066gmcguy.org. I think there is some dealer ads on there that show the OG routing.
Posted via Mobile Device

**chevy_man5** · 01-09-2013, 10:55 PM

FetchMeAPepsi, I am so sorry, I didn't even set foot in the garage this past weekend! I am going out to the garage right now to take them. I will get them posted on here either tonight, or tomorrow night. If you want to PM me your e-mail address, I can send you pictures there too, then the wont have to be re-sized.

**chevy_man5** · 01-09-2013, 11:42 PM

Like I said earlier, please disregard the pop can/hose clamp patch! LOL

Please disregard the clutter too... I have 10 pounds of stuff in a 5 pound box.

Name: DSCN2093 (Small).jpg
Views: 149
Size: 58.1 KB

Name: DSCN2093 (Small).jpg
Views: 149
Size: 58.1 KB

Name: DSCN2094 (Small).jpg
Views: 147
Size: 43.3 KB

Name: DSCN2095 (Small).jpg
Views: 159
Size: 54.9 KB

Name: DSCN2096 (Small).jpg
Views: 147
Size: 55.4 KB

Name: DSCN2097 (Small).jpg
Views: 145
Size: 57.4 KB

**chevy_man5** · 01-09-2013, 11:43 PM

more

**chevy_man5** · 01-09-2013, 11:44 PM

even more

**chevy_man5** · 01-09-2013, 11:45 PM

almost done

**chevy_man5** · 01-09-2013, 11:46 PM

The end

Name: DSCN2119 (Small).jpg
Views: 142
Size: 32.6 KB

Name: DSCN2120 (Small).jpg
Views: 140
Size: 35.2 KB

**Corts60** · 01-09-2013, 11:48 PM

Good pics. On 2wd models, the exhaust runs through the center of the trans crossmember then goes back to the driver side.
Posted via Mobile Device

FetchMeAPepsi · 01-10-2013, 09:28 AM

Thanks Chevy Man! That's exactly what I needed. This will make routing so much easier for the pipe bender who has never seen a 305v6 before.

**chevy_man5** · 01-10-2013, 11:28 AM

No problem. Post pictures of what he comes up with when he gets it done please!!

If you need anything else, let me know.

01-04-2013, 02:04 AM	#1
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Good GMC factory exhaust pic? Does anyone have a factory correct exhaust pic from the 305 V6's? I'm getting mine redone and want to stay as true to orig as possible, aside from going with 3" pipes instead of 1 1/2 or whatever they came with. I'm needing the routing and an exit view to show the pipe benders. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

01-04-2013, 02:40 AM	#2
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? If no one else gets back to you by the weekend, I can take as many pics as you need. As far as I know mine is original (aside from the pop can/hose clamp temporary patch). There is a little exhaust info, and a sound clip on Jolly's site if you are interested. http://www.6066gmcguy.org/performance.htm __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-04-2013, 02:50 AM	#3
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: Good GMC factory exhaust pic? Thanks CM! 4x4 is exactly what I'm needing. I should have put that in the first post, but I didn't even think about it being different than 4x2. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

01-04-2013, 02:07 PM	#4
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Good GMC factory exhaust pic? Check 6066gmcguy.org. I think there is some dealer ads on there that show the OG routing. Posted via Mobile Device __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

01-09-2013, 10:55 PM	#5
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? FetchMeAPepsi, I am so sorry, I didn't even set foot in the garage this past weekend! I am going out to the garage right now to take them. I will get them posted on here either tonight, or tomorrow night. If you want to PM me your e-mail address, I can send you pictures there too, then the wont have to be re-sized. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-09-2013, 11:42 PM	#6
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? Like I said earlier, please disregard the pop can/hose clamp patch! LOL Please disregard the clutter too... I have 10 pounds of stuff in a 5 pound box. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread Last edited by chevy_man5; 01-09-2013 at 11:48 PM.

01-09-2013, 11:43 PM	#7
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? more Attached Images __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-09-2013, 11:44 PM	#8
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? even more Attached Images __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-09-2013, 11:45 PM	#9
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? almost done Attached Images __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-09-2013, 11:46 PM	#10
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? The end __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-09-2013, 11:48 PM	#11
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: Good GMC factory exhaust pic? Good pics. On 2wd models, the exhaust runs through the center of the trans crossmember then goes back to the driver side. Posted via Mobile Device __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

01-10-2013, 09:28 AM	#12
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: Good GMC factory exhaust pic? Thanks Chevy Man! That's exactly what I needed. This will make routing so much easier for the pipe bender who has never seen a 305v6 before. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.

01-10-2013, 11:28 AM	#13
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Good GMC factory exhaust pic? No problem. Post pictures of what he comes up with when he gets it done please!! If you need anything else, let me know. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.