Parts for my 78 K20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

conawasa · 06-10-2003, 09:50 AM

I am looking for the following parts for my 78 K20 4X4:

8 ft bed
tailgate
both doors
both door panels (preferably tan but any darker color will do)
bench seat

If anyone knows where I can hopefully find these parts I'd really appreciate it! I am located in soutn-central Ohio but traveling for parts isnt' a big issue.

**old Rusty C10** · 06-10-2003, 10:08 AM

gooot the tailgate for $75 no rust through just some surface rust on the inside where cargo has scraped into it Im in NJ but id be willing to save ya shipping by meeting you in PA if ya want Im planning on doing a junkyard run to Hazleton PA in the near future if ya want it
please post here for reply

conawasa · 06-10-2003, 10:26 AM

What would it cost to just ship it to me?

**old Rusty C10** · 06-11-2003, 11:10 AM

gotta send me your zip code and ill check a couple places for ya

**old Rusty C10** · 06-11-2003, 02:41 PM

ya know i just realized my truck tailgate has the chevrolet logo on it just before i ship it to you and its no good

**old Rusty C10** · 06-12-2003, 05:18 PM

are ya still interested?

ric · 06-12-2003, 08:09 PM

Got a good 79 tailgate off a dually that should fit. Hows $25?

Also, have two door shells with a little surface rust. Hows $50?

I have two dark blue door panels. Hows $20?

I have a 8ft bed off an 83 that had dual tanks. The bed has some rust right over the rear wheels... Hows free? Its already lose.

No standard cab seats.

Email me. I can send you pics.

Marengo is 30 minutes North of Columbus off I71.

ric

**old Rusty C10** · 06-13-2003, 02:48 PM

in regards to your door panels for $20 if therye in good shape and ya have pics i may want em if you dont sell em to him. They would need to be shipped to 08879 tho any idea on price for that?

ric · 06-14-2003, 07:21 AM

The panels came from GM blue. They were in a silverado. As I have seen too many times somebody tried to re-color these black doing a poor job. Most of the black has lifted up and has either already come off or will.

These will clean up with some effort. I have doen this more than once myself.

Send me an email if you still need pics.

ric

arnerchevyfarm · 06-15-2003, 12:29 AM

i have a bench seat possible ,door panels,and tailgate.seat may need upolstered.i`m in missouri.arnerchevyfarm@aol.com or call (417)425-2515 ask for mike

tibbar · 06-17-2003, 04:11 PM

I have the bed and rear gate, in excellent condition. I've also got doors, but needed to know if you wanted power or plain. Have a big asotment of door panels. I can probably help you with all your needs. Only thing is that I live in Kansas.

If you have any other Q's you can e-mail me @

tcarec@sctelcom.net Hope this helped Rob.

ric · 06-18-2003, 11:49 AM

Old Rusty C10. Sent two emails to the address you provided in your email to me. Both bounced back with email errors on your end.

Let me know if you are still interested.

ric

**Captkaos** · 06-18-2003, 03:19 PM

1974ChevyC10 · 06-19-2003, 12:58 PM

Quote:

Originally posted by conawasa
I am looking for the following parts for my 78 K20 4X4:

8 ft bed
tailgate
both doors
both door panels (preferably tan but any darker color will do)
bench seat

If anyone knows where I can hopefully find these parts I'd really appreciate it! I am located in soutn-central Ohio but traveling for parts isnt' a big issue.

i have a whole 78 chevy im parting out-the front clip is spoken for but i do have a set of good doors including door panels,a bench seat,the bed on my truck needs alot of work as it has a few huge dents in it but a good body person could possibly fix it and the tailgate is alright on it.if you want to call me im at 480-430-8235 ask for Jim.im in phoenix arizona.

stlaser · 06-20-2003, 11:22 PM

I have a nice bench seat would look like new if it was clean good. I'm in Northeastern Indiana. Will take $25 bucks if your interested. It came out of one of my parts trucks. The owner replaced it when he bought the truck apparently a hefty man owned it before him its an 80 truck.

conawasa · 06-23-2003, 04:30 PM

stlaser,

can you send me a pic of the seat?

arnerchevyfarm · 06-23-2003, 04:44 PM

i will get some pics of seat. i have a roll of film i need to finish when its done i will one hour it. give me a day or so. thanks arnerchevyfarm mike.

stlaser · 06-23-2003, 05:48 PM

Conawasa, give me a couple days I'll try to get u a pic our camera broke but I can borrow one.

stlaser · 06-23-2003, 10:18 PM

Conawasa I sent an e-mail because I couldn't get the pic to post right so let me know.

conawasa · 06-24-2003, 03:51 PM

I replied to your e-mail, stlaser.

06-10-2003, 09:50 AM	#1
conawasa Registered User Join Date: Jan 2003 Location: Circleville, Ohio Posts: 20	Parts for my 78 K20 I am looking for the following parts for my 78 K20 4X4: 8 ft bed tailgate both doors both door panels (preferably tan but any darker color will do) bench seat If anyone knows where I can hopefully find these parts I'd really appreciate it! I am located in soutn-central Ohio but traveling for parts isnt' a big issue.

06-10-2003, 10:08 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	gooot the tailgate for $75 no rust through just some surface rust on the inside where cargo has scraped into it Im in NJ but id be willing to save ya shipping by meeting you in PA if ya want Im planning on doing a junkyard run to Hazleton PA in the near future if ya want it please post here for reply __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-11-2003, 11:10 AM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	gotta send me your zip code and ill check a couple places for ya __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-11-2003, 02:41 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	ya know i just realized my truck tailgate has the chevrolet logo on it just before i ship it to you and its no good __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-12-2003, 05:18 PM	#6
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	are ya still interested? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-10-2003, 10:26 AM	#3
conawasa Registered User Join Date: Jan 2003 Location: Circleville, Ohio Posts: 20	What would it cost to just ship it to me?

06-12-2003, 08:09 PM	#7
ric Registered User Join Date: Dec 2001 Location: NorthOfColumbusOhio Posts: 219	Got a good 79 tailgate off a dually that should fit. Hows $25? Also, have two door shells with a little surface rust. Hows $50? I have two dark blue door panels. Hows $20? I have a 8ft bed off an 83 that had dual tanks. The bed has some rust right over the rear wheels... Hows free? Its already lose. No standard cab seats. Email me. I can send you pics. Marengo is 30 minutes North of Columbus off I71. ric

06-13-2003, 02:48 PM	#8
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	in regards to your door panels for $20 if therye in good shape and ya have pics i may want em if you dont sell em to him. They would need to be shipped to 08879 tho any idea on price for that? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-14-2003, 07:21 AM	#9
ric Registered User Join Date: Dec 2001 Location: NorthOfColumbusOhio Posts: 219	The panels came from GM blue. They were in a silverado. As I have seen too many times somebody tried to re-color these black doing a poor job. Most of the black has lifted up and has either already come off or will. These will clean up with some effort. I have doen this more than once myself. Send me an email if you still need pics. ric

06-15-2003, 12:29 AM	#10
arnerchevyfarm Registered User Join Date: May 2003 Location: Missouri Posts: 38	i have a bench seat possible ,door panels,and tailgate.seat may need upolstered.i`m in missouri.arnerchevyfarm@aol.com or call (417)425-2515 ask for mike __________________ for sale 1971 chevy. Factory big block and factory air truck.Very rare.....454. 400 turbo..373 gear...ps....pb....ac Also have tons of 67-72 parts trucks.

06-17-2003, 04:11 PM	#11
tibbar Registered User Join Date: Jun 2003 Location: turon ks Posts: 120	pu parts I have the bed and rear gate, in excellent condition. I've also got doors, but needed to know if you wanted power or plain. Have a big asotment of door panels. I can probably help you with all your needs. Only thing is that I live in Kansas. If you have any other Q's you can e-mail me @ tcarec@sctelcom.net Hope this helped Rob.

06-18-2003, 11:49 AM	#12
ric Registered User Join Date: Dec 2001 Location: NorthOfColumbusOhio Posts: 219	Old Rusty C10. Sent two emails to the address you provided in your email to me. Both bounced back with email errors on your end. Let me know if you are still interested. ric

06-18-2003, 03:19 PM	#13
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	How about a whole truck for $750? You gotta come get it though... ( 2WD C20 ) http://www.captkaoscustoms.com/C20/C20forsale.jpg http://www.captkaoscustoms.com/C20/C20interior.jpg http://www.captkaoscustoms.com/C20/dentgate.jpg http://www.captkaoscustoms.com/C20/drvdoor.jpg http://www.captkaoscustoms.com/C20/drvfrt.jpg http://www.captkaoscustoms.com/C20/drvrrqtr.jpg http://www.captkaoscustoms.com/C20/passfrqtr.jpg http://www.captkaoscustoms.com/C20/passfrt.jpg http://www.captkaoscustoms.com/C20/passrust1.jpg http://www.captkaoscustoms.com/C20/passrust2.jpg http://www.captkaoscustoms.com/C20/windshield.jpg __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

06-20-2003, 11:22 PM	#15
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	I have a nice bench seat would look like new if it was clean good. I'm in Northeastern Indiana. Will take $25 bucks if your interested. It came out of one of my parts trucks. The owner replaced it when he bought the truck apparently a hefty man owned it before him its an 80 truck. __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.

06-23-2003, 04:30 PM	#16
conawasa Registered User Join Date: Jan 2003 Location: Circleville, Ohio Posts: 20	stlaser, can you send me a pic of the seat?



Register or Log In To remove these advertisements.

06-23-2003, 04:44 PM	#17
arnerchevyfarm Registered User Join Date: May 2003 Location: Missouri Posts: 38	i will get some pics of seat. i have a roll of film i need to finish when its done i will one hour it. give me a day or so. thanks arnerchevyfarm mike. __________________ for sale 1971 chevy. Factory big block and factory air truck.Very rare.....454. 400 turbo..373 gear...ps....pb....ac Also have tons of 67-72 parts trucks.

06-23-2003, 05:48 PM	#18
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	Conawasa, give me a couple days I'll try to get u a pic our camera broke but I can borrow one. __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.

06-23-2003, 10:18 PM	#19
stlaser Fabricator Join Date: Mar 2003 Location: Indiana Posts: 156	Conawasa I sent an e-mail because I couldn't get the pic to post right so let me know. __________________ 84 C30 Chassis 60 & 14, 454/400/NP205 Retroing 98 X-tended Cab Built with the blood and sweat from the hands of a Chevy man.

06-24-2003, 03:51 PM	#20
conawasa Registered User Join Date: Jan 2003 Location: Circleville, Ohio Posts: 20	I replied to your e-mail, stlaser.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.