|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-27-2013, 02:35 AM
|
#1 |
|
Senior Member
 
Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,500
|
Trans linkage shifter connector for 700r4 swap
Does anyone have any input on what to do in regards to connecting the stock automatic shift linkage to a 700r4? I included an illustration from the LMC catalog. I have all of the stock linkage from a TH350 equipped truck (all but part #32-4830) The shaft on the 700r4 is different and it is not a direct swap. I am looking at either running the Lokar custom set up (34-0726), or bying a TH350 trans linkage and cutting the middle out and welding the one from the 700r4 in...
Does anyone have a spare shift linkage arm that they want to part with (for less than LMC wants)? http://www.lmctruck.com/icatalog/cb/full.aspx?Page=125 |
|
|
|
01-27-2013, 10:51 AM
|
#2 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Trans linkage shifter connector for 700r4 swap
On my 4l60e I used the stock bar from the column and used a car linkage on the trans. No problem. No need for fancy lokar stuff...... or a torque converter cover..
Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
01-27-2013, 10:59 AM
|
#3 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: Trans linkage shifter connector for 700r4 swap
Correction, I may have just welded some junk together and don't really remember. Either way it was pretty simple to setup.
Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
01-27-2013, 12:43 PM
|
#4 |
|
Registered User
Join Date: Jun 2009
Location: Arlington Texas
Posts: 602
|
Re: Trans linkage shifter connector for 700r4 swap
The whole stock linkage worked just fine on my 700r4 swap from a th350.
__________________
1970 GMC truck  1988 Harley 1200 Sportster 
|
|
|
|
|
01-27-2013, 02:26 PM
|
#5 | |
|
Registered User
Join Date: Sep 2012
Location: San Antonio, TX
Posts: 1,026
|
Re: Trans linkage shifter connector for 700r4 swap
Quote:
Posted via Mobile Device
__________________
Jeff 1972 Cheyenne Super SWB 350, Auto, Bucket Seats w/Console, Tach, Factory A/C, P/S ,P/B, Tilt 1998 Chevy 1500 Ext Cab 5.7, Pewter w/blue interior |
|
|
|
|
|
01-30-2013, 08:44 PM
|
#6 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: Trans linkage shifter connector for 700r4 swap
I am getting ready to install a 700r4 in place of the manual 4 speed and was hoping to use my th350 linkage.
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" 
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
