New member and new 64 GMC

[Idaho64GMC]

A couple weeks ago my uncle asked if I would pull the engine out of this pickup because he had put it in and wanted it for his 55 1st edition, He asked if I wanted to just keep the pickup and I said hell yes haha. My grandpa bought it new in 64, it was driven until about 97, always was a farm pickup from the day it was new. That being said this thing is really straight and clean and will be a fun project, a slow project as I'm fairly busy and not rich, but it will be fun. I'm 21, have always been a car nut, in fact I already restored a 1963 pontiac wagon that was also my grandpas, it's going to be really neat to have two of the rigs he had at the same time together again.

[RANDY COX]

cool,Welcome nice truck got any pixs of that wagon...

[Idaho64GMC]

Thanks, and I do have some of the Pontiac I just can't find them, will post asap for ya

[BigDan3131]

Welcome to the forums.

One thing for sure it already has that patina look some people like these days.

[Idaho64GMC]

Originally Posted by BigDan3131

Welcome to the forums.

One thing for sure it already has that patina look some people like these days.

oh yea that's for sure, I think I'll get it rolling when I figure out my engine and transmission combo and drive it as it is for awhile, may leave it that way. Obviously needs the front fenders fixed like most of these do but that's really the only rust on her

[Captainfab]

Welcome to the forum

Congrats on getting your Uncle's truck.

Where is Hollister located?

[jonzcustomshop]

Originally Posted by Captainfab

Welcome to the forum

Congrats on getting your Uncle's truck.

Where is Hollister located?

south of twin falls...


truck looks nice!

[creep]

Nice! That patina is just about perfect.

[McMurphy]

and glad you are sharing your build with us, as that looks like a fine project!
Cannot wait to see you tear into it, and what you may find!

I too would like to see your Pontiac, if you click the Tempest link in my signature you will see I am a fan of these orphaned cars !!

[Idaho64GMC]

Originally Posted by jonzcustomshop

south of twin falls...


truck looks nice!

yep Hollister is south of Twin Falls, about halfway between the nevada border and Twin.

Thanks for all the welcome's everyone! Can't wait to get started on this.

[Idaho64GMC]

For those who wanted to see my Pontiac here is the best pic I have. Disregard the for sale sign in the back window, I was toying with the idea of selling it last summer when I really needed money but I talked myself out of selling and kept the old girl.

[Idaho64GMC]

found a transmission today, a 78 TH350. That will be perfect behind my late 60's 350 chevy. this thing's very slowly coming together

[bubba327]

Hello and welcome. I always remember to honor that 35 MPH speed limit in Hollister as a slow spot in the otherwise high speed run to Jackpot Nevada!!
Glad you are keeping Grandpa memories going.
I wish I still had my Grandpas old yellow '48 5 window farm truck that was my irrigating rig on our dairy.
I was the only kid in grade school that could drive!!!!
ahh memories.. take pictures and have fun!!!

[Idaho64GMC]

Haha yea the 45 speed limit is about all most people notice about Hollister lol, blink and you'll miss the whole town

[Idaho64GMC]

Have been doing a lot of searching the past few days while the weather has been nasty and have come across most of the parts I need to get this old girl rolling, now I just wait for my tax return and I can get them all ordered

[markeb01]

Nice to see two rigs kept in the family. Both the truck and wagon look great. Looking forward to the progress updates. Welcome aboard!

[Idaho64GMC]

Thanks for the welcome! I took a couple more pics while doing some measurements today. The interior is dirty but in pretty good shape as far as paint and all that goes, especially considering it sat for probably ten years with the window down

[flips72]

welcome aboard, thats a good looking gmc and the pontiac is sweet too.cant wait ot see th build, i'm in.

[Idaho64GMC]

Hey thanks for the welcome Flips72

I washed my 350 and th350 combo today, getting ready to switch intake manifolds, rebuild my carb, paint the engine and bolt it all together. should be getting ready to put it in the pickup within the month of march

[Idaho64GMC]

Tore down my engine this week. I wasn't planning on rebuilding the engine but we found out that it had gotten water in 2 cylinders so we honed it, will re-ring it and give it a valve job. I'll hopefully have a few pics to put up in the next day or two

[Idaho64GMC]

Here is a few pics of my parts, I have a 1969 crate engine that was in a grain truck, only has about 20,000 miles on the engine so it is incredibly clean inside, no sludge or anything that a typical engine has. Unfortunately it got water in two cylinders even though it was kept in the truck for it's whole life so I had to hone it and will be re-ring and doing a valve job. I found a 78 TH350 to put behind that. the other pics are just miscellaneous parts, going from 2 barrel to a quadrajet and some little upgrades like that.

[da_bears_da1]

Looks like good progress. I have a 350 in mine with a TH400 behind it. Been working on the cab. Have you thought about headers? I have looked around and have not found seen ones that I know will clear the frame and starter.

[Idaho64GMC]

I haven't really looked at headers, I love the look of rams horns and I'm not going for super high performance so they aren't really on my to do list

[flips72]

if you decide to go with the ram horns check out dino's builds, the ones he use's are awesome.

[Idaho64GMC]

I got the engine put back together this week, rebuilt my carb and painted the engine. Will post pics soon, now I can get started on putting everything in the pickup as soon as I have time